SCHEDULE 24Amendment of the Pressure Equipment (Safety) Regulations 2016
Amendment to regulation 22
1
Regulation 2 (interpretation) is amended as follows.
2
In paragraph (1)—
a
omit the definition of “accreditation”;
b
omit the definition of “accreditation certificate”;
c
for the definition of “authorised representative” substitute—
“authorised representative” means—
- a
a person who—
- i
immediately before exit day was established in the United Kingdom or an EEA state and was appointed by a manufacturer by written mandate to perform specified tasks for that manufacturer, in accordance with regulation 19, as it had effect immediately before exit day; and
- ii
on or after exit day continues to be so established and appointed by the manufacturer to perform those tasks; or
- b
a person who, on or after exit day, is established in the United Kingdom and appointed in accordance with regulation 19;
d
omit the definition of “CE marking”;
e
omit the definition of “Commission”;
f
for the definition of “conformity assessment procedure” substitute—
“conformity assessment procedure” means a procedure for conformity assessment set out in Schedule 1A;
g
after the definition of “conformity assessment procedure” insert—
“declaration of conformity” means a declaration of conformity drawn up in accordance with regulation 48 (declaration of conformity);
“designated standard” has the meaning given to it in regulation 2A;
h
in the definition of “the Directive”, at the end insert “(as it has effect immediately before exit day)”;
i
omit the definition of “EU declaration of conformity”;
j
omit the definition of “European approval for materials”;
k
omit the definition of “harmonised standard”;
l
for the definition of “importer” substitute—
“importer” means a person who—
- a
is established in the United Kingdom; and
- b
places pressure equipment or an assembly from a country outside of the United Kingdom on the market;
m
in the definition of “make available on the market” for “EU” substitute “United Kingdom”;
n
omit the definition of “national accreditation body”;
o
omit the definition of “Official Journal”;
p
in the definition of “place on the market”, for “EU” substitute “United Kingdom”;
q
after the definition of “technical specification” insert—
“UK marking” means the marking in the form set out in Annex 2 of RAMS;
3
Omit paragraphs (5) and (7).