[F1Declaration ] of conformity and [F2UK] markingE+W+S
6.—(1) Where the conformity of electrical equipment with the principal elements of the safety objectives has been demonstrated by the conformity assessment procedure set out in Schedule 2, a manufacturer must, before placing that electrical equipment on the market—
(a)draw up a declaration of conformity in accordance with regulation 38 (F3... declaration of conformity); and
(b)affix the [F4UK] marking in accordance with regulation 39 ([F4UK] marking).
(2) The manufacturer must keep the F5... declaration of conformity up to date.
[F6(3) Where electrical equipment is subject to more than one enactment requiring a declaration of conformity to be drawn up, the manufacturer must draw up a single declaration of conformity which identifies each enactment by its title.]
Extent Information
E1This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F1Word in reg. 6 heading substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 23 para. 4(a)(i) (with Sch. 23 para. 30) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F2Word in reg. 6 heading substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 23 para. 4(a)(ii) (with Sch. 23 para. 30) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F3Word in reg. 6(1)(a) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 23 para. 4(b) (with Sch. 23 para. 30) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F4Word in reg. 6(1)(b) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 23 para. 4(c) (with Sch. 23 para. 30) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F5Word in reg. 6(2) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 23 para. 4(b) (with Sch. 23 para. 30) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F6Reg. 6(3) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 23 para. 4(d) (with Sch. 23 para. 30) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
EU declaration of conformity and CE markingN.I.
6.—(1) Where the conformity of electrical equipment with the principal elements of the safety objectives has been demonstrated by the conformity assessment procedure set out in Schedule 2, a manufacturer must, before placing that electrical equipment on the market—
(a)draw up a declaration of conformity in accordance with regulation 38 (EU declaration of conformity); and
(b)affix the CE marking in accordance with regulation 39 (CE marking).
(2) The manufacturer must keep the EU declaration of conformity up to date.
(3) Where electrical equipment is subject to more than one [F7NI Protocol obligation] requiring a declaration of conformity to be drawn up, the manufacturer must draw up a single declaration of conformity which—
(a)identifies the [F8relevant] EU instruments; and
(b)includes references to the publication of those EU instruments in the Official Journal.
[F9(4) In paragraph (3) “NI Protocol obligation” means any obligation created or arising by or under the Protocol on Ireland/ Northern Ireland in the EU withdrawal agreement, whether or not an obligation to which section 7A(2) of the European Union (Withdrawal) Act 2018 applies.]
Extent Information
E2This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F7Words in reg. 6(3) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 11 para. 3(1)(a)(i)
F8Word in reg. 6(3)(a) inserted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 11 para. 3(1)(a)(ii)