The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019

Regulation 7

SCHEDULE 5 U.K. AMENDMENTS TO COMMISSION DELEGATED REGULATIONS RELATED TO ENERGY LABELLING

Commission Delegated Regulation (EU) No 1059/2010 U.K.

1.—(1) Commission Delegated Regulation (EU) 1059/2010 of 28 September 2010 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of household dishwashers is amended as follows.

(2) In Article 3 (responsibilities of suppliers), in subparagraph (c), for “Member States and to the Commission”, substitute “ [F1 Great Britain] ”.

(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F2 Great Britain] ”.

(4) Omit Article 7 (revision).

(5) At the end of Article 10 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(6) In Annex 1 (label), in subparagraph (2) of section 1, after “ ‘EU Ecolabel’”, insert “ before [F3 IP completion day] ”.

(7) In Annex 2 (product fiche), in paragraph 1(e), after “ ‘EU Ecolabel’”, insert “ before [F3 IP completion day] ”.

(8) In Annex 3 (technical documentation), in paragraph 1(c), for “harmonised”, substitute “ designated ”.

(9) In Annex 5 (product compliance verification by market surveillance authorities)—

(a) for each instance of “Member State” or “Member States”, substitute “ [F4 Great Britain] ”;

(b) omit subparagraph (7);

(c) for the third paragraph, substitute—

[F5 “Great Britain] authorities must use measurement procedures which take into account the generally recognised, state-of-the-art, reliable, accurate and reproducible measurement methods, and must use the measurement and calculation methods set out in Annex 7.”;

(d) in the fourth paragraph—

(i) for “7” substitute “ 6 ”; and

(ii) for “harmonised” substitute “ designated ”.

(10) In Annex 7 (method for calculating the Energy Efficiency Index, the Drying Efficiency Index and water consumption), in the first paragraph of section 2, omit the words from “, including” to “Union”.

Textual Amendments

F1 Words in Sch. 5 para. 1(2) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(i)

F2 Words in Sch. 5 para. 1(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(i)

F3 Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F4 Words in Sch. 5 para. 1(9)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(i)

F5 Words in Sch. 5 para. 1(9)(c) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(i)

Commencement Information

I1 Sch. 5 para. 1 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Commission Delegated Regulation (EU) No 1060/2010 U.K.

2.—(1) Commission Delegated Regulation (EU) No 1060/2010 of 28 September 2010 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of household refrigerating appliances is amended as follows.

(2) In Article 3 (responsibilities of suppliers), in subparagraph (c), for “Member States and to the Commission”, substitute “ [F6 Great Britain] ”.

(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F7 Great Britain] ”.

(4) Omit Article 7 (revision).

(5) At the end of Article 10 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(6) In Annex 2 (label)—

(a) in subparagraph (2) of section 1, after “ ‘EU Ecolabel’”, insert “ before [F3 IP completion day] ”;

(b) in subparagraph (2) of section 2, after “ ‘EU Ecolabel’”, insert “ before [F3 IP completion day] ”.

(7) In Annex 3 (product fiche), in paragraph 1(e), after “ ‘EU Ecolabel award’”, insert “ before [F3 IP completion day] ”.

(8) In Annex 4 (technical documentation), in paragraph 1(c), for “harmonised”, substitute “ designated ”.

(9) In Annex 6 (measurements), in paragraph 1, omit the words from “, including” to “Union”.

(10) In Annex 7 (product compliance verification by market surveillance authorities)—

(a) for each instance of “Member State” or “Member States”, substitute “ [F8 Great Britain] ”;

(b) omit subparagraph (7);

(c) in the fourth paragraph—

(i) for “7” substitute “ 6 ”; and

(ii) for “harmonised” substitute “ designated ”.

Textual Amendments

F3 Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F6 Words in Sch. 5 para. 2(2) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(ii)

F7 Words in Sch. 5 para. 2(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(ii)

F8 Words in Sch. 5 para. 2(10)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(ii)

Commencement Information

I2 Sch. 5 para. 2 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Commission Delegated Regulation (EU) No 1061/2010 U.K.

3.—(1) Commission Delegated Regulation (EU) No 1061/2010 of 28 September 2010 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of household washing machines is amended as follows.

(2) In Article 3 (responsibilities of suppliers), in subparagraph (c), for “Member States and to the Commission”, substitute “ [F9 Great Britain] ”.

(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F10 Great Britain] ”.

(4) Omit Article 7 (revision).

(5) At the end of Article 10 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(6) In Annex 1 (label), in subparagraph (2) of section 1, after “ ‘EU Ecolabel’”, insert “ before [F3 IP completion day] ”.

(7) In Annex 2 (product fiche), in paragraph 1(e), after “ ‘EU Ecolabel award’”, insert “ before [F3 IP completion day] ”.

(8) In Annex 3 (technical documentation), in paragraph 1(c), for “harmonised”, substitute “ designated ”.

(9) In Annex 5 (product compliance verification by market surveillance authorities)—

(a) for each instance of “Member State” or “Member States”, substitute “ [F11 Great Britain] ”;

(b) omit subparagraph (7);

(c) for the third paragraph, substitute—

[F12 “Great Britain] authorities must use measurement procedures which take into account the generally recognised, state-of-the-art, reliable, accurate and reproducible measurement methods, and must use the measurement and calculation methods set out in Annex 7.”;

(d) in the fourth paragraph—

(i) for “7” substitute “ 6 ”; and

(ii) for “harmonised” substitute “ designated ”.

Textual Amendments

F3 Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F9 Words in Sch. 5 para. 3(2) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(iii)

F10 Words in Sch. 5 para. 3(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(iii)

F11 Words in Sch. 5 para. 3(9)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(iii)

F12 Words in Sch. 5 para. 3(9)(c) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(iii)

Commencement Information

I3 Sch. 5 para. 3 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Commission Delegated Regulation (EU) No 1062/2010 U.K.

4.—(1) Commission Delegated Regulation (EU) No 1062/2010 of 28 September 2010 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of televisions is amended as follows.

(2) In Article 2 (definitions), for subparagraph (7) substitute—

“(7) ‘off mode’ means a condition in which the equipment is connected to a mains power source and is not providing any function other than—

(a) an indication of off mode condition; or

(b) functionalities intended only to ensure electromagnetic compatibility pursuant to the Electromagnetic Compatibility Regulations 2016;”.

(3) In Article 3 (responsibilities of suppliers), in paragraph 1(c), for “Member States and to the Commission”, substitute “ [F13 Great Britain] ”.

(4) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F14 Great Britain] ”.

(5) Omit Article 7 (revision).

(6) At the end of Article 9 (entry into force), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(7) In Annex 3 (product fiche), in paragraph 1(c), after “‘EU Ecolabel”, insert “ before [F3 IP completion day] ”.

(8) In Annex 4 (technical documentation), in subparagraph (c), for “harmonised”, substitute “ designated ”.

(9) In Annex 5 (label), in point 6 of subparagraph (a) of section 1, after “ ‘European Union Ecolabel’”, insert “ before [F3 IP completion day] ”.

(10) In Annex 7 (measurements), in paragraph 1, omit the words from “, including” to “Union”.

(11) In Annex 8 (product compliance verification by market surveillance authorities)—

(a) for each instance of “Member State” or “Member States”, substitute “ [F15 Great Britain] ”;

(b) omit subparagraph (7);

(c) in the fourth paragraph—

(i) for “7” substitute “ 6 ”; and

(ii) for “harmonised” substitute “ designated ”.

Textual Amendments

F3 Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F13 Words in Sch. 5 para. 4(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(iv)

F14 Words in Sch. 5 para. 4(4) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(iv)

F15 Words in Sch. 5 para. 4(11)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(iv)

Commencement Information

I4 Sch. 5 para. 4 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Commission Delegated Regulation (EU) No 626/2011 U.K.

5.—(1) Commission Delegated Regulation (EU) No 626/2011 of 4 May 2011 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of air conditioners is amended as follows.

(2) In Article 3 (responsibilities of suppliers), in paragraph 1(c) for “Member States and to the Commission”, substitute “ [F16 Great Britain] ”.

(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ the authorities of [F17 Great Britain] ”.

(4) Omit Article 7 (revision).

(5) At the end of Article 10 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(6) In Annex 1 (definitions applicable for the purposes of Annexes 2 to 7), for subparagraph (8) substitute—

“(8) ‘off mode’ means a condition in which the equipment is connected to a mains power source and is not providing any function other than—

(a) an indication of off mode condition; or

(b) functionalities intended only to ensure electromagnetic compatibility pursuant to the Electromagnetic Compatibility Regulations 2016;”.

(7) In Annex 3 (the label) in subparagraph (b) of—

(a) paragraph 1.1 of section 1, after “ ‘EU eco-label’”, insert “ before [F3 IP completion day] ”;

(b) paragraph 2.1 of section 2, after “ ‘EU eco-label’”, insert “ before [F3 IP completion day] ”;

(c) paragraph 3.1 of section 3, after “ ‘EU eco-label’”, insert “ before [F3 IP completion day] ”;

(d) paragraphs 4.1, 4.3 and 4.5 of section 4, in each instance, after “ ‘EU eco-label’”, insert “ before [F3 IP completion day] ”; and

(e) paragraphs 5.1, 5.3 and 5.5 of section 5, in each instance, after “ ‘EU eco-label’”, insert “ before [F3 IP completion day] ”.

(8) In Annex 4 (product fiche), for paragraph 1(c) substitute “where a model has been granted a ‘European Union eco-label’ under Regulation (EC) No 66/2010 before [F3 IP completion day], a copy of the eco-label may be added;”.

(9) In Annex 5 (technical documentation), in subparagraph (c), for “harmonised”, substitute “ designated ”.

(10) In Annex 7 (measurements and calculations), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.

(11) In Annex 8 (product compliance verification by market surveillance authorities)—

(a) for each instance of “Member State” or “Member States”, substitute “ [F18 Great Britain] ”;

(b) omit subparagraph (7);

(c) in the fourth paragraph—

(i) for “7” substitute “ 6 ”; and

(ii) for “harmonised” substitute “ designated ”.

Textual Amendments

F3 Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F16 Words in Sch. 5 para. 5(2) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(v)

F17 Words in Sch. 5 para. 5(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(v)

F18 Words in Sch. 5 para. 5(11)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(v)

Commencement Information

I5 Sch. 5 para. 5 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Commission Delegated Regulation (EU) No 392/2012 U.K.

6.—(1) Commission Delegated Regulation (EU) No 392/2012 of 1 March 2012 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of household tumble driers is amended as follows.

(2) In Article 3 (responsibilities of suppliers), in paragraph (c), for “Member States and to the Commission”, substitute “ [F19 Great Britain] ”.

(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F20 Great Britain] ”.

(4) Omit Article 7 (revision).

(5) At the end of Article 10 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(6) In Annex 1 (label)—

(a) in paragraph 1.2 of section 1, after “ ‘EU Ecolabel’”, insert “ before [F3 IP completion day] ”;

(b) in paragraph 2.2 of section 2, after “ ‘EU Ecolabel’”, insert “ before [F3 IP completion day] ”;

(c) in paragraph 3.2 of section 3, after “ ‘EU Ecolabel’”, insert “ before [F3 IP completion day] ”.

(7) In Annex 2 (product fiche), in paragraph 1(h), after “ ‘EU Ecolabel award’”, insert “ before [F3 IP completion day] ”.

(8) In Annex 3 (technical documentation), in paragraph 1(c), for “harmonised”, substitute “ designated ”.

(9) In Annex 5 (product compliance verification by market surveillance authorities)—

(a) for each instance of “Member State” or “Member States”, substitute “ [F21 Great Britain] ”;

(b) omit subparagraph (7);

(c) for the third paragraph, substitute—

[F22 “Great Britain] authorities must use measurement procedures which take into account the generally recognised, state-of-the-art, reliable, accurate and reproducible measurement methods, and must use the measurement and calculation methods set out in Annex 7.”;

(d) in the fourth paragraph—

(i) for “7” substitute “ 6 ”; and

(ii) for “harmonised” substitute “ designated ”.

Textual Amendments

F3 Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F19 Words in Sch. 5 para. 6(2) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(vi)

F20 Words in Sch. 5 para. 6(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(vi)

F21 Words in Sch. 5 para. 6(9)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(vi)

F22 Words in Sch. 5 para. 6(9)(c) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(vi)

Commencement Information

I6 Sch. 5 para. 6 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Commission Delegated Regulation (EU) No 874/2012 U.K.

7.—(1) Commission Delegated Regulation (EU) No 874/2012 of 12 July 2012 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of electrical lamps and luminaires is amended as follows.

(2) In Article 3 (responsibilities of suppliers)—

(a) [F23 in paragraph 1(b)], for the words “Member States and to the Commission”, substitute “ [F24 Great Britain] ”;

F25 (b) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(c) in the third paragraph, after “Directive 2009/125/EC” insert “ or other ecodesign legislation ”.

F26 (3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(4) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F27 Great Britain] ”.

(5) Omit Article 7 (revision).

(6) At the end of Article 10 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(7) In Annex 1 (label), in the final paragraph of section 1, after “ ‘EU ecolabel’” insert “ before [F3 IP completion day] ”.

(8) In Annex 3 (technical documentation)—

(a) in subparagraph (c), for “harmonised”, substitute “ designated ”;

(b) at the end of the second paragraph, insert “ or measures listed in paragraph 4 of Schedule 1 to the Ecodesign for Energy-Related Products Regulations 2010 ”.

(9) In Annex 5 (product compliance verification by market surveillance authorities)—

(a) for each instance of “Member State” or “Member States”, substitute “ [F28 Great Britain] ”;

(b) in section 1—

(i) omit subparagraph (4);

(ii) for the first paragraph, substitute—

[F29 “Great Britain] authorities must use measurement procedures which take into account the generally recognised, state-of-the-art, reliable, accurate and reproducible measurement methods, and must use the measurement and calculation methods set out in Annex 7.”;

(iii) in the second paragraph—

(aa) for “4” substitute “ 3 ”; and

(bb) for “harmonised” substitute “ designated ”.

Textual Amendments

F3 Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F23 Words in Sch. 5 para. 7(2)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 10(a)

F24 Words in Sch. 5 para. 7(2)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(vii)

F25 Sch. 5 para. 7(2)(b) omitted (31.12.2020 immediately before IP completion day) by virtue of The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 10(b)

F26 Sch. 5 para. 7(3) omitted (31.12.2020 immediately before IP completion day) by virtue of The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 10(b)

F27 Words in Sch. 5 para. 7(4) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(vii)

F28 Words in Sch. 5 para. 7(9)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(vii)

F29 Words in Sch. 5 para. 7(9)(b)(ii) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(vii)

Commencement Information

I7 Sch. 5 para. 7 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Prospective

Commission Delegated Regulation (EU) No 665/2013 U.K.

F30 8.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F30 Sch. 5 para. 8 omitted (31.12.2020 immediately before IP completion day) by virtue of The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 10(c)

Commission Delegated Regulation (EU) No 811/2013 U.K.

9.—(1) Commission Delegated Regulation (EU) No 811/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of space heaters, combination heaters, packages of space heater, temperature control and solar device and packages of combination heater, temperature control and solar device is amended as follows.

(2) In Article 3 (responsibilities of suppliers and timetable), in paragraphs 1(c), 2(c), 3(b), 4(b), 5(c) and 6(c), in each instance, for “Member States and to the Commission”, substitute “ [F31 Great Britain] ”.

(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F32 Great Britain] ”.

(4) Omit Article 7 (review).

(5) At the end of Article 8 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(6) In Annex 1 (definitions applicable for Annexes 2 to 8)—

(a) for subparagraph (11), substitute—

“(11) ‘conversion coefficient’ (CC) means a coefficient the value of which is CC = 2.5.”;

(b) for subparagraph (46), substitute—

“(46) ‘off mode’ means a condition in which the equipment is connected to a mains power source and is not providing any function other than—

(a) an indication of off mode condition; or

(b) functionalities intended only to ensure electromagnetic compatibility pursuant to the Electromagnetic Compatibility Regulations 2016;”.

(7) In Annex 3 (the labels), in subparagraph (b) of subsections 1.1.3 and 1.1.4, in both instances, after “ ‘EU Ecolabel’”, insert “ before [F3 IP completion day] ”.

(8) In Annex 5 (technical documentation), in subparagraph (c) of sections 1, 2, 3, 4, 5 and 6, in each instance, for “harmonised”, substitute “ designated ”.

(9) In Annex 7 (measurements and calculations), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.

(10) In Annex 8 (product compliance verification by market surveillance authorities)—

(a) for each instance of “Member State” or “Member States”, substitute “ [F33 Great Britain] ”;

(b) omit subparagraph (7);

(c) in the fourth paragraph—

(i) for “7” substitute “ 6 ”; and

(ii) for “harmonised” substitute “ designated ”.

Textual Amendments

F3 Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F31 Words in Sch. 5 para. 9(2) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(viii)

F32 Words in Sch. 5 para. 9(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(viii)

F33 Words in Sch. 5 para. 9(10)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(viii)

Commencement Information

I8 Sch. 5 para. 9 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Commission Delegated Regulation (EU) No 812/2013 U.K.

10.—(1) Commission Delegated Regulation (EU) No 812/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of water heaters, hot water storage tanks and packages of water heater and solar device is amended as follows.

(2) In Article 1 (subject matter and scope), in paragraph 2(c)—

(a) after “heaters” insert “ that immediately before [F3 IP completion day] would have been ”;

(b) after “Council”, insert “ , as that Directive had effect immediately before [F3 IP completion day] ”.

(3) In Article 3 (responsibilities of suppliers and timetable), in paragraphs 1(c), 2(c), 3(b) and 4(c), in each instance, for “Member States and to the Commission”, substitute “ [F34 Great Britain] ”.

(4) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F35 Great Britain] ”.

(5) Omit Article 7 (review).

(6) At the end of Article 8 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(7) In Annex 1 (definitions applicable for Annexes 2 to 9), for subparagraph (13), substitute—

“(13) ‘conversion coefficient’ (CC) means a coefficient the value of which is CC = 2.5.”.

(8) In Annex 3 (the labels), in subparagraph (b) of subsection 1.1.3, after “ ‘EU Ecolabel’” insert “ before [F3 IP completion day] ”.

(9) In Annex 5 (technical documentation), in subparagraph (c) in sections 1 to 4, in each instance, for “harmonised” substitute “ designated ”.

(10) In Annex 7 (measurements), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.

(11) In Annex 8 (method for calculating the water heating energy efficiency of water heaters), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.

(12) In Annex 9 (product compliance verification by market surveillance authorities)—

(a) for each instance of “Member State” or “Member States”, substitute “ [F36 Great Britain] ”;

(b) omit subparagraph (7);

(c) in the fourth paragraph—

(i) for “7” substitute “ 6 ”; and

(ii) for “harmonised” substitute “ designated ”.

Textual Amendments

F3 Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F34 Words in Sch. 5 para. 10(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(ix)

F35 Words in Sch. 5 para. 10(4) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(ix)

F36 Words in Sch. 5 para. 10(12)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(ix)

Commencement Information

I9 Sch. 5 para. 10 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Commission Delegated Regulation (EU) No 65/2014 U.K.

11.—(1) Commission Delegated Regulation (EU) No 65/2014 of 1 October 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of domestic ovens and range hoods is amended as follows.

(2) In Article 2 (definitions), for subparagraph (19), substitute—

“(19) ‘off mode’ means a condition in which the equipment is connected to a mains power source and is not providing any function other than—

(a) an indication of off mode condition; or

(b) functionalities intended only to ensure electromagnetic compatibility pursuant to the Electromagnetic Compatibility Regulations 2016;”.

(3) In Article 3 (responsibilities of suppliers and timetable), in subparagraphs (1)(a)(iii) and (1)(b)(iii), in both instances, for “Member States” substitute “ [F37 Great Britain] ”.

(4) In Article 6 (verification procedure for market surveillance purposes), for “Member States'”, substitute “ [F38 Great Britain] ”.

(5) Omit Article 7 (review).

(6) At the end of Article 10 (entry into force and application), in the final paragraph, omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(7) In Annex 2 (measurements and calculations), in the first paragraph, omit the words from “, including” to “Union”.

(8) In Annex 4 (fiche), for paragraph 2 of section A, substitute “ Where a model has been granted a European Union eco-label under Regulation (EC) No 66/2010 of the European Parliament and of the Council of 25 November 2009 before [F3 IP completion day], a copy of the eco-label may be added ”.

(9) In Annex 5 (technical documentation), in paragraph 1(e) of section A and paragraph 1(e) of Section B, in both instances, for “harmonised”, substitute “ designated ”.

(10) In Annex 8 (product compliance verification by market surveillance authorities)—

(a) for each instance of “Member State” or “Member States”, substitute “ [F39 Great Britain] ”;

(b) omit subparagraph (7);

(c) in the fourth paragraph—

(i) for “7” substitute “ 6 ”; and

(ii) for “harmonised” substitute “ designated ”.

Textual Amendments

F3 Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F37 Words in Sch. 5 para. 11(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(x)

F38 Words in Sch. 5 para. 11(4) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(x)

F39 Words in Sch. 5 para. 11(10)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(x)

Commencement Information

I10 Sch. 5 para. 11 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Commission Delegated Regulation (EU) No 1254/2014 U.K.

12.—(1) Commission Delegated Regulation (EU) No 1254/2014 of 11 July 2014 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of residential ventilation units is amended as follows.

(2) In Article 1 (subject matter and scope), in paragraph 2(b), after “Council”, insert “ , as it had effect immediately before [F3 IP completion day] ”.

(3) In Article 2 (definitions), after “Regulation the” insert “ definitions in Regulation (EU) 2017/1369 of the European Parliament and of the Council of 4 July 2017 setting a framework for energy labelling and repealing Directive 2010/30/EU as well as the ”.

(4) In Article 3 (responsibilities of suppliers), in paragraph 1(c), for “Member State authorities and the Commission” substitute “ authorities of [F40 Great Britain] ”.

(5) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ the authorities of [F41 Great Britain] ”.

(6) Omit Article 7 (review).

(7) At the end of Article 8 (entry into force), in the second paragraph, omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(8) In Annex 5 (technical documentation), in subparagraph (c), for “harmonised” substitute “ designated ”.

(9) In Annex 9 (product compliance verification by market surveillance authorities)—

(a) for each instance of “Member State” or “Member States”, substitute “ [F42 Great Britain] ”;

(b) omit subparagraph (7);

(c) in the fourth paragraph—

(i) for “7” substitute “ 6 ”; and

(ii) for “harmonised” substitute “ designated ”.

Textual Amendments

F3 Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F40 Words in Sch. 5 para. 12(4) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(x)

F41 Words in Sch. 5 para. 12(5) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(x)

F42 Words in Sch. 5 para. 12(9)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(xi)

Commencement Information

I11 Sch. 5 para. 12 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Commission Delegated Regulation (EU) 2015/1094 U.K.

13.—(1) Commission Delegated Regulation (EU) 2015/1094 of 5 May 2015 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of professional refrigerated storage cabinets is amended as follows.

(2) In Article 2 (definitions), after “The” insert “ definitions in the Energy Information Regulations 2011 as well as the ”.

(3) In Article 3 (responsibilities of suppliers and timetable), in paragraph 1(e), for “Member States” substitute “ [F43 Great Britain] ”.

(4) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F44 Great Britain] ”.

(5) Omit Article 7 (review).

(6) At the end of Article 8 (entry into force and application), in the second paragraph, omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(7) In Annex 3 (labels)—

(a) in the second paragraph of section 1, after “ ‘EU ecolabel’” insert “ before [F3 IP completion day] ”;

(b) in the second paragraph of section 2, after “ ‘EU eco-label’” insert “ before [F3 IP completion day] ”.

(8) In Annex 4 (product fiche), in paragraph 1(e), after “ ‘EU eco-label’” insert “ before [F3 IP completion day] ”.

(9) In Annex 5 (technical documentation)—

(a) in paragraph 1(c), for “harmonised”, substitute “ designated ”;

(b) at the end of paragraph 3, insert “ or measures listed in paragraph 4 of Schedule 1 to the Ecodesign for Energy-Related Products Regulations 2010 ”.

(10) In Annex 9 (measurement and calculation), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.

(11) In Annex 10 (product compliance verification by market surveillance authorities)—

(a) for each instance of “Member State” or “Member States”, substitute “ [F45 Great Britain] ”;

(b) omit subparagraph (7);

(c) in the fourth paragraph—

(i) for “7” substitute “ 6 ”; and

(ii) for “harmonised” substitute “ designated ”.

Textual Amendments

F3 Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F43 Words in Sch. 5 para. 13(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(xii)

F44 Words in Sch. 5 para. 13(4) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(xi)

F45 Words in Sch. 5 para. 13(11)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(xii)

Commencement Information

I12 Sch. 5 para. 13 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Commission Delegated Regulation (EU) 2015/1186 U.K.

14.—(1) Commission Delegated Regulation (EU) 2015/1186 of 24 April 2015 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of local space heaters is amended as follows.

(2) In Article 3 (responsibilities of suppliers and timetable), in paragraphs 1(e) and 2(e), in both instances, for “Member States and to the Commission”, substitute “ [F46 Great Britain] ”.

(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F47 Great Britain] ”.

(4) Omit Article 7 (review).

(5) At the end of Article 8 (entry into force), in the final paragraph, omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(6) In Annex 5 (technical documentation)—

(a) in paragraph (c), for “harmonised”, substitute “ designated ”;

(b) at the end of the second paragraph, insert “ or measures listed in paragraph 4 of Schedule 1 to the Ecodesign for Energy-Related Products Regulations 2010 ”.

(7) In Annex 8 (measurements and calculations), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.

(8) In Annex 9 (product compliance verification by market surveillance authorities)—

(a) for each instance of “Member State” or “Member States”, substitute “ [F48 Great Britain] ”;

(b) omit subparagraph (7);

(c) in the fourth paragraph—

(i) for “7” substitute “ 6 ”; and

(ii) for “harmonised” substitute “ designated ”.

Textual Amendments

F46 Words in Sch. 5 para. 14(2) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(xiii)

F47 Words in Sch. 5 para. 14(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(xii)

F48 Words in Sch. 5 para. 14(8)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(xiii)

Commencement Information

I13 Sch. 5 para. 14 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Commission Delegated Regulation (EU) 2015/1187 U.K.

15.—(1) Commission Delegated Regulation (EU) 2015/1187 of 27 April 2015 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of solid fuel boilers and packages of a solid fuel boiler, supplementary heaters, temperature controls and solar devices is amended as follows.

(2) In Article 3 (responsibilities of suppliers and timetable), in paragraphs 1(e) and 3(e), in both instances, for “Member States and to the Commission”, substitute “ [F49 Great Britain] ”.

(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F50 Great Britain] ”.

(4) Omit Article 7 (review).

(5) At the end of Article 8 (entry into force), in the last paragraph, omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(6) In Annex 1 (definitions applicable to Annexes 2 to 10), for subparagraph (5), substitute—

“(5) ‘conversion coefficient’ (CC) means a coefficient the value of which is CC = 2.5.”.

(7) In Annex 3 (the labels), in subparagraph (b) of subsections 1.1 and 1.2, in both instances, after “ ‘EU Ecolabel’”, insert “ before [F3 IP completion day] ”.

(8) In Annex 5 (technical documentation)—

(a) in subparagraph (c) of section 1 and section 2, in both instances, for “harmonised” substitute “ designated ”;

(b) at the end of the second unnumbered paragraph in section 1, after “Directive 2009/125/EC of the European Parliament and of the Council”, insert “ or measures listed in paragraph 4 of Schedule 1 to the Ecodesign for Energy-Related Products Regulations 2010 ”.

(9) In Annex 8 (measurements and calculations), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.

(10) In Annex 10 (product compliance verification by market surveillance authorities)—

(a) for each instance of “Member State” or “Member States”, substitute “ [F51 Great Britain] ”;

(b) omit subparagraph (7);

(c) in the fourth paragraph—

(i) for “7” substitute “ 6 ”; and

(ii) for “harmonised” substitute “ designated ”.

Textual Amendments

F3 Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F49 Words in Sch. 5 para. 15(2) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(xiv)

F50 Words in Sch. 5 para. 15(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(xiii)

F51 Words in Sch. 5 para. 15(10)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(xiv)

Commencement Information

I14 Sch. 5 para. 15 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)