25. This Chapter applies in relation to the making available on the market of a regulated non-automatic weighing instrument by a distributor.
26. Before making the regulated non-automatic instrument available on the market, the distributor must act with due care in relation to the requirements of these Regulations.
27.—(1) The distributor must verify that the regulated non-automatic weighing instrument bears the CE marking and the M marking.
(2) The distributor must verify that the regulated non-automatic weighing instrument, it is accompanied by instructions and information easily understood by end users.
(3) Instructions and information supplied in accordance with this regulation must be in a language that is easily understood by end users and where those users are in the United Kingdom must be in English.
(4) The distributor must verify that the manufacturer and the importer have complied with the requirements set out in regulation 9 (manufacturers’ obligations in relation to the marking of regulated non-automatic weighing instruments with serial numbers etc.), regulation 10 (manufacturers to mark contact details on regulated non-automatic weighing instruments) and regulation 18 (requirements to mark importers’ details on regulated non-automatic weighing instruments).
28.—(1) This regulation applies where a distributor considers, or has reason to believe, that a regulated non-automatic weighing instrument is not in conformity with the essential requirements.
(2) Where this regulation applies, the distributor must not make the regulated non-automatic weighing instrument available on the market until it has been brought into conformity.
(3) Where the regulated non-automatic weighing instrument presents a risk, the distributor must immediately inform—
(a)the manufacturer;
(b)the importer (where the distributor is not also the manufacturer or importer); and
(c)the market surveillance authority,
to that effect, giving details, in particular, of the non-compliance of the instrument and of the corrective measures taken by that distributor.
29. A distributor must, in respect of regulated non-automatic weighing instruments under that distributor’s responsibility, ensure that the conditions of their storage or transport are not such as to jeopardise their continuing compliance with the essential requirements.
30.—(1) This regulation applies where a distributor considers, or has reason to believe, that a regulated non-automatic weighing instrument placed on the market by that distributor is not in conformity with the requirements of these Regulations.
(2) Where this regulation applies, the distributor must immediately take the corrective measures necessary to bring the regulated non-automatic weighing instrument into conformity, or withdraw or recall it, if appropriate.
(3) Where the regulated non-automatic weighing instrument presents a risk, the distributor must immediately inform the competent authority to that effect, giving details, in particular, of the non-compliance of the instrument and of the corrective measures taken by that distributor.
31.—(1) The distributor must, further to a reasoned request from a competent authority, provide that authority with all the information and documentation in paper or electronic form necessary to demonstrate the conformity of the regulated non-automatic weighing instrument with the requirements of these Regulations.
(2) Information and documentation supplied to a competent authority pursuant to this regulation must be supplied in English.
(3) A distributor must co-operate with a competent authority, at its request, as regards any action to eliminate the risks posed by any regulated non-automatic weighing instrument that the distributor has placed on the market.