6A,10599/90A,061788-89-4,Acids, fatty, unsaturated (C 18 ), dimers, distilled,QMA(T) = 0.05 mg/6 dm 2 ( 27 ),
6B,10599/91,061788-89-4,Acids, fatty, unsaturated (C 18 ), dimers, non distilled,QMA(T) = 0.05 mg/6 dm 2 ( 27 ),
6C,10599/92A,068783-41-5,Acids, fatty, unsaturated (C 18 ), dimers, hydrogenated, distilled,QMA(T) = 0.05 mg/6 dm 2 ( 27 ),
6D,10599/93,068783-41-5,Acids, fatty, unsaturated (C 18 ), dimers, hydrogenated, non distilled,QMA(T) = 0.05 mg/6 dm 2 ( 27 ),
37A,13323,000102-40-9,1,3-Bis(2-hydroxyethoxy) benzene,SML = 0.05 mg/ kg,
68MA,14800,003724-65-0,Crotonic acid,QMA(T) = 0.05 mg/6 dm 2 ( 33 ),
87A,16210,006864-37-5,3,3'-Dimethyl-4,4'-diaminodicyclohexylmethane,SML = 0.05 mg/ kg ( 32 ). To be used only in polyamides.,
89A,16540,000102-09-0,Diphenyl carbonate,SML = 0.05 mg/ kg,
101A,17110,016219-75-3,5-Ethylidenebicyclo [2,2,1]hept-2-ene,QMA = 0.05 mg/6 dm 2 . The ratio surface / quantity of food shall be lower than 2 dm 2 / kg,
118MA,18700,000629-11-8,1,6-Hexanediol,SML = 0.05 mg/ kg,
120ZA,18896,001679-51-2,4-(Hydroxymethyl)-1-cyclohexene,SML = 0.05 mg/ kg,
135BM,20440,000097-90-5,Methacrylic acid, diester with ethyleneglycol,SML = 0.05 mg/ kg,
142A,21400,054276-35-6,Methacrylic acid, sulphopropyl ester,QMA = 0.05 mg/6 dm 2,
156XA,22775,000144-62-7,Oxalic acid,SML(T) = 6 mg/ kg ( 29 ),
161A,23070,000102-39-6,(1,3-Phenylenedioxy) diacetic acid,QMA = 0.05 mg/6 dm 2,


15A,11530,00999-61-1,Acrylic acid, 2-hydroxypropyl ester,QMA = mg/6 dm 2 for the sum of acrylic acid, 2-hydroxypropyl ester and acrylic acid, 2-hydroxyisopropyl ester and in compliance with the specifications laid down in Schedule 2B,
39,13480,000080-05-7,2,2-Bis (4-hydroxyphenyl) propane,SML(T) = 0.6 mg/ kg ( 28 ),
70,14950,003173-53-3,Cyclohexyl isocyanate,QMT(T) = 1 mg/ kg in FP (expressed as NCO) ( 26 ),
120B,18898,000103-90-2,N-(4-Hydroxyphenyl) acetamide,SML = 0.05 mg/ kg,
147,22150,000691-37-2,4-Methyl-1-pentene,SML = 0.05 mg/ kg,
147A,22331,025513-64-8,Mixture of (35-45% w/w) 1,6-diamino-2,2, 4-trimethylhexane and (55—65% w/w) 1,6-diamino-2,4,4-trimethylhexane,QMA = 5 mg/6 dm 2,
147B,22332,—,Mixture of (40% w/w) 2,2, 4-trimethylhexane-1,6-diisocyanate and (60% w/w) 2,4,4-trimethylhexane-1,6-diisocyanate,QM(T) — 1 mg/ kg (expressed as NCO) ( 26 ),
188,24190,065997-05-9,Rosin Wood,,


18A,34850,143925-92-2,Amines, bis(hydrogenated tallow alkyl) oxidised, QM = For use only:     in polyolefines at 0.1% (w/w) but not in LDPE when it is in contact with foods for which the Directive 85/572/ EEC establishes a reduction factor less than 3;      in PET at 0.25% (w/w) in contact with foods other of those for which the simulant D is laid down in Directive 85/572/ EEC    ,
18B,34895,000088-68-6,2-Aminobenzamide,SML = 0.05 mg/kg. To be used only for PET for water and beverages,
37AA,39680,000080-05-7,2,2-Bis(4-hydroxyphenyl) propane,SML(T) = 0.6 mg/ kg ( 28 ),
51A,42880,008001-79-4,Castor oil,,
61A,45600,003724-65-0,Crotonic acid,QMA(T) = 0.05 mg/6 dm 2 ( 33 ),
61B,45640,005232-99-5,2-Cyano-3,3-diphenylacrylic acid, ethyl ester,SML = 0.05 mg/ kg,
69A,46700,—,15,7-di-tert-Butyl-3-(3,4- and 2,3-di-methylphenyl)-3H-benzofuran-2-one containing: 3(a)5,7-di-tert-butyl-3-(3,4-dimethylphenyl)-3H-benzofuran-2-one (80-100% w/w); and 3(b)5,7-di-tert-butyl-3-(2,3-dimethylphenyl)-3H-benzofuran-2-one (0-20% w/w),SML = 5 mg/ kg,
69B,46720,004130-42-1,2,6-Di-tert-butyl-4-ethylphenol,QMA = 4.8 mg/6 dm 2,
109A,56535,—,Glycerol, esters with nonanoic acid,,
131A,59280,000100-97-0,Hexamethylenetetramine,SML(T) = 15 mg/ kg ( 21 ) (expressed as Formaldehyde),
178A,68078,027253-31-2,Neodecanoic acid, cobalt salt,SML(T) = 0.05 mg/ kg (expressed as Neodecanoic acid) and SML(T) = 0.05 mg/ kg ( 13 ) (expressed as Cobalt). Not for use in polymers contacting foods for which simulant D is laid down in Directive 85/572/ EEC,
182A,69920,000144-62-7,Oxalic acid,SML(T) = 6 mg/ kg ( 29 ),
195D,76866,—,Polyesters of 1,2-propanediol and/or 1,3- and/or 1,4-butanediol and/or polypropyleneglycol with adipic acid, which may be end-capped with acetic acid or fatty acids C12-C18 or n-octanol and / or n-decanol,SML = 30 mg/ kg,
240ZA,85601,—,Silicates, natural (with the exception of asbestos),,
280B,95000,028931-67-1,Trimethylolpropane trimethacrylatemethyl methacrylate copolymer,,


60A,45450,068610-51-5,p-Cresol-dicyclopentadiene-isobutylene, copolymer,SML = 5 mg/ kg,
198A,77895,068439-49-6,Polyethyleneglycol (EO = 2-6) monoalkyl (C 16 —C 18 ) ether,SML = 0.05 mg/ kg and in compliance with the specifications laid down in Schedule 2B,


4A,34650,151841-65-5,Aluminium hydroxybis [2,2'-methylenebis (4,6-di-tert-butylphenyl) phosphate],SML = 5 mg/ kg,
7A,38000,000553-54-8,Benzoic acid, lithium salt,SML(T) = 0.6 mg/ kg ( 8 ) (expressed as Lithium),
18A,40720,025013-16-5,tert-Butyl-4-hydroxyanisole (= BHA),SML = 30 mg/ kg,
27B,46640,000128-37-0,2,6-Di-tert-butyl-p-cresol (= BHT),SML = 3.0 mg/ kg,
54A,54880,000050-00-0,Formaldehyde,SML(T) = 15 mg/ kg ( 21 ),
54B,55200,001166-52-5,Gallic acid, dodecyl ester,SML(T) = 30 mg/ kg ( 34 ),
54C,55280,001034-01-1,Gallic acid, octyl ester,SML(T) = 30 mg/ kg ( 34 ),
54D,55360,000121-79-9,Gallic acid, propyl ester,SML(T) = 30 mg/ kg ( 34 ),
79A,67896,020336-96-3,Myristic acid, lithium salt,SML(T) = 0.6 mg/ kg ( 8 ) (expressed as Lithium),
83A,71935,007601-89-0,Perchloric acid, sodium salt monohydrate,SML = 0.05 mg/ kg ( 31 ),
88A,76680,068132-00-3,Polycyclopentadiene, hydrogenated,SML = 5 mg/ kg ( 1 ),
101A,86480,007631-90-5,Sodium bisulphite,SML(T) = 10 mg/ kg ( 30 ) (expressed as S02),
102A,86920,007632-00-0,Sodium nitrite,SML = 0.6 mg/ kg,
102B,86960,007757-83-7,Sodium sulphite,SML(T) = 10 mg/ kg ( 30 ) (expressed as S02),
102C,87120,007772-98-7,Sodium thiosulphate,SML(T) = 10 mg/ kg ( 30 ) (expressed as S02),
110A,94400,036443-68-2,Triethyleneglycol bis[3-(3-tert-butyl-4-hydroxy-5-methylphenyl) propionate],SML = 9 mg/ kg,

1,11530, Acrylic acid, 2-hydroxypropyl ester.    It may contain up to 25% (m/m) of acrylic acid, 2-hydroxyisopropyl ester ( CAS  No. 002918-23-2)  ,
2,16690, Divinylbenzene    It may contain up to 45% (m/m) of Ethylvinylbenzene  ,
3,18888,3-Hydroxybutanoic acid-3-hydroxypentanoic acid, copolymer,
,,Definition,The copolymers are produced by the controlled fermentation of Alcaligenes eutrophus using mixtures of glucose and propanoic acid as carbon sources. The organism used has not been genetically engineered and has been derived from a single wild-type organism Alcaligenes eutrophus strain H16 NCIMB 10422. Master stocks of the organism are stored as freeze-dried ampoules. A submaster / working stock is prepared from the master stock and stored in liquid nitrogen and used to prepare inocula for the fermenter. Fermenter samples will be examined daily both microscopically and for any changes in colonial morphology on a variety of agars at different temperatures. The copolymers are isolated from heat treatment bacteria by controlled digestion of the other cellular components, washing and drying. These copolymers are normally offered as formulated, melt formed granules containing additives such as nucleating agents, plasticisers, fillers, stabilisers and pigments which all conform to the general and individual specifications.,
,,Chemical name,Poly(3-D-hydroxybutanoate-co-3-D-hydroxypentanoate),
,,CAS number,080181-31-3,
,,Structural formula,,,CH 3,,
,,,CH3,O,CH2,O,
,,,|,||,|,||,
,,,(-O-CH-CH2-C-)m-(O-CH-CH2-C-)n,
,,,where n / (m + n) greater than 0 and less or equal to 0.25,
,,Average molecular weight,Not less than 150 000 Daltons (measured by gel permeation chromatography),
,,Assay,Not less than 98% poly(3-D-hydroxybutanoate-co-3-D-hydroxypentanoate) analysed after hydrolysis as a mixture of 3-D-hydroxybutanoic and 3-D-hydroxypentanoic acids,
,,Description,White to off-white powder after isolation,
,,Characteristics,
,,Identification tests:,
,,Solubility,Soluble in chlorinated hydrocarbons such as a chloroform or dichloromethane but practically insoluble in ethanol, aliphatic alkanes and water,
,,Restriction,QMA for crotonic acid is 0.05 mg/6 dm 2,
,,Purity,Prior to granulation the raw material copolymer powder must contain:,
,,— nitrogen,Not more than 2 500 mg/ kg of plastic,
,,— zinc,Not more than 100 mg/ kg of plastic,
,,— copper,Not more than 5 mg/ kg of plastic,
,,— lead,Not more than 2 mg/ kg of plastic,
,,— arsenic,Not more than 1 mg/ kg of plastic,
,,— chromium,Not more than 1 mg/ kg of plastic,
4,23547, Polydimethylsiloxane (MW > 6800)    Minimum viscosity 100 centistokes at 25°C  ,
5,25385, Triallylamine    40 mg/ kg hydrogel at a ratio of 1 kg food to a maximum of 1.5 grams of hydrogel.    For use only in hydrogels intended for non-direct food contact use.  ,
6,38320, 4-(2-Benzoxazolyl)-4'-(5-methyl-2-benzoxazolyl) stilbene    Not more than 0.05% w/w (quantity of substance used / quantity of the formulation)  ,
7,43680,Chlorodifluoromethane Content of chlorofluoromethane less than 1 substance,
8,47210, Dibutylthiostannoic acid polymer    Molecular unit = (C 8 H 18 S 3 Sn 2 )n (n = 1,5-2)  ,
9,76721, Polydimethylsiloxane (Mw > 6800)    Minimum viscosity 100 × 10- 6 m 2 /s (= 100 centistokes) at 25°C  ,
10,77895, Polyethyleneglycol (EO = 2—6) monoalkyl (C 16 —C 18 ) ether    The composition of this mixture is as follows:     polyethyleneglycol (EO = 2—6) monoalkyl (C 16 —C 18 ) ether (approximately 28%)      fatty alcohols (C 16 —C 18 ) (approximately 48%)      ethyleneglycol monoalkyl (C 16 —C 18 ) ether (approximately 24%)     ,
11,83595,Reaction product of di-tert-butylphosphonite with biphenyl, obtained by condensation of 2,4-di-tert-butylphenol with friedel craft reaction product of phosphorus trichloride and biphenyl,
,, Composition     4,4'-Biphenylene-bis [0,0-bis (2,4-di-tert-butylphenyl) phosphonite] ( CAS  No. 38613-77-3) (36-46% w/w (1))      4,3'-Biphenylene-bis [0,0-bis (2,4-di-tert-butylphenyl) phosphonite] ( CAS  No. 118421-00-4) (17-23% w/w)      3,3'-Biphenylene-bis [0,0-bis (2,4-di-tert-butylphenyl) phosphonite] ( CAS  No. 118421-01-5) (1-5% w/w)      4-Biphenylene-0,0-bis [0,0-bis (2,4-di-tert-butylphenyl) phosphonite] ( CAS  No. 91362-37-7) (11-19% w/w)      Tris (2,4-di-tert-butylphenyl) phosphite ( CAS  No. 31570-04-4) (9-18% w/w)      4,4'-Biphenylene-0,0-bis [0,0-bis (2,4-di-tert-butylphenyl) phosphonate-0,0-bis (2,4-di-tert-butylphenyl) phosphonite] ( CAS  No. 112949-970) (5% w/w )       Other specifications     Phosphor content of minimum 5.4% to 5.9%      Acid value of maximum 10 mg KOH per gram      Melt range of 85—110°C     ,
12,88640, Soyabean oil, epoxidized    Oxirane < 8%, iodine number < 6  ,
13,95859, Waxes, refined, derived from petroleum based or synthetic hydrocarbon feedstocks    The product has the following specifications:     Content of mineral hydrocarbons with carbon number less than 25: not more than 5% (w/w)      Viscosity not less than 11 × 10 −6 m 2 /s (= 11 centistokes) at 100°C      Average molecular weight not less than 500     ,
14,95883, White mineral oils, paraffinic, derived from petroleum hydrocarbon feedstocks    The product has the following specifications:     Content of mineral hydrocarbons with carbon number less than 25: not more than 5% (w/w)      Viscosity note less than 8.5 × 10 −6 m 2 /s (= 8.5 centistokes) at 100°C      Average molecular weight not less than 480     ,