- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for The National Minimum Wage Regulations 2015, Section 42.![]()
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
42.—(1) In this Chapter, the “average hourly output rate” is the mean number (including any fraction) of the measure of output per hour.
(2) To determine the average hourly output rate the employer must either—
(a)conduct a test which satisfies the requirements in paragraph (3); or
(b)make an estimate of the mean speed the output work is done which satisfies the requirements in paragraph (4).
(3) The requirements are—
(a)the test is conducted on—
(i)all the employer’s workers who do the output work, or
(ii)a sample of those workers which, as respects the speed, is representative of the worker’s work as respects that measure of output;
(b)the test is conducted in similar physical conditions to those in which the worker will be doing the work; and
(c)the total output per hour during the test is divided by the number of workers tested.
(4) The requirements are—
(a)a test is conducted on a sample of the employer’s workers which is, so far as reasonably practicable, representative as respects the speed at which they work, of the speed at which the workers who produce the measure of output work;
(b)that test is carried out in relation to work which—
(i)is reasonably similar to the output work and was done in similar physical conditions to those of the worker, or
(ii)is the same as the output work but was done in different physical conditions to those of the worker; and
(c)the average speed is reasonably adjusted to take into account the likely difference in time involved in the worker doing the output work in the worker’s physical conditions in comparison to the test which was carried out.
(5) If there are changes in the number or identity of workers who do the output work, the employer is not required to conduct a further test or make a further estimate unless the employer has reason to believe that the changes materially affect the average hourly output rate.
Commencement Information
I1Reg. 42 in force at 6.4.2015, see reg. 1
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: