- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made).
17.—(1) A manufacturer may, pursuant to the provisions of paragraphs 1 to 4 of Article 43 of the Type Approval Regulation (national type approval of small series), apply to the approval authority for recognition of a small series type approval granted to that manufacturer under the law of a member State other than the United Kingdom (a “non-UK type approval”).
(2) An application may not be made under paragraph (1) if an application in respect of the same type of vehicle has been made under regulation 15 and not withdrawn (and may not be proceeded with if an application under that regulation is made later).
(3) Not later than two months after receiving from the competent authority in that member State the type approval certificate and its attachments (including a statement of the technical provisions against which the vehicle type was approved), the approval authority must decide whether or not to accept the non-UK type approval.
(4) The type approval must be accepted unless the approval authority has reasonable grounds to believe that the technical provisions under which the approval was granted are not equivalent to those applying in the United Kingdom.
(5) If the approval is accepted, the approval authority must, as soon as practicable—
(a)notify—
(i)the applicant, and
(ii)the competent authority in the member State which granted it;
(b)issue a national small series type approval certificate.
(6) For the purposes of this regulation, the approval authority has reasonable grounds to believe that the technical provisions under which the approval was granted are not equivalent to those applying in the United Kingdom if (but not only if) the authority is not satisfied that—
(a)the applicant has made adequate arrangements (including for co-operating with the approval authority and the competent authority in the member State which granted the approval) to ensure that production vehicles, systems, components or separate technical units covered by the non-UK type approval conform to the approved type, or
(b)vehicles supplied in the United Kingdom will be constructed for use in left-hand traffic and use imperial and metric units of measurement for the speedometer.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: