5.—(1) Commission Delegated Regulation (EU) No 626/2011 of 4 May 2011 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of air conditioners is amended as follows.
(2) In Article 3 (responsibilities of suppliers), in paragraph 1(c) for “Member States and to the Commission”, substitute “ [F1Great Britain] ”.
(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ the authorities of [F2Great Britain] ”.
(4) Omit Article 7 (revision).
(5) At the end of Article 10 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
(6) In Annex 1 (definitions applicable for the purposes of Annexes 2 to 7), for subparagraph (8) substitute—
“(8) ‘off mode’ means a condition in which the equipment is connected to a mains power source and is not providing any function other than—
(a)an indication of off mode condition; or
(b)functionalities intended only to ensure electromagnetic compatibility pursuant to the Electromagnetic Compatibility Regulations 2016;”.
(7) In Annex 3 (the label) in subparagraph (b) of—
(a)paragraph 1.1 of section 1, after “ ‘EU eco-label’”, insert “ before [F3IP completion day] ”;
(b)paragraph 2.1 of section 2, after “ ‘EU eco-label’”, insert “ before [F3IP completion day] ”;
(c)paragraph 3.1 of section 3, after “ ‘EU eco-label’”, insert “ before [F3IP completion day] ”;
(d)paragraphs 4.1, 4.3 and 4.5 of section 4, in each instance, after “ ‘EU eco-label’”, insert “ before [F3IP completion day] ”; and
(e)paragraphs 5.1, 5.3 and 5.5 of section 5, in each instance, after “ ‘EU eco-label’”, insert “ before [F3IP completion day] ”.
(8) In Annex 4 (product fiche), for paragraph 1(c) substitute “where a model has been granted a ‘European Union eco-label’ under Regulation (EC) No 66/2010 before [F3IP completion day], a copy of the eco-label may be added;”.
(9) In Annex 5 (technical documentation), in subparagraph (c), for “harmonised”, substitute “ designated ”.
(10) In Annex 7 (measurements and calculations), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.
(11) In Annex 8 (product compliance verification by market surveillance authorities)—
(a)for each instance of “Member State” or “Member States”, substitute “ [F4Great Britain] ”;
(b)omit subparagraph (7);
(c)in the fourth paragraph—
(i)for “7” substitute “ 6 ”; and
(ii)for “harmonised” substitute “ designated ”.
Textual Amendments
F1Words in Sch. 5 para. 5(2) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(v)
F2Words in Sch. 5 para. 5(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(v)
F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4
F4Words in Sch. 5 para. 5(11)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(v)
Commencement Information
I1Sch. 5 para. 5 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)