- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made).
Regulations 7(3)(d), 8(3)(a)(iv)
The EC declaration of conformity must contain the following particulars:
name and address of the manufacturer or of his authorised representative established within the Community,
description of the pressure equipment or assembly,
conformity assessment procedure followed,
in the case of assemblies, description of the pressure equipment constituting the assembly, and the conformity assessment procedures followed,
where appropriate, name and address of the notified body which carried out the inspection,
where appropriate, a reference to the EC type-examination certificate, EC design-exam ination certificate or EC certificate of conformity,
where appropriate, name and address of the notified body monitoring the manufacturer’s quality assurance system,
where appropriate, the references of the harmonised standards applied,
where appropriate, other technical standards and specifications used,
where appropriate, the references of the other Community Directives applied,
particulars of the signatory authorised to sign the legally binding declaration for the manufacturer or his authorised representative established within the Community.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include: