The Chemicals (Hazard Information and Packaging for Supply) Regulations (Northern Ireland) 2009

PART II PARTICULAR PROVISIONS CONCERNING CERTAIN PREPARATIONS

A SPECIAL PROVISIONS FOR DANGEROUS PREPARATIONS

Dangerous preparations to be supplied to the general public

1.—(1) The label on the packaging of dangerous preparations intended to be supplied to the general public shall in addition to the relevant safety advice bear the relevant safety phrase S1, S2, S45 or S46 in accordance with the approved classification and labelling guide.

(2) When the dangerous preparations referred to in sub-paragraph (1) are classified as very toxic, toxic or corrosive and where it is physically impossible to give the information on the package itself, packages containing such preparations shall be accompanied by precise and easily understandable instructions for use including, where appropriate, instructions for the destruction of the empty package.

Dangerous preparations intended for use by spraying

2.  The label on the packaging containing dangerous preparations intended to be used for spraying shall bear the safety phrase S23 and safety phrase S38 or S51 assigned in accordance with the approved classification and labelling guide.

Dangerous preparations containing a substance affected by the risk phrase R33 (danger of cumulative effects)

3.  When a dangerous preparation contains at least one substance required to show the risk phrase R33, that phrase shall be shown on the label on the packaging of the dangerous preparation when the concentration of that substance is equal to or higher than 1% unless a different value is shown for that substance in Table 3.2 of part 3 of Annex VI of the CLP Regulation.

Dangerous preparations containing a substance affected by the risk phrase R64 (may cause harm to breast-fed babies)

4.  When a dangerous preparation contains at least one substance required to show the risk phrase R64, that phrase shall be shown on the label on the packaging of the dangerous preparation when the concentration of that substance is equal to or higher than 1% unless a different value is shown for that substance in Table 3.2 of part 3 of Annex VI of the CLP Regulation.

B SPECIAL PROVISIONS APPLYING TO ANY PREPARATION

Paints and varnishes containing lead

1.—(1) The label on the packaging of paints and varnishes containing lead in quantities exceeding 0.15% (expressed as weight of lead out of the total weight of the preparation and determined in accordance with ISO Standard 6503/1984) shall bear the following inscription—

• “Contains lead. Should not be used on surfaces that are liable to be chewed or sucked by children.”.

(2) In the case of packages containing less than 125 millilitres of the preparations referred to in sub-paragraph (1), the inscription on the label may be—

• “Warning! Contains lead.”.

Cyanoacrylate based adhesives

2.—(1) The label on the immediate packaging of glues based on cyanoacrylates shall bear the following inscription—

• “Cyanoacrylate.

• Danger.

• Bonds skin and eyes in seconds.

• Keep out of the reach of children.”.

(2) Appropriate safety advice shall accompany the package.

Preparations containing isocyanates

3.  The label on the packaging of preparations containing isocyanates (whether as monomers, oligomers, prepolymers etc. or as preparations thereof) shall bear the following inscription—

• “Contains isocyanates.

• See information supplied by the manufacturer.”.

Certain preparations containing epoxy constituents

4.  The label on the packaging of preparations containing epoxy constituents with an average molecular weight ≤ 700 shall bear the following inscription—

• “Contains epoxy constituents.

• See information supplied by the manufacturer.”.

Preparations intended to be sold to the general public that contain active chlorine

5.  The label on the packaging of preparations containing more than 1% of active chlorine which are intended to be sold to the general public shall bear the following inscription—

• “Warning! Do not use together with other products. May release dangerous gases (chlorine).”.

Preparations containing cadmium (alloys) intended to be used for brazing or soldering

6.  The label on the packaging of preparations containing cadmium (alloys) intended to be used for brazing or soldering shall bear the following inscription—

• “Warning! Contains cadmium.

• Dangerous fumes are formed during use.

• See information supplied by the manufacturer.

• Comply with the safety instructions.”.

Preparations not classified as sensitising but containing at least one sensitising substance

7.  The label on the packaging of preparations containing at least one substance classified as sensitising and being present in a concentration ≥ 0.1% or in a concentration greater than or equal to that specified under a specific note for the substance in Table 3.2 of part 3 of Annex VI of the CLP Regulation shall bear the inscription—

• “Contains (name of sensitising substance). May produce an allergic reaction.”.

Liquid preparations containing halogenated hydrocarbons

8.  For liquid preparations which show no flashpoint or a flashpoint higher than 55°C and contain a halogenated hydrocarbon and more than 5% flammable or highly flammable substances, the label on the packaging shall bear the following inscription as appropriate—

• “Can become highly flammable in use.” or

• “Can become flammable in use.”.

Preparations containing a substance assigned the risk phrase R67

9.  When a preparation contains one or more substances assigned the risk phrase R67, the label on the packaging of the preparation shall bear the following inscription—

• “Vapours may cause drowsiness and dizziness.”,

• when the total concentration of such substances present in the preparation is ≥ 15%, unless:

  • the preparation is already classified with phrases R20, R23, R26, R68/20, R39/23 or R39/26, or

  • the preparation is in a package not exceeding 125 ml.

Cement and cement preparations

10.—(1) The label on the packaging of any cement or cement preparation which would contain, when hydrated, more than 0.0002% soluble chromium (VI) of the total dry weight of the cement but for the use of reducing agents shall be marked with information on the packing date, and on the storage conditions and the storage period appropriate to maintaining the activity of the reducing agent and to preventing the content of soluble chromium (VI) from exceeding 0.0002% of the total dry weight of the cement, unless it is supplied or used for controlled, closed and totally automated processes in which cement and cement-containing preparations are handled solely by machines and in which there is no possibility of contact with the skin.

(2) The label on the packaging of any cement or cement preparation containing more than 0.0002% soluble chromium (VI) of the total dry weight of the cement shall bear the inscription:

• “Contains chromium (VI). May produce an allergic reaction.”,

• unless the preparation is already classified and labelled as a sensitiser with risk phrase R43.

C SPECIAL PROVISIONS APPLYING TO CERTAIN OTHER PREPARATIONS

Preparations not intended for the general public

1.  The label on the packaging of a preparation of the type specified in Article 31(3) of REACH shall bear the following inscription—

• “Safety data sheet available for professional user on request.”.