Search Legislation

Commission Regulation (EU) No 1171/2014Show full title

Commission Regulation (EU) No 1171/2014 of 31 October 2014 amending and correcting Annexes I, III, VI, IX, XI and XVII to Directive 2007/46/EC of the European Parliament and of the Council establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Text with EEA relevance)

 Help about what version

What Version

  • Latest available (Revised)
  • Original (As adopted by EU)
 Help about advanced features

Advanced Features

Close

This is a legislation item that originated from the EU

After exit day there will be three versions of this legislation to consult for different purposes. The legislation.gov.uk version is the version that applies in the UK. The EU Version currently on EUR-lex is the version that currently applies in the EU i.e you may need this if you operate a business in the EU.

The web archive version is the official version of this legislation item as it stood on exit day before being published to legislation.gov.uk and any subsequent UK changes and effects applied. The web archive also captured associated case law and other language formats from EUR-Lex.

Changes to legislation:

Commission Regulation (EU) No 1171/2014 is up to date with all changes known to be in force on or before 03 June 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.

View outstanding changes

Changes and effects yet to be applied to Annex I Paragraph 2:

(1)

Annex I is amended as follows:

(a)

the following point 0.2.2 is inserted:

0.2.2.For multi-stage approved vehicles, type-approval information of the base/previous stage vehicle (list the information for each stage. This can be done with a matrix)

Type:

Variant(s):

Version(s):

Type-approval number, including extension number

(b)

the following point 0.5.1 is inserted:

0.5.1.For multi-stage approved vehicles, company name and address of the manufacturer of the base/previous stage(s) vehicle

(2)

Annex III is amended as follows:

(a)

the following point 0.2.2 is inserted:

0.2.2.For multi-stage approved vehicles, type-approval information of the base/previous stage vehicle (list the information for each stage. This can be done with a matrix):

Type:

Variant(s):

Version(s):

Type-approval number, including extension number

(b)

the following point 0.5.1 is inserted:

0.5.1.For multi-stage approved vehicles, company name and address of the manufacturer of the base/previous stage(s) vehicle

(c)

the following points 2.17, 2.17.1 and 2.17.2 are inserted:

2.17.Vehicle submitted to multi-stage type-approval (only in the case of incomplete or completed vehicles of category N1 within the scope of Regulation (EC) No 715/2007: yes/no (1)

2.17.1.Mass of the base vehicle in running order: kg.

2.17.2.Default added mass (DAM), calculated in accordance with Section 5 of Annex XII to Regulation (EC) No 692/2008: kg.

(3)

Annex VI is amended as follows:

(a)

Model A, point 0.5 is amended as follows:

0.5.Company name and address of manufacturer of the complete/completed vehicle (1)

(b)

Model A, the following point 0.5.1 is inserted:

0.5.1.For multi-stage approved vehicles, company name and address of the manufacturer of the base/previous stage(s) vehicle

(c)

Model A, the Appendix is replaced by the following:

‘AppendixList of regulatory acts to which the type of vehicle complies(to be filled in only in the case of type-approval in accordance with Article 6(3)).

a

In accordance with Annex IV to this Directive’

SubjectaRegulatory act referenceaAs amended byApplicable to variants
1.Permissible sound level
2.Emissions
3.Fuel tanks/Rear protective devices
(4)

Annex IX is amended as follows:

(a)

Part I, Complete and completed vehicles, is amended as follows:

(i)

in ‘Model B — Side 1, Completed vehicles, EC certificate of conformity’, point 0.2.2 is replaced by the following:

0.2.2.For multi-stage approved vehicles, type-approval information of the base/previous stages vehicle (list the information for each stage):

Type:

Variant (a):

Version (a):

Type-approval number, extension number

(ii)

in ‘Model B — Side 1, Completed vehicles, EC certificate of conformity’, point 0.5.1 is replaced by the following:

0.5.1.For multi-stage approved vehicles, company name and address of the manufacturer of the base/previous stage(s) vehicle

(iii)

in ‘Side 2 — Vehicle category O3 and O4 (complete and completed vehicles)’, the following point 13.2 is inserted:

13.2.Actual mass of the vehicle: kg

(b)

Part II, Incomplete vehicles, is amended as follows:

(i)

in ‘Model C1 — Side 1, Incomplete vehicles, EC certificate of conformity’, the following point 0.2.2 is inserted:

0.2.2.For multi-stage approved vehicles, type-approval information of the base/previous stages vehicle (list the information for each stage):

Type:

Variant (a):

Version (a):

Type-approval number, extension number

(ii)

in ‘Model C1 — Side 1, Incomplete vehicles, EC certificate of conformity’, the following point 0.5.1 is inserted:

0.5.1.For multi-stage approved vehicles, company name and address of the manufacturer of the base/previous stage(s) vehicle

(iii)

in ‘Side 2 — Vehicle category M1 (incomplete vehicles)’, point 13.2 is deleted

(iv)

in ‘Side 2 — Vehicle category M1 (incomplete vehicles)’, point 14 is replaced by the following:

14.Mass in running order of the incomplete vehicle: … kg

(v)

in ‘Side 2 — Vehicle category M1 (incomplete vehicles)’, the following point 14.2 is inserted:

14.2.Actual mass of the vehicle of the incomplete vehicle: … kg

(vi)

in ‘Side 2 — Vehicle category M2 (incomplete vehicles)’, point 14 is replaced by the following:

14.Mass in running order of the incomplete vehicle: … kg

(vii)

in ‘Side 2 — Vehicle category M2 (incomplete vehicles)’, the following point 14.2 is inserted:

14.2.Actual mass of the incomplete vehicle: … kg

(viii)

in ‘Side 2 — Vehicle category M3 (incomplete vehicles)’, point 14 is replaced by the following:

14.Mass in running order of the incomplete vehicle: … kg

(ix)

in ‘Side 2 — Vehicle category M3 (incomplete vehicles)’, the following point 14.2 is inserted:

14.2.Actual mass of the incomplete vehicle: … kg

(x)

in ‘Side 2 — Vehicle category N1 (incomplete vehicles)’, point 13 is deleted

(xi)

in ‘Side 2 — Vehicle category N1 (incomplete vehicles)’, point 14 is replaced by the following:

14.Mass in running order of the incomplete vehicle: … kg

(xii)

in ‘Side 2 — Vehicle category N1 (incomplete vehicles)’, the following point 14.2 is inserted:

14.2.Actual mass of the incomplete vehicle: … kg

(xiii)

in ‘Side 2 — Vehicle category N2 (incomplete vehicles)’, point 14 is replaced by the following:

14.Mass in running order of the incomplete vehicle: … kg

(xiv)

in ‘Side 2 — Vehicle category N2 (incomplete vehicles)’, the following point 14.2 is inserted:

14.2.Actual mass of the incomplete vehicle: … kg

(xv)

in ‘Side 2 — Vehicle category N3 (incomplete vehicles)’, point 14 is replaced by the following:

14.Mass in running order of the incomplete vehicle: … kg

(xvi)

in ‘Side 2 — Vehicle category N3 (incomplete vehicles)’, the following point 14.2 is inserted:

14.2.Actual mass of the incomplete vehicle: … kg

(xvii)

in ‘Side 2 — Vehicle category O1 and O2 (incomplete vehicles)’, point 14 is replaced by the following:

14.Mass in running order of the incomplete vehicle: … kg

(xviii)

in ‘Side 2 — Vehicle category O1 and O2 (incomplete vehicles)’, the following point 14.2 is inserted:

14.2.Actual mass of the incomplete vehicle: … kg

(xix)

in ‘Side 2 — Vehicle category O3 and O4 (incomplete vehicles)’, point 14 is replaced by the following:

14.Mass in running order of the incomplete vehicle: … kg

(xx)

in ‘Side 2 — Vehicle category O3 and O4 (incomplete vehicles)’, the following point 14.2 is inserted:

14.2.Actual mass of the incomplete vehicle: … kg

(xxi)

in the explanatory notes relating to Annex IX, footnote e is replaced by the following:

(e)Entries 4 and 4.1 shall be completed in accordance with definitions 25 (Wheelbase) and 26 (Axle spacing) of Regulation (EU) No 1230/2012 respectively

(5)

Annex XI is amended as follows:

(a)

In appendix 1, entry 38A is amended as follows:

38AHead restraints (headrests), whether or not incorporated in vehicle seats

Regulation (EC) No 661/2009

UNECE Regulation No 25

DG+D
(b)

In appendix 4, entry 38A shall be deleted.

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.

The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.

For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources