xmlns:atom="http://www.w3.org/2005/Atom" xmlns:atom="http://www.w3.org/2005/Atom"

Regulation 7

SCHEDULE 5U.K.AMENDMENTS TO COMMISSION DELEGATED REGULATIONS RELATED TO ENERGY LABELLING

Commission Delegated Regulation (EU) No 1059/2010U.K.

1.—(1) Commission Delegated Regulation (EU) 1059/2010 of 28 September 2010 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of household dishwashers is amended as follows.

(2) In Article 3 (responsibilities of suppliers), in subparagraph (c), for “Member States and to the Commission”, substitute “ [F1Great Britain] ”.

(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F2Great Britain] ”.

(4) Omit Article 7 (revision).

(5) At the end of Article 10 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(6) In Annex 1 (label), in subparagraph (2) of section 1, after “ ‘EU Ecolabel’”, insert “ before [F3IP completion day] ”.

(7) In Annex 2 (product fiche), in paragraph 1(e), after “ ‘EU Ecolabel’”, insert “ before [F3IP completion day] ”.

(8) In Annex 3 (technical documentation), in paragraph 1(c), for “harmonised”, substitute “ designated ”.

(9) In Annex 5 (product compliance verification by market surveillance authorities)—

(a)for each instance of “Member State” or “Member States”, substitute “ [F4Great Britain] ”;

(b)omit subparagraph (7);

(c)for the third paragraph, substitute—

[F5“Great Britain] authorities must use measurement procedures which take into account the generally recognised, state-of-the-art, reliable, accurate and reproducible measurement methods, and must use the measurement and calculation methods set out in Annex 7.”;

(d)in the fourth paragraph—

(i)for “7” substitute “ 6 ”; and

(ii)for “harmonised” substitute “ designated ”.

(10) In Annex 7 (method for calculating the Energy Efficiency Index, the Drying Efficiency Index and water consumption), in the first paragraph of section 2, omit the words from “, including” to “Union”.

Textual Amendments

F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F4Words in Sch. 5 para. 1(9)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(i)

F5Words in Sch. 5 para. 1(9)(c) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(i)

Commencement Information

I1Sch. 5 para. 1 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Commission Delegated Regulation (EU) No 1060/2010U.K.

2.—(1) Commission Delegated Regulation (EU) No 1060/2010 of 28 September 2010 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of household refrigerating appliances is amended as follows.

(2) In Article 3 (responsibilities of suppliers), in subparagraph (c), for “Member States and to the Commission”, substitute “ [F6Great Britain] ”.

(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F7Great Britain] ”.

(4) Omit Article 7 (revision).

(5) At the end of Article 10 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(6) In Annex 2 (label)—

(a)in subparagraph (2) of section 1, after “ ‘EU Ecolabel’”, insert “ before [F3IP completion day] ”;

(b)in subparagraph (2) of section 2, after “ ‘EU Ecolabel’”, insert “ before [F3IP completion day] ”.

(7) In Annex 3 (product fiche), in paragraph 1(e), after “ ‘EU Ecolabel award’”, insert “ before [F3IP completion day] ”.

(8) In Annex 4 (technical documentation), in paragraph 1(c), for “harmonised”, substitute “ designated ”.

(9) In Annex 6 (measurements), in paragraph 1, omit the words from “, including” to “Union”.

(10) In Annex 7 (product compliance verification by market surveillance authorities)—

(a)for each instance of “Member State” or “Member States”, substitute “ [F8Great Britain] ”;

(b)omit subparagraph (7);

(c)in the fourth paragraph—

(i)for “7” substitute “ 6 ”; and

(ii)for “harmonised” substitute “ designated ”.

Textual Amendments

F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F8Words in Sch. 5 para. 2(10)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(ii)

Commencement Information

I2Sch. 5 para. 2 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Commission Delegated Regulation (EU) No 1061/2010U.K.

3.—(1) Commission Delegated Regulation (EU) No 1061/2010 of 28 September 2010 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of household washing machines is amended as follows.

(2) In Article 3 (responsibilities of suppliers), in subparagraph (c), for “Member States and to the Commission”, substitute “ [F9Great Britain] ”.

(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F10Great Britain] ”.

(4) Omit Article 7 (revision).

(5) At the end of Article 10 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(6) In Annex 1 (label), in subparagraph (2) of section 1, after “ ‘EU Ecolabel’”, insert “ before [F3IP completion day] ”.

(7) In Annex 2 (product fiche), in paragraph 1(e), after “ ‘EU Ecolabel award’”, insert “ before [F3IP completion day] ”.

(8) In Annex 3 (technical documentation), in paragraph 1(c), for “harmonised”, substitute “ designated ”.

(9) In Annex 5 (product compliance verification by market surveillance authorities)—

(a)for each instance of “Member State” or “Member States”, substitute “ [F11Great Britain] ”;

(b)omit subparagraph (7);

(c)for the third paragraph, substitute—

[F12“Great Britain] authorities must use measurement procedures which take into account the generally recognised, state-of-the-art, reliable, accurate and reproducible measurement methods, and must use the measurement and calculation methods set out in Annex 7.”;

(d)in the fourth paragraph—

(i)for “7” substitute “ 6 ”; and

(ii)for “harmonised” substitute “ designated ”.

Textual Amendments

F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F11Words in Sch. 5 para. 3(9)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(iii)

F12Words in Sch. 5 para. 3(9)(c) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(iii)

Commencement Information

I3Sch. 5 para. 3 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Commission Delegated Regulation (EU) No 1062/2010U.K.

4.—(1) Commission Delegated Regulation (EU) No 1062/2010 of 28 September 2010 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of televisions is amended as follows.

(2) In Article 2 (definitions), for subparagraph (7) substitute—

“(7) ‘off mode’ means a condition in which the equipment is connected to a mains power source and is not providing any function other than—

(a)an indication of off mode condition; or

(b)functionalities intended only to ensure electromagnetic compatibility pursuant to the Electromagnetic Compatibility Regulations 2016;”.

(3) In Article 3 (responsibilities of suppliers), in paragraph 1(c), for “Member States and to the Commission”, substitute “ [F13Great Britain] ”.

(4) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F14Great Britain] ”.

(5) Omit Article 7 (revision).

(6) At the end of Article 9 (entry into force), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(7) In Annex 3 (product fiche), in paragraph 1(c), after “‘EU Ecolabel”, insert “ before [F3IP completion day] ”.

(8) In Annex 4 (technical documentation), in subparagraph (c), for “harmonised”, substitute “ designated ”.

(9) In Annex 5 (label), in point 6 of subparagraph (a) of section 1, after “ ‘European Union Ecolabel’”, insert “ before [F3IP completion day] ”.

(10) In Annex 7 (measurements), in paragraph 1, omit the words from “, including” to “Union”.

(11) In Annex 8 (product compliance verification by market surveillance authorities)—

(a)for each instance of “Member State” or “Member States”, substitute “ [F15Great Britain] ”;

(b)omit subparagraph (7);

(c)in the fourth paragraph—

(i)for “7” substitute “ 6 ”; and

(ii)for “harmonised” substitute “ designated ”.

Textual Amendments

F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F15Words in Sch. 5 para. 4(11)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(iv)

Commencement Information

I4Sch. 5 para. 4 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Commission Delegated Regulation (EU) No 626/2011U.K.

5.—(1) Commission Delegated Regulation (EU) No 626/2011 of 4 May 2011 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of air conditioners is amended as follows.

(2) In Article 3 (responsibilities of suppliers), in paragraph 1(c) for “Member States and to the Commission”, substitute “ [F16Great Britain] ”.

(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ the authorities of [F17Great Britain] ”.

(4) Omit Article 7 (revision).

(5) At the end of Article 10 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(6) In Annex 1 (definitions applicable for the purposes of Annexes 2 to 7), for subparagraph (8) substitute—

“(8) ‘off mode’ means a condition in which the equipment is connected to a mains power source and is not providing any function other than—

(a)an indication of off mode condition; or

(b)functionalities intended only to ensure electromagnetic compatibility pursuant to the Electromagnetic Compatibility Regulations 2016;”.

(7) In Annex 3 (the label) in subparagraph (b) of—

(a)paragraph 1.1 of section 1, after “ ‘EU eco-label’”, insert “ before [F3IP completion day] ”;

(b)paragraph 2.1 of section 2, after “ ‘EU eco-label’”, insert “ before [F3IP completion day] ”;

(c)paragraph 3.1 of section 3, after “ ‘EU eco-label’”, insert “ before [F3IP completion day] ”;

(d)paragraphs 4.1, 4.3 and 4.5 of section 4, in each instance, after “ ‘EU eco-label’”, insert “ before [F3IP completion day] ”; and

(e)paragraphs 5.1, 5.3 and 5.5 of section 5, in each instance, after “ ‘EU eco-label’”, insert “ before [F3IP completion day] ”.

(8) In Annex 4 (product fiche), for paragraph 1(c) substitute “where a model has been granted a ‘European Union eco-label’ under Regulation (EC) No 66/2010 before [F3IP completion day], a copy of the eco-label may be added;”.

(9) In Annex 5 (technical documentation), in subparagraph (c), for “harmonised”, substitute “ designated ”.

(10) In Annex 7 (measurements and calculations), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.

(11) In Annex 8 (product compliance verification by market surveillance authorities)—

(a)for each instance of “Member State” or “Member States”, substitute “ [F18Great Britain] ”;

(b)omit subparagraph (7);

(c)in the fourth paragraph—

(i)for “7” substitute “ 6 ”; and

(ii)for “harmonised” substitute “ designated ”.

Textual Amendments

F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F18Words in Sch. 5 para. 5(11)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(v)

Commencement Information

I5Sch. 5 para. 5 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Commission Delegated Regulation (EU) No 392/2012U.K.

6.—(1) Commission Delegated Regulation (EU) No 392/2012 of 1 March 2012 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of household tumble driers is amended as follows.

(2) In Article 3 (responsibilities of suppliers), in paragraph (c), for “Member States and to the Commission”, substitute “ [F19Great Britain] ”.

(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F20Great Britain] ”.

(4) Omit Article 7 (revision).

(5) At the end of Article 10 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(6) In Annex 1 (label)—

(a)in paragraph 1.2 of section 1, after “ ‘EU Ecolabel’”, insert “ before [F3IP completion day] ”;

(b)in paragraph 2.2 of section 2, after “ ‘EU Ecolabel’”, insert “ before [F3IP completion day] ”;

(c)in paragraph 3.2 of section 3, after “ ‘EU Ecolabel’”, insert “ before [F3IP completion day] ”.

(7) In Annex 2 (product fiche), in paragraph 1(h), after “ ‘EU Ecolabel award’”, insert “ before [F3IP completion day] ”.

(8) In Annex 3 (technical documentation), in paragraph 1(c), for “harmonised”, substitute “ designated ”.

(9) In Annex 5 (product compliance verification by market surveillance authorities)—

(a)for each instance of “Member State” or “Member States”, substitute “ [F21Great Britain] ”;

(b)omit subparagraph (7);

(c)for the third paragraph, substitute—

[F22“Great Britain] authorities must use measurement procedures which take into account the generally recognised, state-of-the-art, reliable, accurate and reproducible measurement methods, and must use the measurement and calculation methods set out in Annex 7.”;

(d)in the fourth paragraph—

(i)for “7” substitute “ 6 ”; and

(ii)for “harmonised” substitute “ designated ”.

Textual Amendments

F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F21Words in Sch. 5 para. 6(9)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(vi)

F22Words in Sch. 5 para. 6(9)(c) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(vi)

Commencement Information

I6Sch. 5 para. 6 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Commission Delegated Regulation (EU) No 874/2012U.K.

7.—(1) Commission Delegated Regulation (EU) No 874/2012 of 12 July 2012 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of electrical lamps and luminaires is amended as follows.

(2) In Article 3 (responsibilities of suppliers)—

(a)[F23in paragraph 1(b)], for the words “Member States and to the Commission”, substitute “ [F24Great Britain] ”;

F25(b). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(c)in the third paragraph, after “Directive 2009/125/EC” insert “ or other ecodesign legislation ”.

F26(3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(4) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F27Great Britain] ”.

(5) Omit Article 7 (revision).

(6) At the end of Article 10 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(7) In Annex 1 (label), in the final paragraph of section 1, after “ ‘EU ecolabel’” insert “ before [F3IP completion day] ”.

(8) In Annex 3 (technical documentation)—

(a)in subparagraph (c), for “harmonised”, substitute “ designated ”;

(b)at the end of the second paragraph, insert “ or measures listed in paragraph 4 of Schedule 1 to the Ecodesign for Energy-Related Products Regulations 2010 ”.

(9) In Annex 5 (product compliance verification by market surveillance authorities)—

(a)for each instance of “Member State” or “Member States”, substitute “ [F28Great Britain] ”;

(b)in section 1—

(i)omit subparagraph (4);

(ii)for the first paragraph, substitute—

[F29“Great Britain] authorities must use measurement procedures which take into account the generally recognised, state-of-the-art, reliable, accurate and reproducible measurement methods, and must use the measurement and calculation methods set out in Annex 7.”;

(iii)in the second paragraph—

(aa)for “4” substitute “ 3 ”; and

(bb)for “harmonised” substitute “ designated ”.

Textual Amendments

F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F23Words in Sch. 5 para. 7(2)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 10(a)

F24Words in Sch. 5 para. 7(2)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(vii)

F25Sch. 5 para. 7(2)(b) omitted (31.12.2020 immediately before IP completion day) by virtue of The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 10(b)

F26Sch. 5 para. 7(3) omitted (31.12.2020 immediately before IP completion day) by virtue of The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 10(b)

F28Words in Sch. 5 para. 7(9)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(vii)

F29Words in Sch. 5 para. 7(9)(b)(ii) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(vii)

Commencement Information

I7Sch. 5 para. 7 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Prospective

Commission Delegated Regulation (EU) No 665/2013U.K.

F308.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

Commission Delegated Regulation (EU) No 811/2013U.K.

9.—(1) Commission Delegated Regulation (EU) No 811/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of space heaters, combination heaters, packages of space heater, temperature control and solar device and packages of combination heater, temperature control and solar device is amended as follows.

(2) In Article 3 (responsibilities of suppliers and timetable), in paragraphs 1(c), 2(c), 3(b), 4(b), 5(c) and 6(c), in each instance, for “Member States and to the Commission”, substitute “ [F31Great Britain] ”.

(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F32Great Britain] ”.

(4) Omit Article 7 (review).

(5) At the end of Article 8 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(6) In Annex 1 (definitions applicable for Annexes 2 to 8)—

(a)for subparagraph (11), substitute—

“(11) ‘conversion coefficient’ (CC) means a coefficient the value of which is CC = 2.5.”;

(b)for subparagraph (46), substitute—

“(46) ‘off mode’ means a condition in which the equipment is connected to a mains power source and is not providing any function other than—

(a)an indication of off mode condition; or

(b)functionalities intended only to ensure electromagnetic compatibility pursuant to the Electromagnetic Compatibility Regulations 2016;”.

(7) In Annex 3 (the labels), in subparagraph (b) of subsections 1.1.3 and 1.1.4, in both instances, after “ ‘EU Ecolabel’”, insert “ before [F3IP completion day] ”.

(8) In Annex 5 (technical documentation), in subparagraph (c) of sections 1, 2, 3, 4, 5 and 6, in each instance, for “harmonised”, substitute “ designated ”.

(9) In Annex 7 (measurements and calculations), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.

(10) In Annex 8 (product compliance verification by market surveillance authorities)—

(a)for each instance of “Member State” or “Member States”, substitute “ [F33Great Britain] ”;

(b)omit subparagraph (7);

(c)in the fourth paragraph—

(i)for “7” substitute “ 6 ”; and

(ii)for “harmonised” substitute “ designated ”.

Textual Amendments

F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F33Words in Sch. 5 para. 9(10)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(viii)

Commencement Information

I8Sch. 5 para. 9 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Commission Delegated Regulation (EU) No 812/2013U.K.

10.—(1) Commission Delegated Regulation (EU) No 812/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of water heaters, hot water storage tanks and packages of water heater and solar device is amended as follows.

(2) In Article 1 (subject matter and scope), in paragraph 2(c)—

(a)after “heaters” insert “ that immediately before [F3IP completion day] would have been ”;

(b)after “Council”, insert “ , as that Directive had effect immediately before [F3IP completion day] ”.

(3) In Article 3 (responsibilities of suppliers and timetable), in paragraphs 1(c), 2(c), 3(b) and 4(c), in each instance, for “Member States and to the Commission”, substitute “ [F34Great Britain] ”.

(4) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F35Great Britain] ”.

(5) Omit Article 7 (review).

(6) At the end of Article 8 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(7) In Annex 1 (definitions applicable for Annexes 2 to 9), for subparagraph (13), substitute—

“(13) ‘conversion coefficient’ (CC) means a coefficient the value of which is CC = 2.5.”.

(8) In Annex 3 (the labels), in subparagraph (b) of subsection 1.1.3, after “ ‘EU Ecolabel’” insert “ before [F3IP completion day] ”.

(9) In Annex 5 (technical documentation), in subparagraph (c) in sections 1 to 4, in each instance, for “harmonised” substitute “ designated ”.

(10) In Annex 7 (measurements), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.

(11) In Annex 8 (method for calculating the water heating energy efficiency of water heaters), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.

(12) In Annex 9 (product compliance verification by market surveillance authorities)—

(a)for each instance of “Member State” or “Member States”, substitute “ [F36Great Britain] ”;

(b)omit subparagraph (7);

(c)in the fourth paragraph—

(i)for “7” substitute “ 6 ”; and

(ii)for “harmonised” substitute “ designated ”.

Textual Amendments

F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F36Words in Sch. 5 para. 10(12)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(ix)

Commencement Information

I9Sch. 5 para. 10 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Commission Delegated Regulation (EU) No 65/2014U.K.

11.—(1) Commission Delegated Regulation (EU) No 65/2014 of 1 October 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of domestic ovens and range hoods is amended as follows.

(2) In Article 2 (definitions), for subparagraph (19), substitute—

“(19) ‘off mode’ means a condition in which the equipment is connected to a mains power source and is not providing any function other than—

(a)an indication of off mode condition; or

(b)functionalities intended only to ensure electromagnetic compatibility pursuant to the Electromagnetic Compatibility Regulations 2016;”.

(3) In Article 3 (responsibilities of suppliers and timetable), in subparagraphs (1)(a)(iii) and (1)(b)(iii), in both instances, for “Member States” substitute “ [F37Great Britain] ”.

(4) In Article 6 (verification procedure for market surveillance purposes), for “Member States'”, substitute “ [F38Great Britain] ”.

(5) Omit Article 7 (review).

(6) At the end of Article 10 (entry into force and application), in the final paragraph, omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(7) In Annex 2 (measurements and calculations), in the first paragraph, omit the words from “, including” to “Union”.

(8) In Annex 4 (fiche), for paragraph 2 of section A, substitute “ Where a model has been granted a European Union eco-label under Regulation (EC) No 66/2010 of the European Parliament and of the Council of 25 November 2009 before [F3IP completion day], a copy of the eco-label may be added ”.

(9) In Annex 5 (technical documentation), in paragraph 1(e) of section A and paragraph 1(e) of Section B, in both instances, for “harmonised”, substitute “ designated ”.

(10) In Annex 8 (product compliance verification by market surveillance authorities)—

(a)for each instance of “Member State” or “Member States”, substitute “ [F39Great Britain] ”;

(b)omit subparagraph (7);

(c)in the fourth paragraph—

(i)for “7” substitute “ 6 ”; and

(ii)for “harmonised” substitute “ designated ”.

Textual Amendments

F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F39Words in Sch. 5 para. 11(10)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(x)

Commencement Information

I10Sch. 5 para. 11 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Commission Delegated Regulation (EU) No 1254/2014U.K.

12.—(1) Commission Delegated Regulation (EU) No 1254/2014 of 11 July 2014 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of residential ventilation units is amended as follows.

(2) In Article 1 (subject matter and scope), in paragraph 2(b), after “Council”, insert “ , as it had effect immediately before [F3IP completion day] ”.

(3) In Article 2 (definitions), after “Regulation the” insert “ definitions in Regulation (EU) 2017/1369 of the European Parliament and of the Council of 4 July 2017 setting a framework for energy labelling and repealing Directive 2010/30/EU as well as the ”.

(4) In Article 3 (responsibilities of suppliers), in paragraph 1(c), for “Member State authorities and the Commission” substitute “ authorities of [F40Great Britain] ”.

(5) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ the authorities of [F41Great Britain] ”.

(6) Omit Article 7 (review).

(7) At the end of Article 8 (entry into force), in the second paragraph, omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(8) In Annex 5 (technical documentation), in subparagraph (c), for “harmonised” substitute “ designated ”.

(9) In Annex 9 (product compliance verification by market surveillance authorities)—

(a)for each instance of “Member State” or “Member States”, substitute “ [F42Great Britain] ”;

(b)omit subparagraph (7);

(c)in the fourth paragraph—

(i)for “7” substitute “ 6 ”; and

(ii)for “harmonised” substitute “ designated ”.

Textual Amendments

F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F42Words in Sch. 5 para. 12(9)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(xi)

Commencement Information

I11Sch. 5 para. 12 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Commission Delegated Regulation (EU) 2015/1094U.K.

13.—(1) Commission Delegated Regulation (EU) 2015/1094 of 5 May 2015 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of professional refrigerated storage cabinets is amended as follows.

(2) In Article 2 (definitions), after “The” insert “ definitions in the Energy Information Regulations 2011 as well as the ”.

(3) In Article 3 (responsibilities of suppliers and timetable), in paragraph 1(e), for “Member States” substitute “ [F43Great Britain] ”.

(4) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F44Great Britain] ”.

(5) Omit Article 7 (review).

(6) At the end of Article 8 (entry into force and application), in the second paragraph, omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(7) In Annex 3 (labels)—

(a)in the second paragraph of section 1, after “ ‘EU ecolabel’” insert “ before [F3IP completion day] ”;

(b)in the second paragraph of section 2, after “ ‘EU eco-label’” insert “ before [F3IP completion day] ”.

(8) In Annex 4 (product fiche), in paragraph 1(e), after “ ‘EU eco-label’” insert “ before [F3IP completion day] ”.

(9) In Annex 5 (technical documentation)—

(a)in paragraph 1(c), for “harmonised”, substitute “ designated ”;

(b)at the end of paragraph 3, insert “ or measures listed in paragraph 4 of Schedule 1 to the Ecodesign for Energy-Related Products Regulations 2010 ”.

(10) In Annex 9 (measurement and calculation), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.

(11) In Annex 10 (product compliance verification by market surveillance authorities)—

(a)for each instance of “Member State” or “Member States”, substitute “ [F45Great Britain] ”;

(b)omit subparagraph (7);

(c)in the fourth paragraph—

(i)for “7” substitute “ 6 ”; and

(ii)for “harmonised” substitute “ designated ”.

Textual Amendments

F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F45Words in Sch. 5 para. 13(11)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(xii)

Commencement Information

I12Sch. 5 para. 13 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Commission Delegated Regulation (EU) 2015/1186U.K.

14.—(1) Commission Delegated Regulation (EU) 2015/1186 of 24 April 2015 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of local space heaters is amended as follows.

(2) In Article 3 (responsibilities of suppliers and timetable), in paragraphs 1(e) and 2(e), in both instances, for “Member States and to the Commission”, substitute “ [F46Great Britain] ”.

(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F47Great Britain] ”.

(4) Omit Article 7 (review).

(5) At the end of Article 8 (entry into force), in the final paragraph, omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(6) In Annex 5 (technical documentation)—

(a)in paragraph (c), for “harmonised”, substitute “ designated ”;

(b)at the end of the second paragraph, insert “ or measures listed in paragraph 4 of Schedule 1 to the Ecodesign for Energy-Related Products Regulations 2010 ”.

(7) In Annex 8 (measurements and calculations), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.

(8) In Annex 9 (product compliance verification by market surveillance authorities)—

(a)for each instance of “Member State” or “Member States”, substitute “ [F48Great Britain] ”;

(b)omit subparagraph (7);

(c)in the fourth paragraph—

(i)for “7” substitute “ 6 ”; and

(ii)for “harmonised” substitute “ designated ”.

Textual Amendments

F48Words in Sch. 5 para. 14(8)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(xiii)

Commencement Information

I13Sch. 5 para. 14 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Commission Delegated Regulation (EU) 2015/1187U.K.

15.—(1) Commission Delegated Regulation (EU) 2015/1187 of 27 April 2015 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of solid fuel boilers and packages of a solid fuel boiler, supplementary heaters, temperature controls and solar devices is amended as follows.

(2) In Article 3 (responsibilities of suppliers and timetable), in paragraphs 1(e) and 3(e), in both instances, for “Member States and to the Commission”, substitute “ [F49Great Britain] ”.

(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F50Great Britain] ”.

(4) Omit Article 7 (review).

(5) At the end of Article 8 (entry into force), in the last paragraph, omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(6) In Annex 1 (definitions applicable to Annexes 2 to 10), for subparagraph (5), substitute—

“(5) ‘conversion coefficient’ (CC) means a coefficient the value of which is CC = 2.5.”.

(7) In Annex 3 (the labels), in subparagraph (b) of subsections 1.1 and 1.2, in both instances, after “ ‘EU Ecolabel’”, insert “ before [F3IP completion day] ”.

(8) In Annex 5 (technical documentation)—

(a)in subparagraph (c) of section 1 and section 2, in both instances, for “harmonised” substitute “ designated ”;

(b)at the end of the second unnumbered paragraph in section 1, after “Directive 2009/125/EC of the European Parliament and of the Council”, insert “ or measures listed in paragraph 4 of Schedule 1 to the Ecodesign for Energy-Related Products Regulations 2010 ”.

(9) In Annex 8 (measurements and calculations), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.

(10) In Annex 10 (product compliance verification by market surveillance authorities)—

(a)for each instance of “Member State” or “Member States”, substitute “ [F51Great Britain] ”;

(b)omit subparagraph (7);

(c)in the fourth paragraph—

(i)for “7” substitute “ 6 ”; and

(ii)for “harmonised” substitute “ designated ”.

Textual Amendments

F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4

F51Words in Sch. 5 para. 15(10)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(xiv)

Commencement Information

I14Sch. 5 para. 15 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)