Search Legislation

The Private Water Supplies (England) Regulations 2016

Changes over time for: SCHEDULE 1

 Help about opening options

Alternative versions:

Status:

Point in time view as at 31/12/2020.

Changes to legislation:

There are currently no known outstanding effects for the The Private Water Supplies (England) Regulations 2016, SCHEDULE 1. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

Regulations 4, 9 and 11

SCHEDULE 1U.K.Prescribed concentrations or values

This schedule has no associated Explanatory Memorandum

PART 1U.K.Wholesomeness

Table A

MICROBIOLOGICAL PARAMETERS

Prescribed concentrations or values

ParametersMaximum concentration or valueUnits of measurement
[F1E. coli] 0Number/100ml
Enterococci0Number/100ml
In the case of water in bottles or containers:
Colony count 22°C100Number/ml
F2. . .F2. . .F2. . .
[F1E. coli] 0Number/250ml
Enterococci0Number/250ml
Pseudomonas aeruginosa0Number/250ml

Table B

CHEMICAL PARAMETERS

Part I: Directive requirements - prescribed concentration or values

1 The parametric value refers to the residual monomer concentration in the water as calculated according to specifications of the maximum release from the corresponding polymer in contact with the water. This is controlled by product specification.

2 See also the nitrate-nitrite formula in regulation 4(c).

3 For these purposes, “pesticides” means—

For these purposes, “pesticides” means—

  • — organic acaricides;

  • — organic algicides;

  • — organic fungicide;

  • — organic herbicides;

  • — organic insecticides;

  • — organic nematocides;

  • — organic rodenticides;

  • — organic slimicides;

  • — related products (inter alia, growth regulators and their relevant metabolites, degradation and reaction products). Only those pesticides likely to be present in a given supply need be monitored.

4Pesticides total” means the sum of the concentrations of the individual pesticides detected and quantified in the monitoring process.

5 The specified compounds are—

  • The specified compounds are—

    • — benzo(b)fluoranthene;

    • — benzo(k)fluoranthene;

    • — benzo(ghi)perylene;

    • — indeno(1,2,3-cd)pyrene.

  • The parametric value applies to the sum of the concentrations of the individual compounds detected and quantified in the monitoring process.

6 The parametric value applies to the sum of the concentrations of the individual compounds detected and quantified in the monitoring process.

7 The specified compounds are—

  • The specified compounds are—

    • — bromodichloromethane;

    • — bromoform;

    • — chloroform;

    • — dibromochloromethane

  • The parametric value applies to the sum of the concentrations of the individual compounds detected and quantified in the monitoring process.

ParametersMaximum concentration or valueUnits of measurement
Acrylamide10.10μg/l
Antimony5.0μg/l
Arsenic10μg/l
Benzene1.0μg/l
Benzo(a)pyrene0.010μg/l
Boron1.0mg/l
Bromate10μg/l
Cadmium5.0μg/l
Chromium50μg/l
Copper2.0mg/l
Cyanide50μg/l
1, 2 dichloroethane3.0μg/l
Epichlorohydrin10.10μg/l
Fluoride1.5mg/l
Lead10μg/l
Mercury1.0μg/l
Nickel20μg/l
Nitrate250mg/l
Nitrite20.5 (or 0.1 in the case of treatment works)mg/l
Pesticides3
Aldrin0.030μg/l
Dieldrin0.030μg/l
Heptachlor0.030μg/l
Heptachlor epoxide0.030μg/l
Other pesticides0.10μg/l
Pesticides total40.50μg/l
Polycyclic aromatic hydrocarbons50.10μg/l
Selenium10μg/l
Tetrachloroethene and Trichloroethene610μg/l
Trihalomethanes: Total7100μg/l
Vinyl chloride10.50μg/l
Part II: National requirements – prescribed concentrations or values
ParametersMaximum concentration or valueUnits of measurement
Aluminium200μg/l
Colour20mg/l Pt/Co
Iron200μg/l
Manganese50μg/l
OdourAcceptable to consumers and no abnormal change
Sodium200mg/l
TasteAcceptable to consumers and no abnormal change
Tetrachloromethane3μg/l
Turbidity4NTU

PART 2U.K.Indicator parameters (excluding radioactive substances)

Table C

Prescribed concentrations, values or states

1 The water should not be aggressive.

2 Only in the case of surface water or groundwater that has been influenced by surface water.

ParametersMaximum concentration or value or state (unless otherwise stated)Units of measurement
Ammonium0.50mg/l
Chloride1250mg/l
Clostridium perfringens (including spores)0Number/100ml
Number/100ml (Number/250
Coliform bacteria0ml in the case of water put into bottles of containers)
F3. . .F4. . .
Colony countsNo abnormal changeNumber/ml at [F522°C]
Conductivity12500μS/cm at 20°C
Hydrogen ion9.5 (maximum)pH value
6.5 (minimum) (in the case of
still water put into bottles or containers the minimum is 4.5)pH value
Sulphate1250mg/l
Total organic carbon (TOC)No abnormal changemgC/l
Turbidity21NTU

PART 3 U.K.Indicator parameters (radioactive substances)

Table D

Parametric values for indicative does, randon and tritium of water intended for human consumption

1 Where treatment to reduce the level of radionuclides in water intended for human consumption has been taken, monitoring must be carried out under Part 1 of Schedule 2 to ensure the continued efficacy of the treatment.

2 Enforcement action by a local authority is deemed justified on radiological protection grounds without further consideration where randon concentrates exceed 1,000 Bq/1.

3 If tritium concentration exceeds its parametric value, an investigation (which may include analysis) of the presence of artificial radionuclides must be carried out.

ParametersMaximum concentration or value or state (unless otherwise stated)Units of measurements
Indicative dose (for radioactivity10.10mSv
Gross alpha0.1Bq/1
Gross beta1.0Bq/1
Radon2100Bq/1
Tritium (for radioactivity)3100Bq/1

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources