- Latest available (Revised)
- Point in Time (31/01/2020)
- Original (As adopted by EU)
Commission Regulation (EU) No 284/2011 of 22 March 2011 laying down specific conditions and detailed procedures for the import of polyamide and melamine plastic kitchenware originating in or consigned from the People’s Republic of China and Hong Kong Special Administrative Region, China
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Version Superseded: 31/12/2020
Point in time view as at 31/01/2020.
There are currently no known outstanding effects by UK legislation for Commission Regulation (EU) No 284/2011.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
This Regulation lays down specific conditions and detailed procedures for the import of polyamide and of melamine plastic kitchenware originating in or consigned from the People’s Republic of China (hereinafter ‘China’) and Hong Kong Special Administrative Region of the People’s Republic of China (hereinafter ‘Hong Kong’).
For the purpose of this Regulation the following definitions shall apply:
‘plastic kitchenware’ means plastic materials as described in paragraphs 1 and 2 of Article 1 of Directive 2002/72/EC and falling within CN code ex 3924 10 00;
‘consignment’ means a quantity of polyamide or melamine plastic kitchenware, covered by the same document(s), conveyed by the same means of transport and coming from the same third country;
‘competent authorities’ means the competent authorities of the Member States designated in accordance with Article 4 of Regulation (EC) No 882/2004;
‘first point of introduction’ means the point of entry of a consignment into the Union;
‘documentary check’ means the checking of the documents referred to in Article 3 of this Regulation;
‘identity check’ means a visual inspection to ensure that the documents accompanying the consignment tally with the contents of the consignment;
‘physical check’ means the sampling for analysis and laboratory testing and any other check necessary to verify compliance with the requirements concerning the release of PAA and formaldehyde laid down in Directive 2002/72/EC.
1.Polyamide and melamine plastic kitchenware originating in or consigned from China and Hong Kong shall be imported into the Member States only if the importer submits to the competent authority for each consignment a declaration, duly completed, confirming that it meets the requirements concerning the release of primary aromatic amines and formaldehyde laid down in Part A of Annex V and in Section A of Annex II to Directive 2002/72/EC respectively.
2.A model of the declaration referred to in paragraph 1 is set out in the Annex to this Regulation. The declaration shall be drawn up in the official language, or in one of the official languages, of the Member State in which the consignment is imported.
3.The declaration referred to in paragraph 1 shall be accompanied by a laboratory report providing:
(a)as regards polyamide kitchenware, analytical results demonstrating that they do not release into foods or food simulants primary aromatic amines in a detectable quantity. The detection limit applies to the sum of primary aromatic amines. For the purpose of the analysis the detection limit for primary aromatic amines is set at 0,01 mg/kg food or food simulants;
(b)as regards melamine kitchenware, analytical results demonstrating that they do not release into foods or food simulants formaldehyde in a quantity exceeding 15 mg/kg food.
4.The competent authority shall indicate in the declaration set out in the Annex to this Regulation, whether the goods are acceptable or not for release into free circulation, depending on whether they fulfil the terms and conditions provided for in Directive 2002/72/EC as set out in paragraph 1.
Importers or their representatives shall notify the competent authority at the first point of introduction at least two working days in advance of the estimated date and time of physical arrival of consignments originating in or consigned from China and Hong Kong.
Where the Member States decide to designate specific first points of introduction for consignments originating in or consigned from China and Hong Kong, they shall publish on the Internet an up-to-date list of these points and communicate the Internet address to the Commission.
The Commission shall display on its website; for information purposes, the links to the national lists of specific first points of introduction.
1.The competent authority at the first point of introduction shall carry out:
(a)documentary checks on all consignments within two working days from the time of their arrival;
(b)identity and physical checks, including laboratory analysis of 10 % of consignments, and in such a way that it is not possible for the importers or their representatives to predict whether any particular consignment will be subjected to such checks; the results of physical checks must be available as soon as technically possible.
2.If the laboratory analysis referred to in point (b) of paragraph 1 identifies non-compliance, the competent authorities shall immediately inform the Commission of the results through the Rapid Alert System for Food and Feed established by Article 50 of Regulation (EC) No 178/2002.
The competent authority at the first point of introduction may authorise the onward transportation of the consignments originating in or consigned from China and Hong Kong, pending the results of the checks referred to in point (b) of Article 6(1).
If the competent authority grants the authorisation referred to in the first paragraph, it shall notify the competent authority at the point of destination and shall supply a copy of the declaration set out in the Annex, duly completed as provided in Article 3 and the results of the checks referred to in point (b) of Article 6(1), as soon as the latter are available.
The Member States shall ensure that appropriate arrangements are put in place to ensure that the consignments remain under the continuous control of the competent authorities and cannot be tampered with in any way pending the results of the checks mentioned in point (b) of Article 6(1).
The release for free circulation of polyamide and melamine plastic kitchenware originating in or consigned from China and Hong Kong is subject to the presentation to the customs authorities of the declaration set out in the Annex duly completed as provided for in Article 3.
1.When checks referred to in Article 6(1) are performed, the competent authorities shall keep records of the following information:
(a)details of each consignment checked, including:
the size in terms of number of articles;
the country of origin;
(b)the number of consignments subject to sampling and analysis;
(c)the results of the controls referred to in Article 6.
2.Member States shall submit to the Commission a report including the information referred to in paragraph 1, quarterly by the end of the month following each quarter.
This Regulation shall enter into force on the 20th day following its publication in the Official Journal of the European Union.
This Regulation shall apply from 1 July 2011.
This Regulation shall be binding in its entirety and directly applicable in all Member States in accordance with the Treaties.
Done at Brussels, 22 March 2011.
For the Commission
The President
José Manuel Barroso
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: