- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made).
4. The notified body must:
4.1. examine the technical documentation and identify the components which have been designed in accordance with the relevant provisions of the standards referred to in Article 5, as well as those which have been designed without applying the relevant provisions of those standards.
In particular, the notified body must:
assess the materials where these are not in conformity with the relevant harmonised standards or with a European approval for pressure equipment materials,
approve the procedures for the permanent joining of pressure equipment parts, or check that they have been previously approved in accordance with section 3.1.2 of Annex I,
verify that the personnel undertaking the permanent joining of pressure equipment parts and the non-destructive tests are qualified or approved in accordance with sections 3.1.2 and 3.1.3 of Annex I.
4.2. perform the necessary examinations to establish whether the solutions adopted by the manufacturer meet the essential requirements of the Directive where the standards referred to in Article 5 have not been applied.
4.3. perform the necessary examinations to establish whether, where the manufacturer has chosen to apply the relevant standards, these have actually been applied.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include: