Information to be included in transfer certificates
25. For the purposes of section 53B(5) of the 1984 Act, a transfer certificate must contain the following information—
(a)a statement describing the original work and the unfinished work(1);
(b)a statement describing all the steps the approver has taken to determine, in accordance with section 53B(2) of the 1984 Act, whether the unfinished work contravenes any provision of the building regulations, in particular listing—
(i)each inspection or laying open of the work undertaken;
(ii)each report of any inspection or laying open of work produced;
(iii)any other assessment of the work which was considered;
(c)a statement setting out the name and address of the registered building inspector from whom advice was obtained under section 54B(3) of the 1984 Act before giving the transfer certificate;
(d)a declaration, signed and dated by the approver, confirming—
(i)the approver has inspected the unfinished work;
(ii)the approver has determined that, as at the date of the transfer certificate, the unfinished work does not contravene any provision of the building regulations;
(iii)each report or assessment referred to the statement under paragraph (b) has been included in the transfer report given under section 53B of the 1984 Act;
(iv)the approver has obtained advice from a registered building inspector under section 54B(3) of the 1984 Act before giving the transfer certificate, and
(v)the approver has received the agreement of the person carrying out or intending to carry out the work to submit the transfer certificate and transfer report.
See section 53(7) of the Building Act 1984 for the definition of “original work” and section 53B(9) for the definition of “unfinished work”. Subsection (7) of section 53 was substituted, and section 53B was inserted, by section 50 of the Building Safety Act 2022.