- Latest available (Revised)
- Point in Time (03/08/2017)
- Original (As made)
Version Superseded: 21/04/2018
Point in time view as at 03/08/2017.
There are currently no known outstanding effects for the The Recreational Craft Regulations 2017, MANUFACTURERS.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
8. Before placing a product on the market, a manufacturer must ensure that it has been designed and manufactured in accordance with the essential requirements.
Commencement Information
I1Reg. 8 in force at 3.8.2017, see reg. 1
9. Before placing a product on the market a manufacturer must—
(a)have a relevant conformity assessment procedure carried out; and
(b)draw up—
(i)the technical documentation referred to in Schedule 9; and
(ii)any other technical documentation required as part of the relevant conformity assessment procedure to demonstrate the means used by the manufacturer to ensure that the product complies with the essential requirements.
Commencement Information
I2Reg. 9 in force at 3.8.2017, see reg. 1
10.—(1) Where the conformity of a product with the essential requirements has been demonstrated by a relevant conformity assessment procedure, the manufacturer must, before placing the product on the market—
(a)draw up the EU declaration of conformity in accordance with regulation 53 (EU declaration of conformity); and
(b)affix the CE marking to the product in accordance with regulation 54 (CE marking).
(2) The EU declaration of conformity must follow the format set out in Schedule 4 (EU Declaration of conformity), and be translated into a language required by the Member State where the product will be made available or put into service, unless paragraph (3) applies.
(3) If an EU declaration of conformity relates to a partly completed watercraft, that declaration must follow the format set out in Schedule 3 and be translated into a language required by the Member State where the partly completed watercraft will be made available or put into service.
(4) The manufacturer must keep the EU declaration of conformity up-to-date.
(5) Where a product is subject to more than one EU instrument requiring a declaration of conformity to be drawn up, the manufacturer must draw up a single declaration of conformity, which—
(a)identifies all of the applicable EU instruments; and
(b)includes references to the publication of those EU instruments in the Official Journal of the European Union
Commencement Information
I3Reg. 10 in force at 3.8.2017, see reg. 1
11. A manufacturer must keep the technical documentation and the EU declaration of conformity drawn up in respect of a product for a period of 10 years beginning with the day on which the product is placed on the market.
Commencement Information
I4Reg. 11 in force at 3.8.2017, see reg. 1
12.—(1) The manufacturer of a product which is manufactured by series production must ensure that, before placing the product on the market, procedures are in place to ensure that any product so manufactured will be in conformity with the manufacturer’s obligations under Part 2.
(2) In doing so, the manufacturer must take adequate account of—
(a)any changes in the design or characteristics of a product; and
(b)any changes in the harmonised standard or in another technical specification by reference to which the EU declaration of conformity of the product was drawn up.
Commencement Information
I5Reg. 12 in force at 3.8.2017, see reg. 1
13.—(1) Before placing a product on the market, a manufacturer must indicate on the product—
(a)a type, batch or serial number; or
(b)another element which identifies the manufacturer as the manufacturer of the product;
(2) Where, in the case of a component, it is not possible to indicate the information on the component because of the size or nature of the component, the manufacturer must provide the information specified in paragraph (1)—
(a)on the packaging; or
(b)in a document accompanying the component.
Commencement Information
I6Reg. 13 in force at 3.8.2017, see reg. 1
14.—(1) Before placing a product on the market, a manufacturer must ensure that the product is labelled with—
(a)the manufacturer’s name;
(b)their registered trade name or registered trade mark; and
(c)an address, which is the single point at which they can be contacted.
(2) Where it is not possible to provide the information referred to in paragraph (1) on the product that information must be provided—
(a)on the packaging;
(b)or in a document accompanying the product.
Commencement Information
I7Reg. 14 in force at 3.8.2017, see reg. 1
15.—(1) When placing a product on the market, a manufacturer must ensure that it is accompanied by instructions and safety information in a language which can be easily understood by consumers and other end-users in the Member State in which the product is to be made available.
(2) When the product is being made available to consumers and other end-users in the United Kingdom, that language which can be easily understood is English.
Commencement Information
I8Reg. 15 in force at 3.8.2017, see reg. 1
16.—(1) A manufacturer who considers or has reason to believe that a product that it has placed on the market is not in conformity Part 2, must immediately take the corrective measures necessary to—
(a)bring the product into conformity;
(b)withdraw the product from the market; or
(c)recall it.
(2) Where the product presents a risk, the manufacturer must immediately inform the market surveillance authority and the competent national authorities in any Member State in which the manufacturer has made the product available on the market of the risk, giving details of—
(a)the reason why the product is not considered to be in conformity; and
(b)any corrective measures taken.
Commencement Information
I9Reg. 16 in force at 3.8.2017, see reg. 1
17.—(1) A manufacturer must, following a reasoned request from an enforcing authority, provide it with all of the information and documentation necessary to demonstrate the conformity of the product with the requirements of this Part.
(2) The information and documentation referred to in paragraph (1) must be in a language that can be easily understood by the enforcing authority.
(3) The manufacturer must, at the request of the enforcing authority, co-operate with the authority on any action taken to eliminate the risks posed by a product that the manufacturer has placed on the market.
Commencement Information
I10Reg. 17 in force at 3.8.2017, see reg. 1
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: