- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Measuring Instruments Regulations 2016, Paragraph 8.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
8.—(1) Where a measuring system is marked with—
(a)a temperature range, it must not be used for trade in temperatures outside that range; and
(b)a flowrate range, it must not be used for trade at a flowrate outside that range.
(2) A measuring system must not be used for trade unless it is marked in a manner which is sufficiently clear to enable the buyer to identify the product which that measuring system delivers but this paragraph does not apply where the measuring system is used in the absence of the buyer.
(3) A measuring system must not be used for trade in circumstances which are likely prematurely to degrade its metrological characteristics.
(4) A measuring system must not be used for trade unless the sales indicator—
(a)is set to zero before measurement of the liquid fuel commences;
(b)remains at zero until that fuel starts to emerge from the system;
(c)is not reset to zero during measurement of that fuel; and
(d)cannot be advanced by any means other than by the discharge of that fuel from the system and the proper operation of the system.
(5) If a measuring system is adjusted, it must not be used for trade unless the calibration of the system is set as close to zero error as is practicable.
(6) Where a measuring system used for trade bears a mark (other than a mark referred to in paragraph (1)) which signifies the manner and purpose of use, that system must not be used in a manner or for a purpose which does not accord with that marking.
(7) A measuring system must not be used in circumstances in which it may be prevented from operating consistently or accurately.
(8) Nothing in paragraphs (6) or (7) shall prevent the use for trade of a measuring system where a buyer chooses to take a delivery which is less than the minimum measured quantity.
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: