- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Persistent Organic Pollutants (Amendment) (EU Exit) Regulations 2020, Section 28.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
28.—(1) Annex 5 is amended as follows.
(2) In Part 1—
(a)in the Table, in the entry for R4, in the second column, for the words from “as minimum requirements” to the end substitute “, as a minimum, the emission limit value for PCDDs and PCDFs set out immediately below this Table”;
(b)after the Table—
(i)omit endnote (1);
(ii)insert—
“The emission limit value for PCDDs and PCDFs is the average emission limit value of 0.1ng/Nm3 over a sampling period of a minimum of 6 hours and a maximum of 8 hours. The emission limit value refers to the total concentration of PCDDs and PCDFs.
To determine the total concentration of PCDDs and PCDFs, the mass concentration of a dibenzo-p-dioxin or dibenzofuran in the first column of the following Table is to be multiplied by the corresponding toxic equivalence factor in the second column before summing:
Substance | Toxic equivalence factor |
---|---|
2,3,7,8 — Tetrachlorodibenzodioxin (TCDD) | 1 |
1,2,3,7,8 — Pentachlorodibenzodioxin (PeCDD) | 0.5 |
1,2,3,4,7,8 — Hexachlorodibenzodioxin (HxCDD) | 0.1 |
1,2,3,6,7,8 — Hexachlorodibenzodioxin (HxCDD) | 0.1 |
1,2,3,7,8,9 — Hexachlorodibenzodioxin (HxCDD) | 0.1 |
1,2,3,4,6,7,8 — Heptachlorodibenzodioxin (HpCDD) | 0.01 |
Octachlorodibenzodioxin (OCDD) | 0.001 |
2,3,7,8 — Tetrachlorodibenzofuran (TCDF) | 0.1 |
2,3,4,7,8 — Pentachlorodibenzofuran (PeCDF) | 0.5 |
1,2,3,7,8 — Pentachlorodibenzofuran (PeCDF) | 0.05 |
1,2,3,4,7,8 — Hexachlorodibenzofuran (HxCDF) | 0.1 |
1,2,3,6,7,8 — Hexachlorodibenzofuran (HxCDF) | 0.1 |
1,2,3,7,8,9 — Hexachlorodibenzofuran (HxCDF) | 0.1 |
2,3,4,6,7,8 — Hexachlorodibenzofuran (HxCDF) | 0.1 |
1,2,3,4,6,7,8 — Heptachlorodibenzofuran (HpCDF) | 0.01 |
1,2,3,4,7,8,9 — Heptachlorodibenzofuran (HpCDF) | 0.01 |
Octachlorodibenzofuran (OCDF) | 0.001”. |
(3) In Part 2—
(a)in the first Table, in the fourth column, for point (2) substitute—
“(2) The provisions of the Landfill Regulations were respected.
(2A) In point (2), the “Landfill Regulations” means—
(a)in relation to England and Wales, the Environmental Permitting (England and Wales) Regulations 2016;
(b)in relation to Scotland, the Landfill (Scotland) Regulations 2003(1).”;
(b)in the endnotes after the first Table—
(i)omit endnotes (2), (4) and (5);
(ii)in endnote (6) for “European standards EN12766-1 and EN 12766-2” substitute “British standards BS EN 12766-1:2000, BS 2000-462:2001, BS EN 12766-2:2001 and BS 2000-462.2:2001(2)”.
S.S.I. 2003/235, amended by the Antisocial Behaviour etc. (Scotland) Act 2004 (asp. 8); and by S.S.I. 2003/343, 2009/247, 2010/60, 2011/226, 2012/148, 2012/360, 2013/222, 2015/188, 2018/391, 2019/26 (amendments pending).
A copy of the standards may be obtained by contacting the British Standards Institute at cservices@bsigroup.com or BSI Customer Services, 389 Chiswick High Road London, W4 4AL, United Kingdom.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: