Search Legislation

Advanced Search

The Air Quality Limit Values (Scotland) Regulations 2001

Changes to legislation:

There are outstanding changes not yet made by the legislation.gov.uk editorial team to The Air Quality Limit Values (Scotland) Regulations 2001. Those changes will be listed when you open the content using the Table of Contents below. Any changes that have already been made by the team appear in the content and are referenced with annotations. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the affected provisions when you open the content using the Table of Contents below.

View outstanding changes

Changes and effects yet to be applied to :

Changes and effects yet to be applied to the whole Instrument associated Parts and Chapters:

Whole provisions yet to be inserted into this Instrument (including any effects on those provisions):

  1. Introductory Text

  2. 1. Citation, commencement and extent

  3. 2. Definitions

  4. 3. Duty to ensure that ambient air quality is improved

  5. 4. Assessment of ambient air quality

  6. 5. Classification of zones

  7. 6. Review of classifications

  8. 7. Method of assessment of ambient air quality

  9. 8. Action plans

  10. 9. Action to be taken where limit values are exceeded

  11. 10. Zones where the levels are lower than the limit value

  12. 11. Public information

  13. 12. Revocations of Air Quality Standards Regulations 1989 and transitional provisions

  14. Signature

    1. SCHEDULE 1

      LIMIT VALUES, MARGINS OF TOLERANCE ETC.

      1. PART I SULPHUR DIOXIDE

        1. 1.1.Limit values for sulphur dioxide

        2. 1.2.Alert threshold for sulphur dioxide

        3. 1.3.Minimum Details to be made available to the public when the alert threshold for sulphur dioxide is exceeded

      2. PART II NITROGEN DIOXIDE (NO2) AND OXIDES OF NITROGEN (NOx)

        1. 2.1.Limit values for nitrogen dioxide and oxides of nitrogen

        2. 2.2.Alert threshold for nitrogen dioxide

        3. 2.3.Minimum Details to be made available to the public when the alert threshold for nitrogen dioxide is exceeded

      3. PART III PARTICULATE MATTER (PM10)

      4. PART IV LEAD

    2. SCHEDULE 2

      UPPER AND LOWER ASSESSMENT THRESHOLDS AND EXCEEDANCES

      1. PART I UPPER AND LOWER ASSESSMENT THRESHOLDS

        1. The following upper and lower assessment thresholds will apply:

        2. Averaging period Limit value Margin of tolerance Date by which...

      2. PART II DETERMINATION OF EXCEEDANCES OF UPPER AND LOWER ASSESSMENT THRESHOLDS

        1. Exceedances of upper and lower assessment thresholds must be determined...

        2. Where fewer than five years’ data are available, measurement campaigns...

    3. SCHEDULE 3

      LOCATION OF SAMPLING POINTS FOR THE MEASUREMENT OF SULPHURDIOXIDE, NITROGEN DIOXIDE AND OXIDES OF NITROGEN, PARTICULATE MATTER AND LEAD IN AMBIENT AIR.

      1. The following considerations will apply to fixed measurement.

        1. The following considerations will apply to fixed measurement.

      2. PART I MACROSCALE SITING

        1. Protection of human health (a) Sampling points directed at the...

      3. PART II MICROSCALE SITING

        1. The following guidelines should be met as far as practicable:...

        2. The following factors may also be taken into account: –...

      4. PART III DOCUMENTATION AND REVIEW OF SITE SELECTION

        1. The site-selection procedures should be fully documented at the classification...

    4. SCHEDULE 4

      CRITERIA FOR DETERMINING MINIMUM NUMBERS OF SAMPLING POINTS FOR FIXED MEASUREMENT OF CONCENTRATIONS OF RELEVANT POLLUTANTS IN AMBIENT AIR

      1. PART I MINIMUM NUMBER OF SAMPLING POINTS FOR FIXED MEASUREMENT TO ASSESS COMPLIANCE WITH LIMIT VALUES FOR THE PROTECTION OF HUMAN HEALTH AND ALERT THRESHOLDS IN ZONES AND AGGLOMERATIONS WHERE FIXED MEASUREMENT IS THE SOLE SOURCE OF INFORMATION

        1. Diffuse sources (a)   Population of agglomeration or zone (thousands)...

      2. PART II MINIMUM NUMBER OF SAMPLING POINTS FOR FIXED MEASUREMENTS TO ASSESS COMPLIANCE WITH LIMIT VALUES FOR THE PROTECTION OF ECOSYSTEMS OR VEGETATION IN ZONES OTHER THAN AGGLOMERATIONS

    5. SCHEDULE 5

      DATA-QUALITY OBJECTIVES AND COMPILATION OF RESULTS OF AIR QUALITY ASSESSMENT

      1. PART I DATA-QUALITY OBJECTIVES

        1. The following data-quality objectives for the required accuracy of assessment...

        2. The accuracy of the measurement is defined as laid down...

        3. The accuracy for modelling and objective estimation is defined as...

        4. The requirements for minimum data capture and time coverage do...

        5. The Scottish Ministers may allow for random measurements to be...

      2. PART II RESULTS OF AIR QUALITY ASSESSMENT

        1. The following information should be compiled for zones or agglomerations...

        2. Where possible maps shall be compiled showing concentration distributions within...

    6. SCHEDULE 6

      REFERENCE METHODS FOR ASSESSMENT OF CONCENTRATIONS OF SULPHUR DIOXIDE, NITROGEN DIOXIDE AND OXIDES OF NITROGEN, PARTICULATE MATTER (PM10 AND PM2.5) AND LEAD

      1. PART I REFERENCE METHOD FOR THE ANALYSIS OF SULPHUR DIOXIDE:

        1. ISO/FDIS 10498 (Standard in draft) Ambient air – determination of...

      2. PART II REFERENCE METHOD FOR THE ANALYSIS OF NITROGEN DIOXIDE AND OXIDES OF NITROGEN:

        1. ISO 7996: 1985 Ambient air – determination of the mass...

      3. PART IIIA REFERENCE METHOD FOR THE SAMPLING OF LEAD:

        1. The reference method for the sampling of lead will be...

      4. PART IIIB REFERENCE METHOD FOR THE ANALYSIS OF LEAD:

        1. ISO 9855: 1993 Ambient air – Determination of the particulate...

      5. PART IV REFERENCE METHOD FOR THE SAMPLING AND MEASUREMENT OF PM10

        1. The reference method for the sampling and measurement of PM10...

    7. SCHEDULE 7

      INFORMATION TO BE INCLUDED IN THE PLAN OR PROGRAMME FOR IMPROVEMENT OF AMBIENT AIR QUALITY

      1. 1.Localization of excess pollution

      2. 2.General information

      3. 3.Responsible authorities

      4. 4.Nature and assessment of pollution

      5. 5.Origin of pollution

      6. 6.Analysis of the situation

      7. 7.Details of those measures or projects for improvement which existed prior to 21st November 1996 i.e.

      8. 8.Details of those measures or projects adopted with a view to reducing pollution following 21st November 1996

      9. 9.Details of the measures or projects planned or being researched for the long term.

      10. 10.List of the publications, documents, work etc. used to supplement information requested in this Schedule.

  16. Explanatory Note

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources

The data on this page is available in the alternative data formats listed: