- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
1. The apparatus shall be constructed in accordance with the diagram and specifications shown below and shall consist of a cone so constructed as not visibly to distort under the forces applied during the measurement. The angle included between two opposite generating lines on the surface of the cone shall be 30°. Two lines shall be marked continuously round the surface of the cone, one where the diameter of the circular section of the cone is 60 millimetres and the other where the diameter is 75 millimetres. A means (such as a spring balance) shall be attached to the cone in such a way that it can be used to give an accurate indication of an axial force of 100 Newtons.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: