Search Legislation

Commission Regulation (EU) No 407/2011Show full title

Commission Regulation (EU) No 407/2011 of 27 April 2011 amending Regulation (EC) No 661/2009 of the European Parliament and of the Council as regards the inclusion of certain Regulations of the United Nations Economic Commission for Europe on the type-approval of motor vehicles, their trailers and systems, components and separate technical units intended therefor (Text with EEA relevance)

 Help about what version

What Version

 Help about advanced features

Advanced Features

 Help about UK-EU Regulation

Legislation originating from the EU

When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.

Close

This item of legislation originated from the EU

Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).

Changes to legislation:

This version of this Regulation was derived from EUR-Lex on IP completion day (31 December 2020 11:00 p.m.). It has not been amended by the UK since then. Find out more about legislation originating from the EU as published on legislation.gov.uk Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.

Commission Regulation (EU) No 407/2011

of 27 April 2011

amending Regulation (EC) No 661/2009 of the European Parliament and of the Council as regards the inclusion of certain Regulations of the United Nations Economic Commission for Europe on the type-approval of motor vehicles, their trailers and systems, components and separate technical units intended therefor

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EC) No 661/2009 of the European Parliament and of the Council of 13 July 2009 concerning type-approval requirements for the general safety of motor vehicles, their trailers and systems, components and separate technical units intended therefor(1), and in particular Article 14(1) thereof,

Whereas:

(1) By Council Decision 97/836/EC(2) the Union has acceded to the Agreement of the United Nations Economic Commission for Europe concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted to and/or be used on wheeled vehicles and the conditions for reciprocal recognition of approvals granted on the basis of these prescriptions (Revised 1958 Agreement).

(2) By Decision 97/836/EC, the Union has also acceded to UNECE Regulations Nos 1, 3, 4, 6, 7, 8, 10, 11, 12, 13, 14, 16, 17, 18, 19, 20, 21, 23, 25, 26, 28, 31, 34, 37, 38, 39, 43, 44, 46, 48, 58, 66, 73, 77, 79, 80, 87, 89, 90, 91, 93, 97, 98, 99, 100, and 102.

(3) By Council Decision of 28 February 2000, the Union has acceded to UNECE Regulation No 110 on specific components of motor vehicles using compressed natural gas (CNG) in their propulsion system and on vehicles with regard to the installation of specific components of an approved type for the use of compressed natural gas (CNG) in their propulsion system.

(4) By Council Decision 2000/710/EC(3), the Union has acceded to UNECE Regulation No 67 on the approval of special equipment for motor vehicles fuelled by liquefied petroleum gas.

(5) By Council Decision of 7 November 2000, the Union has acceded to UNECE No Regulation 112 on uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with filament lamps and/or light-emitting diode (LED) modules.

(6) By Council Decision 2001/395/EC(4), the Union has acceded to UNECE Regulation No 13 H on the component approval of passenger cars in respect of their braking.

(7) By Council Decision 2001/505/EC(5), the Union has acceded to UNECE Regulation No 105 on the approval of vehicles intended for the carriage of dangerous goods with regard to their specific constructional features.

(8) By Council Decision of 29 April 2004, the Union has acceded to UNECE Regulation No 116 on uniform prescriptions concerning the protection of motor vehicles against unauthorised use and to UNECE Regulation No 118 on uniform technical prescriptions concerning the burning behaviour of materials used in the interior construction of certain categories of motor vehicles.

(9) By Council Decision of 14 March 2005, the Union has acceded to UNECE Regulation No 121 on uniform provisions concerning the approval of vehicles with regard to the location and identification of hand controls, tell-tales and indicators and to UNECE Regulation No 122 on uniform technical prescriptions concerning the approval of vehicles of categories M, N and O with regards to their heating systems.

(10) By Council Decision 2005/614/EC(6), the Union has acceded to UNECE Regulation No 94 on provisions concerning the approval of vehicles with regard to the protection of the occupants in the event of a frontal collision and to UNECE Regulation No 95 on provisions concerning the approval of vehicles with regard to the protection of the occupants in the event of a lateral collision.

(11) By Council Decision 2006/364/EC(7), the Union has approved UNECE Regulation No 123 concerning the approval of adaptive front-lighting systems (AFS) for motor vehicles.

(12) By Council Decision 2006/444/EC(8), the Union has acceded to UNECE Regulation No 55 on provisions concerning the approval of mechanical coupling components of combinations of vehicles.

(13) By Council Decision 2006/874/EC(9), the Union has acceded to UNECE Regulation No 107 on uniform provisions concerning the approval of categories M2 or M3 vehicles with regard to their general construction.

(14) By Council Decision 2007/159/EC(10), the Union has approved UNECE Regulation No 125 concerning the approval of motor vehicles with regard to the forward field of vision of the motor vehicle driver.

(15) By Council Decision 2009/433/EC(11), the Union has acceded to UNECE Regulation No 61 on uniform provisions for the approval of commercial vehicles with regard to their external projections forward of the cab’s rear panel.

(16) In accordance with Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive)(12), vehicles manufacturers seeking approval for their systems, components, or separate technical units have the choice of meeting the requirements of either the relevant Directives or the corresponding UNECE Regulations. Most of the requirements under Directives on vehicle parts are taken over from the corresponding UNECE Regulations. As technology progresses, UNECE Regulations are constantly amended and the relevant Directives have to be regularly updated to keep them in line with the content of the respective UNECE Regulations. In order to avoid this duplication, the CARS 21 High Level Group recommended the replacement of several Directives by the corresponding UNECE Regulations.

(17) The possibility to apply UNECE Regulations for the purpose of EC vehicle type-approval on a compulsory basis and to replace Union legislation by those UNECE Regulations is provided for in Directive 2007/46/EC. According to Regulation (EC) No 661/2009 type-approval in accordance with UNECE Regulations which apply on a compulsory basis is to be considered as EC type-approval in accordance with that Regulation and its implementing measures.

(18) Replacing Union legislation by UNECE Regulations helps to avoid duplication not only of technical requirements but also of certification and administrative procedures. In addition, type-approval that is directly based on internationally agreed standards should improve market access in third countries, in particular in those which are contracting parties to the Revised 1958 Agreement, thus enhancing Union industry’s competitiveness.

(19) Therefore, Regulation (EC) No 661/2009 provides for the repeal of several Directives concerning the type-approval of motor vehicles, their trailers and systems, components and separate technical units intended therefore, which, for the purposes of EC type-approval in accordance with that Regulation should be replaced by corresponding UNECE Regulations.

(20) For that reason, it is appropriate to include UNECE Regulations Nos 1, 3, 4, 6, 7, 8, 10, 11, 12, 13, 13 H, 14, 16, 17, 18, 19, 20, 21, 23, 25, 26, 28, 31, 34, 37, 38, 39, 43, 44, 46, 48, 55, 58, 61, 66, 67, 73, 77, 79, 80, 87, 89, 90, 91, 93, 94, 95, 97, 98, 99, 100, 102, 105, 107, 110, 112, 116, 118, 121, 122, 123 and 125 into Annex IV to Regulation (EC) No 661/2009, which lists the UNECE Regulations that apply on a compulsory basis.

(21) Regulation (EC) No 661/2009 should therefore be amended accordingly.

(22) The UNECE Regulations listed in the Annex to this Regulation should apply following the implementation dates set out in Article 13 of Regulation (EC) No 661/2009.

(23) The measures provided for in this Regulation are in accordance with the opinion of the Technical Committee — Motor Vehicles,

HAS ADOPTED THIS REGULATION:

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.

The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.

For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources