- Latest available (Revised)
- Original (As adopted by EU)
Commission Regulation (EU) 2017/460 of 16 March 2017 establishing a network code on harmonised transmission tariff structures for gas (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
There are currently no known outstanding effects by UK legislation for Commission Regulation (EU) 2017/460, Article 5.![]()
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
1.The national regulatory authority or the transmission system operator, as decided by the national regulatory authority, shall perform the following assessments and shall publish them as part of the final consultation referred to in Article 26:
(a)a cost allocation assessment relating to the transmission services revenue to be recovered by capacity-based transmission tariffs and based exclusively on the cost drivers of
technical capacity; or
forecasted contracted capacity; or
technical capacity and distance; or
forecasted contracted capacity and distance;
(b)a cost allocation assessment relating to the transmission services revenue to be recovered by commodity-based transmission tariffs, if any, and based exclusively on the cost drivers of:
the amount of gas flows; or
the amount of gas flows and distance.
2.The cost allocation assessments shall indicate the degree of cross-subsidisation between intra-system and cross-system network use based on the proposed reference price methodology.
3.The cost allocation assessment referred to in paragraph 1(a) shall be carried out as follows:
(a)the transmission services capacity revenue to be obtained from intra-system network use at both all entry points and all exit points shall be divided by the value of the relevant capacity cost driver(s) for intra-system network use in order to calculate the intra-system capacity ratio, which is defined as a monetary unit per measurement unit, such as [F1in pounds sterling] per MWh/day, in accordance with the following formula:
Where:
(a) is the revenue, defined in a monetary unit such as [F2pounds sterling], which is obtained from capacity tariffs and charged for intra-system network use;
is the value of capacity-related cost driver(s) for intra-system network use, such as the sum of the average daily forecasted capacities contracted at each intra-system entry point and intra-system exit point, or cluster of points, and is defined in a measurement unit such as MWh/day.
(b)the transmission services capacity revenue to be obtained from cross-system network use at both all entry points and all exit points shall be divided by the value of the relevant capacity cost driver(s) for cross-system network use in order to calculate the cross-system capacity ratio, which is defined as a monetary unit per measurement unit, such as [F3in pounds sterling] per MWh/day, in accordance with the following formula:
Where:
(b) is the revenue, defined in a monetary unit such as [F4pounds sterling], which is obtained from capacity tariffs and charged for cross-system network use;
is the value of capacity-related cost driver(s) for cross-system network use, such as the sum of the average daily forecasted capacities contracted at each cross-system entry and exit point, or cluster of points, and is defined in a measurement unit such as MWh/day.
(c)the capacity cost allocation comparison index between the ratios referred to in points (a) and (b), which is defined in percentage, shall be calculated in accordance with the following formula:
4.The cost allocation assessment referred to in paragraph 1(b) shall be carried out as follows:
(a)the transmission services commodity revenue to be obtained from intra-system network use at both all entry points and all exit points shall be divided by the value of the relevant commodity cost driver(s) for intra-system network use in order to calculate the intra-system commodity ratio, which is defined as a monetary unit per measurement unit, such as [F5in pounds sterling] per MWh, in accordance with the following formula:
Where:
(a) is the revenue, defined in a monetary unit such as [F6pounds sterling], which is obtained from commodity tariffs and charged for intra-system network use;
is the value of commodity-related cost driver(s) for intra-system network use, such as the sum of the average daily forecasted flows at each intra-system entry and exit point, or cluster of points, and is defined in a measurement unit such as MWh.
(b)the transmission services commodity revenue to be obtained from cross-system network use at both all entry points and all exit points shall be divided by the value of the relevant commodity cost driver(s) for cross-system network use in order to calculate the cross-system commodity ratio, which is defined as a monetary unit per measurement unit, such as [F7in pounds sterling] per MWh, in accordance with the following formula:
Where:
(b) is the revenue, defined in a monetary unit such as [F8pounds sterling], which is obtained from commodity tariffs and charged on cross-system network use;
is the value of commodity-related cost driver(s) for cross-system network use, such as the sum of the average daily forecasted flows at each cross-system entry and exit point, or cluster of points, and is defined in a measurement unit such as MWh.
(c)the commodity cost allocation comparison index between the ratios referred to in points (a) and (b), which is defined in percentage, shall be calculated in accordance with the following formula:
5.The transmission services revenue to be obtained from intra-system network use at entry points referred to in paragraphs 3(a) and 4(a) shall be calculated as follows:
(a)the amount of allocated capacity or, respectively, flows attributed to the provision of transmission services for cross-system network use at all entry points shall be deemed equal to the amount of capacity or, respectively, flows attributed to the provision of transmission services for cross-system network use at all exit points;
(b)the capacity and, respectively, flows, determined as set out in point (a) of this paragraph shall be used to calculate the transmission services revenue to be obtained from cross-system network use at entry points;
(c)the difference between the overall transmission services revenue to be obtained at entry points and the resulting value referred to in point (b) of this paragraph shall be equal to the transmission services revenue to be obtained from intra-system network use at entry points.
6.Where distance is used as a cost driver in combination with technical or forecasted contracted capacity or flows, the capacity weighted average distance or, respectively, commodity weighted average distance shall be used. Where the results of the capacity, or respectively commodity cost allocation comparison indexes referred to in paragraph 3(c) or, respectively paragraph 4(c), exceed 10 percent, the national regulatory authority shall provide the justification for such results in the decision referred to in Article 27(4).
Textual Amendments
F1Words in Art. 5(3)(a) substituted (31.12.2020) by The Gas (Security of Supply and Network Codes) (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/531), reg. 1(2), Sch. 5 para. 5(2)(a)(i); 2020 c. 1, Sch. 5 para. 1(1)
F2Words in Art. 5(3)(a) substituted (31.12.2020) by The Gas (Security of Supply and Network Codes) (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/531), reg. 1(2), Sch. 5 para. 5(2)(a)(ii); 2020 c. 1, Sch. 5 para. 1(1)
F3Words in Art. 5(3)(b) substituted (31.12.2020) by The Gas (Security of Supply and Network Codes) (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/531), reg. 1(2), Sch. 5 para. 5(2)(b)(i); 2020 c. 1, Sch. 5 para. 1(1)
F4Words in Art. 5(3)(b) substituted (31.12.2020) by The Gas (Security of Supply and Network Codes) (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/531), reg. 1(2), Sch. 5 para. 5(2)(b)(ii); 2020 c. 1, Sch. 5 para. 1(1)
F5Words in Art. 5(4)(a) substituted (31.12.2020) by The Gas (Security of Supply and Network Codes) (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/531), reg. 1(2), Sch. 5 para. 5(3)(a)(i); 2020 c. 1, Sch. 5 para. 1(1)
F6Words in Art. 5(4)(a) substituted (31.12.2020) by The Gas (Security of Supply and Network Codes) (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/531), reg. 1(2), Sch. 5 para. 5(3)(a)(ii); 2020 c. 1, Sch. 5 para. 1(1)
F7Words in Art. 5(4)(b) substituted (31.12.2020) by The Gas (Security of Supply and Network Codes) (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/531), reg. 1(2), Sch. 5 para. 5(3)(b)(i); 2020 c. 1, Sch. 5 para. 1(1)
F8Words in Art. 5(4)(b) substituted (31.12.2020) by The Gas (Security of Supply and Network Codes) (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/531), reg. 1(2), Sch. 5 para. 5(3)(b)(ii); 2020 c. 1, Sch. 5 para. 1(1)
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: