The Ecodesign for Energy-Related Products and Energy Information Regulations 2021

Technical documentation requirements

19.—(1) The technical documentation file required for the conformity assessment of the product must comply with the following.

(2) Where the information in the technical documentation for a particular model has been obtained—

(a) from a model that has the same technical characteristics relevant for the technical information to be provided but is produced by a different manufacturer;

(b) by calculation on the basis of design or extrapolation from another model of the same or a different manufacturer; or

(c) by both paragraphs (a) and (b);

the technical documentation must include the details of any such calculation and the assessment undertaken by the manufacturer to verify the accuracy of the calculation, and, where appropriate, the declaration of identity between the models of different manufacturers.

(3) The technical documentation must include a list of all equivalent models, including the model identifiers.

(4) The technical documentation must include all the information specified in Annex 6 of Commission Delegated Regulation (EU) 2019/2013 of 11 March 2019(1) supplementing Regulation (EU) 2017/1369 of the European Parliament and of the Council with regard to energy labelling of electronic displays (the labelling regulation).

(5) The information referred to in paragraph (4) must be provided in the order and format set out in Annex 6 of the labelling regulation.

Exemptions

20.—(1) Paragraphs 2 to 5 of this Schedule do not apply to—

(a) broadcast displays;

(b) professional displays;

(c) security displays;

(d) digital interactive whiteboards;

(e) digital photo frames; and

(f) digital signage displays.

(2) Paragraphs 2 to 9 of this Schedule do not apply to—

(a) status displays; and

(b) control panels.

(1)

EUR 2019/2013; relevant amending instrument is S.I. 2020/1528.