19G.—(1) In this paragraph and paragraphs 19A to 19F—
“benchmark” means—
in relation to a sub-installation other than a process emissions sub-installation, the benchmark referred to in Article 16(2) of the Free Allocation Regulation used to determine the preliminary annual number of allowances allocated free of charge in respect of the sub-installation—
where an application is made to increase an installation’s emissions targets for scheme years in the 2021-2025 allocation period, for scheme years in that allocation period;
where an application is made to increase an installation’s emissions targets for scheme years in the 2026-2030 allocation period, for scheme years in that allocation period;
in relation to a process emissions sub-installation, 0.97;
“capacity decrease”, in relation to an installation or a sub-installation, means a decrease in installed capacity as a result of one or more physical changes relating to its technical configuration and functioning;
“capacity increase”, in relation to an installation or a sub-installation, means an increase in installed capacity as a result of one or more physical changes relating to its technical configuration and functioning;
“district heating sub-installation” has the meaning given in point (5) of Article 2(1) of the Free Allocation Regulation;
“fuel benchmark sub-installation” has the meaning given in point (6) of Article 2(1) of the Free Allocation Regulation;
“heat benchmark sub-installation” has the meaning given in point (3) of Article 2(1) of the Free Allocation Regulation;
“installed capacity” means the maximum capacity—
in the case of a product benchmark sub-installation, for producing a product;
in the case of a district heating sub-installation or a heat benchmark sub-installation, for producing measurable heat;
in the case of a fuel benchmark sub-installation, for consuming fuel;
in the case of a process emissions sub-installation, for producing the emissions referred to in point (10) of Article 2(1) of the Free Allocation Regulation;
“measurable heat” has the meaning given in point (7) of Article 2(1) of the Free Allocation Regulation;
“process emissions sub-installation” has the meaning given in point (10) of Article 2(1) of the Free Allocation Regulation;
“product benchmark sub-installation” has the meaning given in point (2) of Article 2(1) of the Free Allocation Regulation;
“reference date” must be determined in accordance with sub-paragraphs (2) to (5);
“sub-installation” means a district heating sub-installation, a fuel benchmark sub-installation, a heat benchmark sub-installation, a process emissions sub-installation or a product benchmark sub-installation.
(2) Where an application is to increase an installation’s emissions targets for scheme years in the 2021-2025 allocation period, the reference date is—
(a)where a regulated activity began to be carried out at the installation before 2018, 31st December 2018;
(b)where a regulated activity began to be carried out at the installation in 2018, 31st December 2019;
(c)where a regulated activity began to be carried out at the installation in 2019 or 2020, 31st December 2020.
(3) But if the installation’s emissions targets for scheme years in the 2021-2025 allocation period were increased following an application in respect of a previous capacity increase, the reference date is the date on which the last such capacity increase was put into operation.
(4) Where an application is to increase an installation’s emissions targets for scheme years in the 2026-2030 allocation period, the reference date is—
(a)where a regulated activity begins to be carried out at the installation before 2023, 31st December 2023;
(b)where a regulated activity begins to be carried out at the installation in 2023, 31st December 2024;
(c)where a regulated activity begins to be carried out at the installation in 2024 or 2025, 31st December 2025.
(5) But if the installation’s emissions targets for scheme years in the 2026-2030 allocation period were increased following an application in respect of a previous capacity increase, the reference date is the date on which the last such capacity increase was put into operation.
(6) For the purpose of calculating the net change in installed capacity at an installation since the reference date under paragraph 19D or the combined capacity utilisation factor under paragraph 19F, a capacity increase or a capacity decrease at a sub-installation must be expressed in the following units—
(a)if the capacity increase or capacity decrease relates to a product benchmark sub-installation, tonnes of product produced per year;
(b)if the capacity increase or capacity decrease relates to a district heating sub-installation or a heat benchmark sub-installation, terajoules of measurable heat produced per year;
(c)if the capacity increase or capacity decrease relates to a fuel benchmark sub-installation, terajoules of fuel consumed per year;
(d)if the capacity increase or capacity decrease relates to a process emissions sub-installation, tonnes of carbon dioxide equivalent emitted per year.]
Textual Amendments