- Draft legislation
This is a draft item of legislation. This draft has since been made as a UK Statutory Instrument: The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 No. 696
21. After regulation 36 insert—
36A.—(1) In this regulation—
(a)any reference to an Article or an Annex is a reference to an Article or an Annex of the ATEX Directive;
(b)“CE marking” has the meaning given to it in Article 2(26); and
(c)“harmonised standard” has the meaning given to in in Article 2(18).
(2) Subject to paragraphs (6) and (7), paragraph (3) applies where, before placing the product on the market, the manufacturer—
(a)ensures that the product has been designed and manufactured in accordance with the essential safety requirements set out in Annex II;
(b)ensures that the relevant conformity assessment procedures that apply to that product in accordance with Article 13(1) and (2) have been carried out;
(c)draws up the technical documentation referred to in Annexes III to IX;
(d)ensures that the records and correspondence relating to the conformity assessment procedures are prepared in or translated into English;
(e)affixes a CE marking and the inscriptions in accordance with Articles 15 and 16(1) to (4);
(f)draws up an EU declaration of conformity, in accordance with Article 14; and
(g)ensures that the declaration of conformity is prepared in or translated into English.
(3) Where this paragraph applies—
(a)the requirements of regulations 5, 6, 7(1), (3) and 7(6) are to be treated as being satisfied;
(b)regulations 2(a), 7(6), 8, 9(2), 17(4) 36 and 59 apply subject to the modifications in paragraph (10);
(c)Part 3 does not apply; and
(d)regulation 57 does not apply.
(4) Subject to paragraphs (6) and (7), paragraph (5) applies where, before placing a product on the market, the importer ensures that—
(a)the relevant conformity assessment procedure referred to in Article 13 has been carried out;
(b)the manufacturer has drawn up the technical documents relevant to the conformity assessment procedure followed; and
(c)the product bears the CE marking and inscriptions referred to in point 1.0.5 of Annex II.
(5) Where this paragraph applies—
(a)the requirements of regulation 19(1)(a) to (c) are to be treated as being satisfied; and
(b)regulations 2(a), 18, 23 and 27 apply subject to the modifications in paragraph (10).
(6) This paragraph applies where there is no designated standard or part of a designated standard which corresponds exactly to a harmonised standard or part of a harmonised standard referred to in Article 12.
(7) Where paragraph (6) applies, paragraphs (2)(b) and (4)(a) are to be treated as requiring the manufacturer to carry out—
(a)the conformity assessment procedure set out in Article 13(1)(b); and
(b)the relevant conformity assessment procedure that applies to that product in accordance with Article 13(2).
(8) Paragraph (9) applies where, before making a product available on the market, a distributor ensures that the product bears the CE marking and inscriptions referred to in point 1.0.5 of Annex II.
(9) Where this paragraph applies—
(a)regulation 29(1)(a)(i) is to be treated as being satisfied; and
(b)regulations 2(a), 30 and 31(1) apply subject to the modifications in paragraph (10).
(10) The modifications referred to in subparagraphs (3)(b), (5)(b) and (9)(b) are that—
(a)any reference to “declaration of conformity” is to be read as a reference to the EU declaration of conformity;
(b)any reference to “UK marking” is to be read as a reference to the CE marking;
(c)any reference to “essential safety requirements” is to be read as a reference to the essential safety requirements referred to in Annex II;
(d)any reference to “designated standard” is to be read as a reference to a harmonised standard;
(e)any reference to “relevant conformity assessment procedure” is to be read as a reference to the relevant conformity assessment procedures referred to in Article 13;
(f)any reference to “technical documentation” is a reference to the technical documentation referred to in Annexes III to IX.
36B.—(1) In this regulation any reference to an Article or Annex is a reference to an Article or an Annex of the ATEX Directive;
(2) Paragraph (3) applies where, prior to the manufacture of a product, the manufacturer ensures that the conformity assessment procedure that applies to that product in accordance with Annex III as referred to in Article 13(1)(a) and (b) has been carried out.
(3) Where this paragraph applies—
(a)any requirement to follow the Type examination set out in Part 1 of Schedule 3A in regulation 39 is to be treated as being satisfied;
(b)any reference to “relevant conformity assessment procedure” in regulations 6(a), 7(1), 19(a), 36(1)(b), 40(c) and 41(3) is to be read as including the conformity assessment procedure set out in Annex III as referred to in Article 13(1)(a) and (b); and
(c)any reference to “technical documentation” in regulations 6(b), 8, 19(b) and 27 is to be read as including the technical documentation relating to the design of the product referred to in Annex III.”.
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Draft Explanatory Memorandum sets out a brief statement of the purpose of a Draft Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Draft Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: