Search Legislation

The Motor Vehicles (Driver Testing and Vehicle Load) Regulations 2013

 Help about what version

What Version

  • Latest available (Revised)
  • Original (As made)
 Help about opening options

Opening Options

Status:

This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

Amendment of the Motor Vehicles (Driving Licences) Regulations 1999

This section has no associated Explanatory Memorandum

2.—(1) The Motor Vehicles (Driving Licences) Regulations 1999(1) are amended as follows.

(2) In regulation 3(2) (interpretation)—

(a)after the definitions of “Group 1 licence” and “Group 2 licence”, insert—

IBC” means an intermediate bulk container, being one single sealed container—

(a)

made of plastic or metal;

(b)

designed for the storage and transport of fluids;

(c)

with a capacity of 1,000 litres;

(d)

having its capacity clearly marked on its exterior; and

(e)

filled to capacity with water;.

(b)after the definition of “extended driving test”, insert—

“fire engine” means a category C motor vehicle that is being used—

(a)

in England or Wales, by a fire and rescue authority (as determined under section 1 of the Fire and Rescue Services Act 2004(3)); or

(b)

in Scotland, by the Scottish Fire and Rescue Service (as established under section 1A of the Fire (Scotland) Act 2005(4);.

(c)after the definition of “traffic commissioner”, insert—

“training load” means a load consisting of—

(a)

an IBC; or

(b)

training load packages that are all marked with the same nominal quantity by weight;

“training load package” means a product packaged in a transparent sealed bag so that the combination of the product and the individual bag in which it is packed is either or both of the following—

(a)

a “package” to which the Weights and Measures (Packaged Goods) Regulations 2006(5) “the 2006 Regulations” or the Weights and Measures (Packaged Goods) Regulations (Northern Ireland) 2011(6) “the 2011 Regulations” apply, and—

(i)

is marked in accordance with the requirements of regulation 5(1) of the 2006 Regulations or the 2011 Regulations as the case may be;

(ii)

is marked with its nominal quantity by weight in accordance with regulation 8 of the 2006 Regulations or the 2011 Regulations as the case may be; and

(iii)

that nominal quantity by weight so marked on the package is no less than 10kg; or

(b)

a “prepackage” to which Council Directive 76/211/EEC(7) applies, and—

(i)

is marked in accordance with points 3.1 and 3.2 of Annex I to that Directive; and

(ii)

the nominal quantity by weight so marked on the prepackage is no less than 10kg;.

(3) In regulation 37(8)(test vehicles)—

(a)in paragraphs (1) and (2), where the words “the Table” appear, substitute “Table 1”;

(b)in sub-paragraphs (a), (b), and (c) of paragraph (3), where the words “the table” appear, substitute “Table 1”;

(c)for paragraph (7), substitute—

(7) A person submitting himself for a practical test prescribed in respect of category B+E, C, C+E, D, or D+E shall provide a vehicle which is not carrying goods or burden other than either or both of the following—

(a)fixed items which are characteristic of the class to which it belongs;

(b)any load carried in accordance with paragraph (7A).;

(d)after paragraph (7), insert—

(7A) A person submitting himself for a practical test prescribed in respect of any of the categories or sub-categories shown in column 1 of Table 2 at the end of this regulation—

(a)may, during the period beginning with 15th August 2013 and ending with 14th November 2013, provide a vehicle which—

(i)is carrying a load of the nature and weight shown in column 2 of Table 2, in relation to that category or sub-category and description of vehicle; and

(ii)is loaded in such a way that the person authorised to conduct the test can visually assess the weight of the load without the load being disturbed;

(b)shall, on or after 15th November 2013, provide a vehicle which—

(i)is carrying a load of the nature and weight shown in column 2 of Table 2, in relation to that category or sub-category and description of vehicle; and

(ii)is loaded in such a way that the person authorised to conduct the test can visually assess the weight of the load without the load being disturbed.;

(e)in paragraph (12), where the words “the table” appear, substitute “Table 1”;

(f)after paragraph (12), before the table(9), for the heading “TABLE”, substitute “Table 1”; and

(g)after Table 1, as so re-named by sub-paragraph (f), insert—

Table 2

Load requirements for test vehicles

(1) Category or sub-category and description of vehicle

(2) Nature and weight of load required to be carried on the vehicle or trailer or both.

B+EA training load weighing a minimum of 600kg and a maximum of 1,000kg loaded on the trailer.

C

(a) fire engine

Water or foam carried on the fire engine so that the total laden weight of the fire engine is at least 10,000kg.

C

(b) other motor vehicles

Five IBCs loaded on the motor vehicle.

C+E

(a) articulated goods vehicle combination

Eight IBCs loaded on the combination.

C+E

(b) combination of a minimum test vehicle for category C and a trailer

Five IBCs loaded on the motor vehicle and three IBCs loaded on the trailer.
C1+EA training load weighing a minimum of 600kg and a maximum of 1,000kg loaded on the trailer.
D+EA training load weighing a minimum of 600kg and a maximum of 1,000kg loaded on the trailer.
D1+EA training load weighing a minimum of 600kg and a maximum of 1,000kg loaded on the trailer..
(1)

S.I. 1999/2864, to which there are amendments not relevant to these Regulations.

(2)

There are amendments to regulation 3 that are not relevant to these Regulations.

(3)

2004 c.21; section 1 was amended by paragraphs 10(1) and (2) of Part 1 of Schedule 2 to the Civil Contingencies Act 2004, c.36.

(4)

2005 asp 5. Section 1A was inserted by the Police and Fire Reform Act 2012 asp 8.

(5)

S.I. 2006/659. These Regulations extend to Great Britain only. See regulation 2 for definitions of “importer”, “nominal quantity”, “package” and “packer”.

(6)

S.R. (NI) 2011 No 331. These Statutory Rules extend to Northern Ireland only. See regulation 2 for definitions of “importer”, “nominal quantity”, “package” and “packer”.

(7)

OJ No L 46, 21.2.1976, p1. Council Directive 76/211/EEC of 20 January 1976 concerns the approximation of the laws of the Member States relating to the making-up by weight or volume of certain prepackaged products.

(8)

Relevant amendments to regulation 37 were made by regulation 5(1) to (3) and (5) of the Motor Vehicles (Driving Licences) (Amendment) (No. 4) Regulations 2003 (S.I. 2003/2003), by regulations 2 and 15(b) of the Motor Vehicles (Driving Licences) (Amendment) Regulations 2009 (S.I. 2009/788) and by paragraphs 1 and 20 of Schedule 3 to the Motor Vehicles (Driving Licences) (Amendment) Regulations 2012 (S.I. 2012/977).

(9)

The table was substituted by regulation 5(5) of the Motor Vehicles (Driving Licences) (Amendment) (No. 4) Regulations 2003 (S.I. 2003/2003).

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Impact Assessments

Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:

  • Why the government is proposing to intervene;
  • The main options the government is considering, and which one is preferred;
  • How and to what extent new policies may impact on them; and,
  • The estimated costs and benefits of proposed measures.
Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources