The Producer Responsibility Obligations (Packaging Waste) Regulations 2007

Changes over time for: Paragraph 3

Alternative versions:

Changes to legislation:

There are currently no known outstanding effects for the The Producer Responsibility Obligations (Packaging Waste) Regulations 2007, Paragraph 3.

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

This adran has no associated Memorandwm Esboniadol

3.—(1) The amount of packaging waste to be [F2recycled] by a producer in relation to a class of producer to which he belongs is calculated as follows—E+W+S

where—

[F3“P” is the amount of packaging and packaging materials handled in Great Britain by the producer in the preceding year, calculated to the nearest tonne by—

(a)

taking into account packaging, including reused transit packaging, or packaging materials, which were imported into the United Kingdom by the producer; and

(b)

excluding—

(i)

reused sales packaging or primary packaging as defined in paragraph 1(a) of Article 3 of the Packaging Waste Directive;

(ii)

production residues from the production of packaging or packaging materials or from any other production process occurring before, during or after the producer handled the packaging or packaging materials;

(iii)

any packaging or packaging materials so supplied which were exported from the United Kingdom by the producer or which to the producer’s reasonable knowledge were otherwise exported from the United Kingdom (except to a marine installation); and

(iv)

reused transit packaging (except reused transit packaging imported into the United Kingdom);]

“C” is the percentage prescribed in paragraph 4 below in relation to the class of producer;

“X” is the percentage prescribed in paragraph 5 below as the [F4recycling] target for the relevant year; and

“Z” is the amount by tonnage of packaging waste which is to be [F5recycled] within the relevant year.

F6(2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(3) Where in the preceding year the producer has handled any recyclable material (whether in the form of packaging or packaging materials), the producer shall [F7recycle] an amount of packaging waste consisting of that material calculated as follows—

where—

“M” is the amount in tonnes to the nearest tonne of the recyclable material (whether in the form of packaging or packaging materials) handled in Great Britain by the producer in the preceding year;

“C” is the percentage prescribed in paragraph 4 below in relation to the class of producer;

“Y” is the percentage prescribed in paragraph 6 below as the recycling target for the relevant year; and

“Q” is the amount by tonnage of packaging waste consisting of that material which is to be recycled in the relevant year.

[F8(4) Where in the preceding year the producer has handled any glass (whether in the form of packaging or packaging materials), the producer shall recycle by re-melt an amount of glass packaging waste calculated as follows—

[F9 F10

where—

“L” is the amount to the nearest tonne of the glass (whether in the form of packaging or packaging materials) handled in Great Britain by the producer in the preceding year;
“B” is the percentage prescribed in paragraph 4 in relation to the class of producer;
[F11“Y” is the percentage prescribed in paragraph 6 as the recycling target in respect of glass in relation to the relevant year;]
F12...
“G” is the amount by tonnage of glass packaging waste which is to be recycled by re-melt in the relevant year.]]