SCHEDULE 5AMENDMENTS TO COMMISSION DELEGATED REGULATIONS RELATED TO ENERGY LABELLING
Commission Delegated Regulation (EU) No 626/2011I15
1
Commission Delegated Regulation (EU) No 626/2011 of 4 May 2011 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of air conditioners is amended as follows.
2
In Article 3 (responsibilities of suppliers), in paragraph 1(c) for “Member States and to the Commission”, substitute “
F2Great Britain
”
.
3
In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “
the authorities of F3Great Britain
”
.
4
Omit Article 7 (revision).
5
At the end of Article 10 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
6
In Annex 1 (definitions applicable for the purposes of Annexes 2 to 7), for subparagraph (8) substitute—
8
‘off mode’ means a condition in which the equipment is connected to a mains power source and is not providing any function other than—
a
an indication of off mode condition; or
b
functionalities intended only to ensure electromagnetic compatibility pursuant to the Electromagnetic Compatibility Regulations 2016;
7
In Annex 3 (the label) in subparagraph (b) of—
a
paragraph 1.1 of section 1, after “ ‘EU eco-label’”, insert “
before F1IP completion day
”
;
b
paragraph 2.1 of section 2, after “ ‘EU eco-label’”, insert “
before F1IP completion day
”
;
c
paragraph 3.1 of section 3, after “ ‘EU eco-label’”, insert “
before F1IP completion day
”
;
d
paragraphs 4.1, 4.3 and 4.5 of section 4, in each instance, after “ ‘EU eco-label’”, insert “
before F1IP completion day
”
; and
e
paragraphs 5.1, 5.3 and 5.5 of section 5, in each instance, after “ ‘EU eco-label’”, insert “
before F1IP completion day
”
.
8
In Annex 4 (product fiche), for paragraph 1(c) substitute “where a model has been granted a ‘European Union eco-label’ under Regulation (EC) No 66/2010 before F1IP completion day, a copy of the eco-label may be added;”.
9
In Annex 5 (technical documentation), in subparagraph (c), for “harmonised”, substitute “
designated
”
.
10
In Annex 7 (measurements and calculations), in paragraph 1, for the words from “harmonised” to “Union”, substitute “
designated standards
”
.
11
In Annex 8 (product compliance verification by market surveillance authorities)—
a
for each instance of “Member State” or “Member States”, substitute “
F4Great Britain
”
;
b
omit subparagraph (7);
c
in the fourth paragraph—
i
for “7” substitute “
6
”
; and
ii
for “harmonised” substitute “
designated
”
.