Regulation (EU) 2019/1009 of the European Parliament and of the CouncilShow full title

2.2. The technical documentation shall specify the applicable requirements and cover, as far as relevant for the assessment, the design, manufacture and intended use of the EU fertilising product. The technical documentation shall contain, where applicable, at least the following elements: U.K.

(a)

a general description of the EU fertilising product, the PFC corresponding to the claimed function of the EU fertilising product and description of the intended use,

(b)

a list of component materials used, the CMCs as referred to in Annex II to which they belong and information about their origin or manufacturing process,

(c)

the EU declarations of conformity for the component EU fertilising products of the fertilising product blend,

(d)

drawings, schemes, descriptions and explanations necessary for the understanding of the manufacturing process of the EU fertilising product,

(e)

a specimen of the label or the leaflet, or both, referred to in Article 6(7) containing the information required in accordance with Annex III,

(f)

the names and addresses of the sites, and of the operators of the sites, at which the product and its principal components were manufactured,

(g)

a list of the harmonised standards referred to in Article 13, common specifications referred to in Article 14 and/or other relevant technical specifications applied. In the event of partly applied harmonised standards or common specifications, the technical documentation shall specify the parts which have been applied,

(h)

results of calculations made, including the calculations to demonstrate conformity with point 5 of Part II of Annex I, examinations carried out, etc.,

(i)

test reports, including the reports from product checks for oil retention and detonation resistance, referred to in point 4 and

(j)

where the EU fertilising product contains or consists of by-products within the meaning of Directive 2008/98/EC, technical and administrative evidence that the by-products comply with the criteria established by delegated acts referred to in Article 42(7) of this Regulation, and with the national measures transposing Article 5(1) of Directive 2008/98/EC and, where applicable, implementing acts referred to in Article 5(2) or national measures adopted under Article 5(3) of that Directive.