3.—(1) Commission Regulation (EC) No 244/2009 of 18 March 2009 implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for non-directional household lamps is amended as follows.
(2) In Article 2 (definitions), at the beginning, for the words from “For the purposes” to “also apply:”, substitute—
“The definitions set out in the Ecodesign for Energy-Related Products Regulations 2010 apply; and for any term that is not defined in those Regulations, the definitions set out in Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products, as it had effect immediately before exit day, apply. The following definitions also apply—”.
(3) In Article 4 (conformity assessment)—
(a)for paragraph 1, substitute—
“1. For the purposes of regulation 4(2)(a) of the Ecodesign for Energy-Related Products Regulations 2010, the procedure for assessing whether an energy-related product complies with this implementing measure is the internal design control system set out in Part 1 of Schedule 1A to the Ecodesign for Energy-Related Products Regulations 2010 or the management system for assessing conformity set out in Part 2 of Schedule 1A to those Regulations.”;
(b)in paragraph 2, for “Article 8 of Directive 2005/32/EC” substitute “regulation 4(2)(a) of the Ecodesign for Energy-Related Products Regulations 2010”.
(4) For Article 5 (verification procedure for market surveillance purposes), substitute—
“When performing market surveillance checks to assess compliance with the requirements set out in Annex 2, the authorities of the United Kingdom must apply the verification procedure described in Annex 3.”.
(5) Omit Article 7 (revision).
(6) At the end of Article 8 (entry into force), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
(7) In Annex 1 (technical parameters covered and definitions for the purposes of Annexes 2 to 4), in the definition of “lamp mercury content” after “Commission Decision 2002/747/EC”, insert “, as it had effect immediately before exit day”.
(8) In Annex 2 (ecodesign requirements for non-directional household lamps), in paragraph 3.1(a), after “Directive 98/11/EC(1)”, insert “, as it had effect immediately before exit day”.
(9) Annex 3 (verification procedure for market surveillance purposes) is amended as follows—
(a)in the first paragraph, for “Member State”, substitute “United Kingdom”;
(b)in the fourth paragraph—
(i)for “authorities of the Member States”, substitute “United Kingdom authorities”;
(ii)in the first point, for the words from “harmonised” to “Directive 2005/32/EC”, substitute “designated standards”.
OJ L 71, 10.3.1998, p. 1.