Search Legislation

Commission Regulation (EC) No 517/2008Show full title

Commission Regulation (EC) No 517/2008 of 10 June 2008 laying down detailed rules for the implementation of Council Regulation (EC) No 850/98 as regards the determination of the mesh size and assessing the thickness of twine of fishing nets

 Help about what version

What Version

Close

This is a legislation item that originated from the EU

After exit day there will be three versions of this legislation to consult for different purposes. The legislation.gov.uk version is the version that applies in the UK. The EU Version currently on EUR-lex is the version that currently applies in the EU i.e you may need this if you operate a business in the EU.

The web archive version is the official version of this legislation item as it stood on exit day before being published to legislation.gov.uk and any subsequent UK changes and effects applied. The web archive also captured associated case law and other language formats from EUR-Lex.

Changes to legislation:

There are outstanding changes not yet made to Commission Regulation (EC) No 517/2008. Those changes will be listed when you open the content using the Table of Contents below. Any changes that have already been made to the legislation appear in the content and are referenced with annotations. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the affected provisions when you open the content using the Table of Contents below.

View outstanding changes

Changes and effects yet to be applied to :

  1. Introductory Text

  2. CHAPTER I SUBJECT MATTER AND DEFINITIONS

    1. Article 1.Subject matter

    2. Article 2.Definitions

  3. CHAPTER II EC GAUGES

    1. Article 3.Mesh gauge and twine thickness gauges

    2. Article 4.Calibration instruments for the mesh gauge

    3. Article 5.Testing of the mesh gauges

  4. CHAPTER III DETERMINATION OF MESH SIZE

    1. Article 6.Selection of meshes in active gear

    2. Article 7.Selection of meshes in passive gear

    3. Article 8.General provisions on the preparation and operation of mesh gauges

    4. Article 9.Operation of the mesh gauge for measuring diamond and T90 meshes

    5. Article 10.Operation of the mesh gauge for measuring square meshes

    6. Article 11.Measurement conditions

    7. Article 12.Measurement of the size of each selected mesh

    8. Article 13.Determination of the mesh size of the net

    9. Article 14.Determination of the mesh size in case of disputes

  5. CHAPTER IV ASSESSING TWINE THICKNESS

    1. Article 15.General provisions on the selection of twines

    2. Article 16.Selection of twines in diamond mesh netting

    3. Article 17.Selection of twines in square mesh netting

    4. Article 18.Selection of the twine thickness gauge

    5. Article 19.Assessment conditions

    6. Article 20.Assessment of the thickness of each selected twine

    7. Article 21.Assessing twine thickness

    8. Article 22.Assessment of twine thickness in case of disputes

  6. CHAPTER V FINAL PROVISIONS

    1. Article 23.Repeal

    2. Article 24.Transitional provisions

    3. Article 25.Entry into force

  7. Signature

    1. ANNEX I

      Mesh size and N-direction and T-direction of netting twine

      1. Figure

    2. ANNEX II

      1. Diamond knotted netting and T90 netting

      2. Longitudinal axis of the net

    3. ANNEX III

      Technical specifications of the mesh gauge

      1. 1. The mesh gauge shall:

      2. 2. Some netting creeps under load. The gauge must respond to...

      3. Figure (These drawings are for illustrative purposes only)

      4. Appendix to Annex III

        Measurement algorithm

        1. To allow for creep in a stretched mesh:

        2. extend the movable jaw into the mesh at a constant...

    4. ANNEX IV

      Technical specifications of the twine thickness gauge

      1. Gauges for assessing the thickness of twine shall:

      2. be made of durable, non-corrosive material able to withstand a...

      3. Figure Twine-measuring pliers assembly

    5. ANNEX V

      Calibration and testing of the mesh gauge

      1. A. Verification of length measurement

      2. B. Verification of force measurement

    6. ANNEX VI

      Preparation of the mesh gauge

      1. 1. The inspector shall:

      2. 2. When the activities set out in point 1 are completed...

    7. ANNEX VII

      Operation of the mesh gauge for inspection

      1. When measuring the meshes the inspector shall:

      2. insert the jaws into the mesh opening with the fixed...

    8. ANNEX VIII

      Twines in diamond and square mesh netting

      1. Figure

    9. ANNEX IX

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.

The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.

For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources