Search Legislation

Advanced Search

The Air Quality Standards Regulations 2010

Status:

This is the original version (as it was originally made).

Assessment criteria

This section has no associated Explanatory Memorandum

6.—(1) The Secretary of State must assess the level of sulphur dioxide, nitrogen dioxide and oxides of nitrogen, particulate matter, lead, benzene and carbon monoxide in ambient air in all zones.

(2) In all zones where the level of those pollutants exceeds the upper assessment threshold referred to in regulation 5, fixed measurements must be used, but may be supplemented by modelling or indicative measurements or both in order to provide adequate information on the spatial distribution of the ambient air quality.

(3) In all zones where the level of those pollutants is below the lower assessment threshold referred to in regulation 5, modelling or estimation techniques or both may be used instead of measurement.

(4) In all other zones a combination of fixed measurements together with modelling or indicative measurements or both may be used.

(5) In addition to the measurements referred to in paragraphs (1) to (4), the Secretary of State must measure PM2.5 at rural background locations away from significant sources of air pollution, in order to provide information on an annual average basis on the total mass concentration and chemical speciation concentrations of that pollutant.

(6) For the purposes of paragraphs (1) to (4), measurements must be carried out in accordance with the criteria set out in sections A and C of Annex I to Directive 2008/50/EC, and for the purposes of paragraph (5), measurements must be carried out in accordance with the criteria set out in Annex IV to the same Directive.

(7) Save as provided for in paragraph (8), measurements for the purposes of this regulation must be taken in accordance with the reference measurement methods specified in Section A and Section C of Annex VI to Directive 2008/50/EC.

(8) Alternative methods to those referred to in paragraph (7) may be used provided the conditions set out in Section B of that Annex are complied with.

(9) Where measurements are supplemented by modelling or indicative measurement then the Secretary of State must take account of the results of those supplementary methods in assessing ambient air quality for the purposes of these Regulations.

(10) In this Regulation, “chemical speciation concentrations” means the concentrations of different chemical components or species of PM2.5.

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Impact Assessments

Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:

  • Why the government is proposing to intervene;
  • The main options the government is considering, and which one is preferred;
  • How and to what extent new policies may impact on them; and,
  • The estimated costs and benefits of proposed measures.
Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources