Search Legislation

The Plant Health (Forestry) Order 2005

Status:

This is the original version (as it was originally made).

PART ARelevant material, from third countries, which may only be landed in Great Britain if special requirements are satisfied

(1)(2)(3)
ItemDescription of relevant materialRequirements of landing
1.

Wood of conifers (Coniferales), except that of Thuja L., other than in the form of:

  • chips, particles, sawdust, shavings, wood waste or scrap obtained in whole or in part from these conifers,

  • wood packaging material,

  • dunnage, or

  • wood of Libocedrus decurrens Torr. where there is evidence that the wood has been processed or manufactured for pencils using heat treatment to achieve a minimum temperature of 82°C for a 7 to 8 day period,

but including that which has not kept its natural round surface, originating in Canada, China, Japan, the Republic of Korea, Mexico, Taiwan or the USA, where Bursaphelenchus xylophilus (Steiner and Bührer) Nickle et al. is known to occur

The wood shall be accompanied by an official statement that it has undergone an appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes, and there shall be evidence of that heat treatment by a mark “HT” put on the wood or on any wrapping in accordance with current usage, and on the phytosanitary certificate or phytosanitary certificate for re-export
2.Wood of conifers (Coniferales), except that of Thuja L., in the form of chips, particles, sawdust, shavings, wood waste or scrap obtained in whole or in part from these conifers, originating in Canada, China, Japan, the Republic of Korea, Mexico, Taiwan or the USA, where Bursaphelenchus xylophilus (Steiner and Bührer) Nickle et al. is known to occurThe wood shall be accompanied by an official statement that it has undergone an appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes, the latter to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export
3.

Wood of Thuja L., other than in the form of:

  • chips, particles, sawdust, shavings, wood waste or scrap,

  • wood packaging material, or

  • dunnage,

originating in Canada, China, Japan, the Republic of Korea, Mexico, Taiwan, or the USA where Bursaphelenchus xylophilus (Steiner and Bührer) Nickle et al. is known to occur

The wood shall be accompanied by an official statement that it:

(a)

is bark-free;

(b)

has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognised mark, put on the wood or on any wrapping in accordance with current usage; or

(c)

has undergone appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes and there shall be evidence of that heat treatment by a mark “HT”:

(i)

put on the wood or on any wrapping in accordance with current usage, and

(ii)

on the phytosanitary certificate or phytosanitary certificate for re-export

4.Wood of Thuja L., in the form of chips, particles, sawdust, shavings, wood waste or scrap, originating in Canada, China, Japan, the Republic of Korea, Mexico, Taiwan or the USA, where Bursaphelenchus xylophilus (Steiner and Bührer) Nickle et al. is known to occur

The wood shall be accompanied by an official statement that it:

(a)

has been produced from debarked round wood;

(b)

has undergone kiln drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule; or

(c)

has undergone an appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes, the latter to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export

5.

Wood of conifers (Coniferales), other than in the form of:

  • chips, particles, sawdust, wood waste or scrap obtained in whole or in part from these conifers,

  • wood packaging material, or

  • dunnage,

but including that which has not kept its natural round surface, originating in Russia, Kazakhstan or Turkey

The wood shall be accompanied by an official statement that it:

(a)

originates in an area or areas known to be free from:

  • Monochamus spp. (non-European),

  • Pissodes spp. (non-European), and

  • Scolytidae spp. (non-European),

and that area shall be mentioned in the phytosanitary certificate or phytosanitary certificate for re-export under the rubric “place of origin”;

(b)

is bark-free and free from grub holes which are caused by the genus Monochamus spp. (non-European), defined for this purpose as those which are larger than 3mm across;

(c)

has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognised mark put on the wood or on any wrapping in accordance with the current usage; or

(d)

has undergone an appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes and there shall be evidence of that heat treatment by a mark “HT”:

(i)

put on the wood or on any wrapping in accordance with current usage, and

(ii)

on the phytosanitary certificate or phytosanitary certificate for re-export

6.

Wood of conifers (Coniferales) other than in the form of:

  • chips, particles, sawdust, shavings, wood waste or scrap obtained in whole or in part from these conifers,

  • wood packaging material, or

  • dunnage,

but including that which has not kept its natural round surface, originating in third countries, other than:

  • Russia, Kazakhstan or Turkey;

  • European countries; or

  • Canada, China, Japan, the Republic of Korea, Mexico, Taiwan, or the USA, where Bursaphelenchus xylophilus (Steiner and Bührer) Nickle et al. is known to occur

The wood shall be accompanied by an official statement that it:

(a)

is bark-free and free from grub holes which are larger than 3mm across and which are caused by the genus Monochamus spp. (non-European);

(b)

has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “Kiln-dried” or “KD” or another internationally recognised mark put on the wood or on any wrapping in accordance with current usage; or

(c)

has undergone an appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes, and there shall be evidence of that heat treatment by a mark “HT”:

(i)

put on the wood or on any wrapping in accordance with current usage, and

(ii)

on the phytosanitary certificate or phytosanitary certificate for re-export

7.

Wood in the form of chips, particles, sawdust, shavings, wood waste or scrap obtained in whole or in part from conifers (Coniferales), originating in:

  • Russia, Kazakhstan or Turkey, or

  • non-European countries other than Canada, China, Japan, the Republic of Korea, Taiwan or the USA, where Bursaphelenchus xylophilus (Steiner and Bührer) Nickle et al. is known to occur

The wood shall be accompanied by an official statement that it:

(a)

originates in an area or areas known to be free from :

  • Monochamus spp. (non-European),

  • Pissodes spp. (non-European), and

  • Scolytidae spp. (non-European),

and that area shall be mentioned in the phytosanitary certificate or phytosanitary certificate for re-export under the rubric “place of origin”;

(b)

has been produced from debarked round wood;

(c)

has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved though an appropriate time/temperature schedule; or

(d)

has undergone an appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes, the latter to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export

8.

Wood packaging material,

other than in the form of:

  • raw wood of 6mm thickness or less; or

  • wood that has undergone a manufacturing process involving glue, heat or pressure or a combination thereof,

coming from any third country except Switzerland

The wood packaging material shall:

(a)

be subject to one of the approved measures specified in Annex I to ISPM No.15; and

(b)

display a mark which shall contain as specified in Annex II to ISPM No. 15:

(i)

the two-letter ISO country code;

(ii)

a code identifying the producer;

(iii)

the code identifying the approved measure to which the wood packaging material has been subject in accordance with paragraph (a); and

(iv)

the logo, with effect from 1st March 2005, or in respect of wood packaging material manufactured, repaired or recycled before that date, from 31st December 2007

9.

Wood of Acer saccharum Marsh., including wood which has not kept its natural round surface, other than in the form of:

  • wood intended for the production of veneer sheets; or

  • chips, particles, sawdust, shavings, wood waste or scrap,

originating in the USA or Canada

The wood shall be accompanied by an official statement that it that it has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognized mark, put on the wood or on any wrapping in accordance with current usage
10.Wood of Acer saccharum Marsh., intended for the production of veneer sheets, originating in the USA or CanadaThe wood shall be accompanied by an official statement that it originates in an area or areas known to be free from Ceratocystis virescens (Davidson) Moreau and is intended for the production of veneer sheets
11.

Wood of Quercus L., other than in the form of:

  • chips, particles, sawdust, shavings, wood waste or scrap; or

  • casks, barrels, vats, tubs or other coopers' products or parts thereof, of wood (including staves) where there is documented evidence that the wood has been produced or manufactured using heat treatment to achieve a minimum temperature of 176°C for 20 minutes,

but including wood which has not kept its natural round surface, originating in the USA

The wood shall be accompanied by an official statement that it:

(a)

is squared so as to remove entirely the rounded surface;

(b)

is bark-free and the water content is less than 20% expressed as a percentage of the dry matter;

(c)

is bark-free and has been disinfected by an appropriate hot-air or hot water treatment; or

(d)

in the case of sawn wood with or without residual bark attached, has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognized mark, put on the wood or on any wrapping in accordance with current usage

12.Wood of Platanus L., except that in the form of chips, particles, sawdust, shavings, wood waste or scrap, but including wood which has not kept its natural round surface, originating in the USA or ArmeniaThe wood shall be accompanied by an official statement that it has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognized mark, put on the wood or on any wrapping in accordance with current usage
13.Wood of Populus L., except that in the form of chips, particles, sawdust, shavings, wood waste or scrap, but including wood which has not kept its natural round surface, originating in any country of the American continent

The wood shall be accompanied by an official statement that it:

(a)

is bark-free; or

(b)

has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time / temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognized mark, put on the wood or on any wrapping in accordance with current usage

14.

Wood in the form of chips, particles, sawdust, shavings, wood waste or scrap, obtained in whole or in part from:

  • Acer saccharum Marsh., originating in the USA or Canada,

  • Platanus L., originating in the USA or Armenia, or

  • Populus L., originating in any country of the American continent

The wood shall be accompanied by an official statement that it:

(a)

has been produced from debarked round wood;

(b)

has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter achieved though an appropriate time/temperature schedule; or

(c)

has undergone an appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes, the latter to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export

15.Wood in the form of chips, particles, sawdust, shavings, wood waste or scrap, obtained in whole or in part from Quercus L. originating in the USA

The wood is accompanied by an official statement that it:

(a)

has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter achieved through an appropriate time/temperature schedule; or

(b)

has undergone an appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes, the latter to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export

16.Isolated bark of conifers (Coniferales), originating in any country outside EuropeThe isolated bark shall be accompanied by an official statement that it has undergone an appropriate heat treatment to achieve the minimum temperature of 56°C for at least 30 minutes, the latter to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export
17.

Dunnage, including that which has not kept its natural round, surface, other than in the form of:

  • raw wood of 6mm thickness or less; or

  • wood that has undergone a manufacturing process involving glue, heat or pressure or a combination thereof;

consigned directly from any third country except Switzerland

The dunnage:

(a)

shall—

(i)

be subject to one of the approved measures specified in Annex I to ISPM No. 15; and

(ii)

display a mark which shall contain as specified in Annex II to ISPM No. 15 at least:

(aa)

the two letter ISO country code;

(bb)

the code identifying the producer; and

(cc)

the code identifying the approved measure in to which the dunnage has been subject in accordance with paragraph (i); or

(b)

shall until 31st December 2007, be made from bark-free wood that is free from pests and signs of live pests

18.Trees, other than fruit or seeds, of conifers (Coniferales), originating in any country outside EuropeWithout prejudice to the requirements in items 19 to 21 and 31, the trees shall be accompanied by an official statement that they have been produced in nurseries and that the place of production is free from Pissodes spp. (non-European)
19.Trees, other than fruit or seeds, of conifers (Coniferales), over 3 metres in height, originating in any country outside EuropeWithout prejudice to the requirements in items 18, 20, 21 and 31, the trees shall be accompanied by an official statement that they have been produced in nurseries and that the place of production is free from Scolytidae spp. (non- European)
20.Trees, other than seeds, of Pinus L., intended for planting, originating in any third countryWithout prejudice to the requirements in items 18, 19, 21 and 31, the trees shall be accompanied by an official statement that no symptoms of Scirrhia acicola (Dearn.) Siggers or Scirrhia pini Funk and Parker have been observed at the place of production or in its immediate vicinity since the beginning of the last complete cycle of vegetation
21.Trees, other than seeds, of Abies Mill., Larix Mill., Picea A Dietr., Pinus L., Pseudotsuga Carr. or Tsuga Carr., intended for planting, originating in any third countryWithout prejudice to the requirements in items 18 to 20 and 31, the trees shall be accompanied by an official statement that no symptoms of Melampsora medusae Thümen have been observed at the place of production or in its immediate vicinity since the beginning of the last complete cycle of vegetation
22.Trees, other than fruit or seeds, of Quercus L., originating in the USAWithout prejudice to the requirements in items 23, 24, 31 and 32, the trees shall be accompanied by an official statement that they originate in an area or areas known to be free from Ceratocystis fagacearum (Bretz) Hunt
23.Trees, other than fruit or seeds, of Castanea Mill. or Quercus L., originating in any country outside EuropeWithout prejudice to the requirements in items 22, 24, 31 and 32, the trees shall be accompanied by an official statement that no symptoms of Cronartium spp. (non-European) have been observed at the place of production or in its immediate vicinity since the beginning of the last complete cycle of vegetation
24.Trees, other than seeds, of Castanea Mill. or Quercus L., intended for planting, originating in any third country

Without prejudice to the requirements in items 22, 23, 31 and 32, the trees shall be accompanied by an official statement that:

(a)

they originate in an area or areas known to be free from Cryphonectria parasitica (Murrill) Barr; or

(b)

no symptoms of Cryphonectria parasitica (Murrill) Barr have been observed at the place of production or in its immediate vicinity since the beginning of the last complete cycle of vegetation

25.Trees, other than seeds, of Platanus L., intended for planting, originating in the USA or ArmeniaWithout prejudice to the requirements in item 31, the trees shall be accompanied by an official statement that no symptoms of Ceratocystis fimbriata f. sp. platani Walter have been observed at the place of production or in its immediate vicinity since the beginning of the last complete cycle of vegetation
26.Trees, other than seeds, of Populus L., intended of planting, originating in any third countryWithout prejudice to the requirements in items 27, 31 and 32, the trees shall be accompanied by an official statement that no symptoms of Melampsora medusae Thümen have been observed at the place of production or in its immediate vicinity since the beginning of the last complete cycle of vegetation
27.Trees, other than fruit or seeds, of Populus L., originating in any country of the American continentWithout prejudice to the requirements in items 26, 31 and 32, the trees shall be accompanied by an official statement that no symptoms of Mycosphaerella populorum G E Thompson have been observed at the place of production or in its immediate vicinity since the beginning of the last complete cycle of vegetation
28.Trees, other than seeds, of Ulmus L., intended for planting, originating in any country in North AmericaWithout prejudice to the requirements in items 31 and 32, the trees shall be accompanied by an official statement that no symptoms of Elm phlöem necrosis mycoplasm have been observed at the place of production or in its immediate vicinity since the beginning of the last complete cycle of vegetation
29.Trees with roots, planted or intended for planting, grown in the open air, originating in any third countryWithout prejudice to the requirements in items 31 and 32, the trees shall be accompanied by an official statement that the place of production is known to be free from Clavibacter michiganensis ssp. sepedonicus (Spieckermann and Kotthoff) Davis et al., Globodera pallida (Stone) Behrens, Globodera rostochiensis (Wollenweber) Behrens and Synchytrium endobioticum (Schilbersky) Percival
30.

Soil or growing medium attached to or appears to have been in contact with trees, consisting in whole or in part of soil or solid organic substances such as parts of plants, humus including peat or bark or consisting in part of any solid inorganic substance, intended to sustain the vitality of the trees, originating in:

(a)

Belarus, Georgia, Moldova, Russia, Turkey or the Ukraine; or

(b)

any country outside Europe, other than Algeria, Egypt, Israel, Libya, Morocco or Tunisia

Without prejudice to the requirements in item 31, the material shall be accompanied by an official statement that:

(a)

at the time of planting it was:

(i)

free from soil and organic matter;

(ii)

found to be free from insects and harmful nematodes and subjected to appropriate examination or heat treatment or fumigation to ensure that it was free from other harmful organisms; or

(iii)

subject to appropriate heat treatment or fumigation to ensure freedom from harmful organisms; and that

(b)

since planting, either

(i)

appropriate measures have been taken to ensure that the growing material has been maintained free from harmful organisms; or

(ii)

within two weeks prior to dispatch, the trees were shaken free from the material leaving the minimum amount necessary to sustain vitality during transport, and, if replanted, the material used for that purpose meets the requirements laid down in paragraph (a)

31.Trees, other than seeds or trees in tissue culture, intended for planting, originating in any third country other than a country in the Euro-Mediterranean area

Without prejudice to the requirements in items 18 to 30 and 32, the trees shall be accompanied by an official statement that they:

(a)

are free from plant debris and from flowers and fruits;

(b)

have been grown in nurseries; and

(c)

have been inspected at appropriate times and prior to export and found to be free from symptoms of harmful bacteria, viruses and virus-like organisms, and either found to be free from signs or symptoms of harmful nematodes, insects, mites and fungi, or have been subjected to appropriate treatment to eliminate such organisms

32.Deciduous trees, other than seeds or trees in tissue culture, intended for planting, originating in any third country, other than a country in the Euro-Mediterranean areaWithout prejudice to the requirements in items 22 to 29 and 32, the trees shall be accompanied by an official statement that they are dormant and free from leaves.

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources