Search Legislation

The Renewables Obligation Order 2015

Draft Legislation:

This is a draft item of legislation. This draft has since been made as a UK Statutory Instrument: The Renewables Obligation Order 2015 No. 1947

ROCs to be issued by the Authority in respect of a generating station’s RO eligible renewable output

This section has no associated Explanatory Memorandum

28.—(1) Subject to paragraphs (3) and (5) and article 94, ROCs—

(a)are to be issued in respect of a generating station’s RO eligible renewable output in a month, and

(b)must not be issued before the end of the second month following that month.

(2) Where—

(a)electricity was generated—

(i)by a generating station with a total installed capacity of at least 1 megawatt, and

(ii)using biomass (other than animal excreta, bioliquid, landfill gas, sewage gas or waste), and

(b)the greenhouse gas emissions from the use of that biomass are above the relevant target,

ROCs in respect of that electricity must not be issued before the end of the second month following the obligation period in which the electricity was generated.

(3) For the purposes of paragraph (3), the greenhouse gas emissions from the use of biomass must be calculated in accordance with paragraphs 3 to 5 of Schedule 2.

(4) When issuing ROCs in respect of electricity generated in a month by a generating station or, in the case of ROCs certifying the matters within section 32B(5), (6) or (8) of the Act, two or more generating stations, the Authority must—

(a)determine the RO eligible renewable output of that generating station or, as the case may be, those generating stations in that month in accordance with article 29 or 30 (whichever is applicable); and

(b)issue ROCs in respect of that station’s or those stations’ RO eligible renewable output, the amount of electricity to be stated in each ROC being determined in accordance with articles 31 to 41.

(5) Where the number of megawatt hours of RO eligible renewable output in respect of which ROCs are to be issued does not equate to a whole number of ROCs, the number of megawatt hours is to be rounded to the nearest figure which does so equate (and where there are two such figures, the number of megawatt hours is to be rounded upwards).

(6) In this article, “relevant target” has the same meaning as in Part 1 of Schedule 2.

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Draft Explanatory Memorandum

Draft Explanatory Memorandum sets out a brief statement of the purpose of a Draft Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Draft Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Impact Assessments

Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:

  • Why the government is proposing to intervene;
  • The main options the government is considering, and which one is preferred;
  • How and to what extent new policies may impact on them; and,
  • The estimated costs and benefits of proposed measures.
Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources