- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
3.—(1) For all refrigerating appliances other than low noise appliances, the energy consumption must be determined as follows.
(2) Testing must be carried out at ambient temperatures of 16 °C and 32 °C.
(3) The average air temperatures in each compartment must be equal to or below the target temperatures specified in Table 17 for each compartment type claimed by the manufacturer, the importer or authorised representative. Values above and below target temperatures may be used to estimate the energy consumption at the target temperature for each relevant compartment by interpolation, as appropriate.
(4) The main components of energy consumption to be determined are—
(a)a set of steady state power consumption values (Pss), expressed in Watts and rounded to one decimal place, each at a specific ambient temperature and at a set of compartment temperatures, which are not necessarily the target temperatures;
(b)the representative incremental defrost and recovery energy consumption (ΔΕd-f), expressed in watt-hours (Wh) and rounded to one decimal place, for products with one or more auto-defrost system (each with its own defrost control cycle) measured at an ambient temperature of 16 °C (ΔΕd-f16) and 32 °C (ΔΕd-f32);
(c)defrost interval (td-f), expressed in hours (h) and rounded to three decimal places, for products with one or more defrost systems (each with its own defrost control cycle) measured at an ambient temperature of 16 °C (td-f16 ) and 32 °C (td-f32 ); td-f must be determined for each system under a certain range of conditions;
(d)for each test performed the Pss and ΔΕd-f are added together to form a daily energy consumption at a certain ambient temperature (ET) as follows—
ET = 0.001 × 24 × (Pss + ΔΕd-f /td-f ),
expressed in kilowatt-hours per day (kWh/24 h), specific to the settings applied;
(e)Eaux , expressed in kilowatt-hours per year (kWh/a) and rounded to three decimal places.
(5) Each of the parameters in sub-paragraph (4) must be determined through tests.
(6) For the purposes of sub-paragraph (5)—
(a)measurement data must be averaged over a test period which is taken after the appliance has been in operation for a certain time;
(b)to improve the efficiency and accuracy of testing, the length of the test period is not fixed; it must be such that the appliance is in steady state condition during this test period;
(c)the steady state condition is validated by examining all data within this test period against a set of stability criteria determined in accordance with regulation 31.
(7) AE, expressed in kWh/a, must be rounded to two decimal places and calculated as follows—
AE = 365 × Edaily/L+ Eaux
Where—
(a)the load factor L is—
(i)0.9 for refrigerating appliances with only frozen compartments; and
(ii)1.0 for all other appliances;
(b)Edaily is rounded to three decimal places expressed in kWh/24 h, and calculated from ET at an ambient temperature of 16 °C (E16) and at an ambient temperature of 32 °C (E32 ) as follows—
Edaily = 0.5 × (E16 + E32)
(8) For the purposes of sub-paragraph (7) E16 and E32 are derived by interpolation of the energy test at the target temperatures set out in Table 17.
(9) For low noise refrigerating appliances, the energy consumption is determined in accordance with the preceding provisions of this paragraph except—
(a)testing must be carried out at an ambient temperature of 25 °C;
(b)Edaily, expressed in kWh/24 h and rounded to three decimal places for the calculation of the AE is E25,
where E25 is ET at an ambient temperature of 25 °C and derived by interpolation of the energy tests at the target temperatures listed in Table 17.
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: