Chwilio Deddfwriaeth

Chwiliad Uwch

The Electrical Equipment (Safety) Regulations 2016

Status:

Dyma’r fersiwn wreiddiol (fel y’i gwnaed yn wreiddiol).

Regulation 5

SCHEDULE 2Conformity Assessment Procedure

This Atodlen has no associated Memorandwm Esboniadol

Module A Internal production control

1.  Internal production control is the conformity assessment procedure whereby the manufacturer fulfils the obligations laid down in paragraphs 2, 3 and 4, and ensures and declares on the manufacturer’s sole responsibility that the electrical equipment concerned satisfies the principal elements of the safety objectives.

Technical documentation

2.—(1) The manufacturer must establish the technical documentation.

(2) The documentation must make it possible to assess the electrical equipment’s conformity to the relevant requirements, and must include an adequate analysis and assessment of the risk(s).

(3) The technical documentation must specify the applicable requirements and cover, as far as relevant for the assessment, the design, manufacture and operation of the electrical equipment.

(4) The technical documentation must, where applicable, contain at least the following elements—

(a)a general description of the electrical equipment;

(b)conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits, etc.;

(c)descriptions and explanations necessary for the understanding of those drawings and schemes and the operation of the electrical equipment;

(d)a list of the harmonised standards applied in full or in part the references to which have been published in the Official Journal or international or national standards referred to in regulation 37 and, where those harmonised standards or international or national standards have not been applied, descriptions of the solutions adopted to meet the principal elements of the safety objectives, including a list of other relevant technical specifications applied. In the event of partly applied harmonised standards or international or national standards referred to in regulation 37, the technical documentation must specify the parts which have been applied;

(e)results of design calculations made, examinations carried out, etc.; and

(f)test reports.

Manufacturing

3.  The manufacturer must take all measures necessary so that the manufacturing process and its monitoring ensure compliance of the manufactured electrical equipment with the technical documentation referred to in paragraph 2 and with the principal elements of the safety objectives.

CE marking and EU declaration of conformity

4.—(1) The manufacturer must affix the CE marking to each individual item of electrical equipment that satisfies the principal elements of the safety objectives.

(2) The manufacturer must draw up a written EU declaration of conformity for a product model and keep it together with the technical documentation at the disposal of the enforcing authorities for 10 years after the electrical equipment has been placed on the market. The EU declaration of conformity must identify the electrical equipment for which it has been drawn up.

(3) A copy of the EU declaration of conformity must be made available to the relevant market surveillance authorities upon request.

Authorised representative

5.  The manufacturer’s obligations set out in paragraph 4 may be fulfilled by the manufacturer’s authorised representative, on his behalf and under his responsibility, provided that they are specified in the mandate.

Yn ôl i’r brig

Options/Help

Print Options

Close

Mae deddfwriaeth ar gael mewn fersiynau gwahanol:

Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.

Gwreiddiol (Fel y’i Deddfwyd neu y’i Gwnaed): Mae'r wreiddiol fersiwn y ddeddfwriaeth fel ag yr oedd pan gafodd ei deddfu neu eu gwneud. Ni wnaed unrhyw newidiadau i’r testun.

Close

Dewisiadau Agor

Dewisiadau gwahanol i agor deddfwriaeth er mwyn gweld rhagor o gynnwys ar y sgrin ar yr un pryd

Close

Memorandwm Esboniadol

Mae Memoranda Esboniadol yn nodi datganiad byr o ddiben Offeryn Statudol ac yn rhoi gwybodaeth am ei amcan polisi a goblygiadau polisi. Maent yn ceisio gwneud yr Offeryn Statudol yn hygyrch i ddarllenwyr nad oes ganddynt gymhwyster cyfreithiol, ac maent yn cyd-fynd ag unrhyw Offeryn Statudol neu Offeryn Statudol Drafft a gyflwynwyd ger bron y Senedd o Fehefin 2004 ymlaen.

Close

Rhagor o Adnoddau

Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:

  • y PDF print gwreiddiol y fel deddfwyd fersiwn a ddefnyddiwyd am y copi print
  • rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
  • manylion rhoi grym a newid cyffredinol
  • pob fformat o’r holl ddogfennau cysylltiedig
  • slipiau cywiro
  • dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill
Close

Asesiadau Effaith

Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:

  • Why the government is proposing to intervene;
  • The main options the government is considering, and which one is preferred;
  • How and to what extent new policies may impact on them; and,
  • The estimated costs and benefits of proposed measures.
Close

Rhagor o Adnoddau

Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:

  • y PDF print gwreiddiol y fel gwnaed fersiwn a ddefnyddiwyd am y copi print
  • slipiau cywiro

liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys

  • rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
  • manylion rhoi grym a newid cyffredinol
  • pob fformat o’r holl ddogfennau cysylltiedig
  • dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill