- Latest available (Revised)
- Point in Time (01/01/2007)
- Original (As adopted by EU)
Council Directive of 1 March 1971 on the approximation of the laws of the Member States relating to the rear-view mirrors of motor vehicles (71/127/EEC) (repealed)
You are here:
What Version
Advanced Features
- Show Geographical Extent(e.g. England, Wales, Scotland and Northern Ireland)
- Show Timeline of Changes
More Resources
Revised version PDFs
- Revised 01/01/20070.38 MB
- Revised 01/05/20040.49 MB
- Revised 01/01/19951.76 MB
- Revised 19/05/19880.48 MB
- Revised 29/06/19870.48 MB
- Revised 10/11/19860.48 MB
- Revised 01/01/19860.48 MB
- Revised 21/03/19850.48 MB
- Revised 01/01/19810.32 MB
- Revised 30/07/19790.32 MB
- Revised 01/01/19730.16 MB
- Revised 04/03/19710.24 MB
This is a Directive originating from the EU
This is a legislation item that originated from the EU
After exit day there will be three versions of this legislation to consult for different purposes. The legislation.gov.uk version is the version that applies in the UK. The EU Version currently on EUR-lex is the version that currently applies in the EU i.e you may need this if you operate a business in the EU.
The web archive version is the official version of this legislation item as it stood on exit day before being published to legislation.gov.uk and any subsequent UK changes and effects applied. The web archive also captured associated case law and other language formats from EUR-Lex.
Changes over time for: Division 2.2.
Version Superseded: 25/01/2010
Alternative versions:
Status:
EU Directives are being published on this site to aid cross referencing from UK legislation. After IP completion day (31 December 2020 11pm) no further amendments will be applied to this version.
[F12.2. Main exterior rear-view mirrors (Classes II and III) U.K.
2.2.1. The dimensions of the reflecting surface must be such that it is possible to inscribe therein: U.K.
a rectangle 4 cm high the base length of which, measured in centimetres, has the value ‘ a ’ ;
a segment which is parallel to the height of the rectangle and the length of which, expressed in centimetres, has the value ‘ b ’ .
2.2.2. The minimum values of ‘ a ’ and ‘ b ’ are given in the table below: U.K.
| Class of rear-view mirror | Categories of vehicles for which the rear-view mirrors are designed | a | b |
|---|---|---|---|
| II | M 2 , M 3 , N 2 and N 3 |  | 20 |
| III | [F2M 1 , N 1 and N 2] N 3 (if the requirements of item 2.1.3 of Annex III are applicable) |  | 7] |
Textual Amendments
Options/Help
Print Options
PrintThe Whole Directive
PrintThe Whole Annex
PrintThe Whole Division
PrintThis Division only
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
See additional information alongside the content
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Opening Options
Different options to open legislation in order to view more content on screen at once
More Resources
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the EU Official Journal
- lists of changes made by and/or affecting this legislation item
- all formats of all associated documents
- correction slips
- links to related legislation and further information resources
Timeline of Changes
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
More Resources
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the print copy
- correction slips
Click 'View More' or select 'More Resources' tab for additional information including:
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- links to related legislation and further information resources
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.