Note: In this Schedule, defined terms are printed in quotation marks.<Substitution ChangeId="key-fdfdb1d11ff036598f1fa218d7eb8593-1611321050719" CommentaryRef="key-fdfdb1d11ff036598f1fa218d7eb8593">Definitions</Substitution>In this Schedule:. . . “airship” means a power-driven airborne vehicle that is kept buoyant by a body of gas (usually helium, formerly hydrogen) which is lighter than air; “biocatalyst” means enzymes for specific chemical or biochemical reactions or other biological compounds which bind to and accelerate the degradation of chemical warfare (CW) agents; “biological agents” means pathogens or toxins, selected or modified (such as altering purity, shelf life, virulence, dissemination characteristics, or resistance to UV radiation) to produce casualties in humans or animals, degrade equipment or damage crops or the environment; . . . “cyber incident response” means the process of exchanging necessary information or “software” on a cybersecurity incident with individuals or organisations responsible for conducting or coordinating remediation to address the cybersecurity incident; ‘Deactivation Regulation’ means Commission Implementing Regulation (EU) 2015/2403 establishing common guidelines on deactivation standards and techniques for ensuring that deactivated firearms are rendered irreversibly inoperable; “development” means all stages prior to “production” (e.g. design, design research, design analyses, design concepts, assembly and testing of prototypes, pilot production schemes, design data, process of transforming design data into goods or “software”, configuration design, integration design, layouts); “digital computer” means equipment which can, in the form of one or more discrete variables, perform all of the following: a.accept data,b.store data or instructions in fixed or alterable (writable) storage,c.process data by means of a stored sequence of instructions which is modifiable, andd.provide output of data;Technical Note:Modifications of a stored sequence of instructions include replacement of fixed storage devices, but not a physical change in wiring or interconnections;“end-effectors” means grippers, active tooling units (i.e. devices for applying motive power, process energy or sensing to the workpiece) and any other tooling that is attached to the baseplate on the end of a “robot” manipulator arm“energetic materials” means substances or mixtures that react chemically to release energy required for their intended application; “explosives”, “pyrotechnics” and “propellants” are sub-classes of energetic materials; “equivalent standards” means comparable national or international standards recognised by one or more Wassenaar Arrangement “participating states” and applicable to the relevant entry; “explosives” means solid, liquid or gaseous substances or mixtures of substances which, in their application as primary, booster, or main charges in warheads, demolition and other applications, are required to detonate;. . .“first generation image intensifier tubes” means electrostatically focused tubes, employing input and output fibre optic or glass face plates, multi-alkali photocathodes (S-20 or S-25), but not microchannel plate amplifiers;“fuel cell” means an electrochemical device that converts chemical energy directly into Direct Current (DC) electricity by consuming fuel from an external source;“improvised explosive devices” means devices fabricated or intended to be placed in an improvised manner incorporating destructive, lethal, noxious, “pyrotechnic” or incendiary chemicals designed to destroy, disfigure or harass; they may incorporate military stores, but are normally devised from non-military components; “laser” means an item that produces spatially and temporally coherent light through amplification by stimulated emission of radiation; “library” (parametric technical database) means a collection of technical information, reference to which may enhance the performance of relevant systems, equipment or components; “lighter-than-air vehicles” means balloons and “airships” that rely on hot air or on lighter-than-air gases such as helium or hydrogen for their lift; “nuclear reactor” means the goods within or attached directly to the reactor vessel, the equipment which controls the level of power in the core, and the components which normally contain, come into direct contact with or control the primary coolant of the reactor core; “participating state” means a state participating in the Wassenaar Arrangement (see www.wassenaar.org); “production” means all production stages (e.g. product engineering, manufacture, integration, assembly (mounting), inspection, testing, quality assurance);“propellants” means substances or mixtures that react chemically to produce large volumes of hot gases at controlled rates to perform mechanical work;“ pyrotechnics ” means mixtures of solid or liquid fuels and oxidisers which, when ignited, undergo an energetic chemical reaction at a controlled rate intended to produce specific time delays, or quantities of heat, noise, smoke, visible light or infrared radiation; pyrophorics are a subclass of “pyrotechnics”, which contain no oxidisers but ignite spontaneously on contact with air;“required” as applied to “technology”, refers to only that portion of “technology” which is peculiarly responsible for achieving or exceeding the controlled performance levels, characteristics or functions. Such “required” “technology” may be shared by different goods ...;“riot control agents” means substances which under the expected conditions of use for riot control purposes, produce rapidly in humans sensory irritation or disabling physical effects which disappear within a short time following termination of exposure;Technical Note:Tear gases are a subset of “riot control agents”.“robot” means a manipulation mechanism, which may be of the continuous path or of the point-to-point variety, may use sensors, and which:a.is multifunctional;b.is capable of positioning or orienting material, parts, tools or special devices through variable movements in three dimensional space;c.incorporates three or more closed or open loop servo-devices which may include stepping motors; andd.has “user-accessible programmability” by means of the teach/playback method or by means of an electronic computer which may be a programmable logic controller, i.e. without mechanical intervention;Note:This definition does not include:a.manipulation mechanisms which are only manually/teleoperator controllable;b.fixed sequence manipulation mechanisms, which are automated moving devices, operating according to “programmes” where the motions are limited by fixed stops, such as pins or cams and the sequence of motions and the selection of paths or angles are not variable or changeable by mechanical, electronic or electrical means;c.mechanically controlled variable sequence manipulation mechanisms, which are automated moving devices, operating according to “programmes” where the motions are limited by fixed, but adjustable stops, such as pins or cams and the sequence of motions and the selection of paths or angles are variable within the fixed programme pattern; variations or modifications of the programme pattern (such as changes of pins or exchanges of cams) in one or more motion axes are accomplished only through mechanical operations;d.non-servo-controlled variable sequence manipulation mechanisms, which are automated moving devices, operating according to mechanically fixed programmed motions; the “programme” is variable but the sequence proceeds only by the binary signal from mechanically fixed electrical binary devices or adjustable stops;e.stacker cranes defined as Cartesian coordinate manipulator systems manufactured as an integral part of a vertical array of storage bins and designed to access the contents of those bins for storage or retrieval.. . . “satellite navigation system” means a system consisting of ground stations, a constellation of satellites, and receivers, that enables receiver locations to be calculated on the basis of signals received from the satellites. It includes global navigation satellite systems and regional navigation satellite systems; “Spacecraft” means a craft designed to operate in, persist in or transit through space in the form of a “satellite”, “space probe”, or “space vehicle”. Note:“Spacecraft” does not include landers, rovers, or other craft, limited by design to operate on or beneath the surface of, or in the atmosphere of an extra-terrestrial celestial body, or “sub-orbital craft”. “sub-orbital craft” means a craft having an enclosure designed for the transport of people or cargo which is designed to:a. operate above the stratosphere;b. perform a non-orbital trajectory; andc. land back on Earth with the people or cargo intact;. . .“superconductive” in relation to materials (e.g. metals, alloys or compounds) means those which can lose all electrical resistance (i.e. which can attain infinite electrical conductivity and carry very large electrical currents without Joule heating); the superconductive state of a material is individually characterised by a ‘critical temperature’, a critical magnetic field, which is a function of temperature, and a critical current density which is a function of both magnetic field and temperature;Technical Note:‘Critical temperature’ (also known as the transition temperature) of a specific “superconductive” material means the temperature at which the specific material loses all resistance to the flow of direct electrical current.“technology” means specific ‘information’ necessary for the “development”; “production” or “use” of goods or “software”;Technical Note:‘Information’ may take forms including, not limited to: blueprints, plans, diagrams, models, formulae, algorithms, tables, ‘source code’, engineering designs and specifications, manuals and instructions written or recorded on other media or devices (e.g. disk, tape, read-only memories);‘source code’ (or source language) is a convenient expression of one or more processes which may be turned by a programming system into equipment executable form.“Unmanned Aerial Vehicle” (“UAV”) means any “aircraft” capable of initiating flight and sustaining controlled flight and navigation without any human presence on board;“use” means operation, installation (e.g. on-site installation), maintenance, checking, repair, overhaul and refurbishing;“user-accessible programmability” means the facility allowing a user to insert, modify or replace “programmes” by means other than:a.A physical change in writing or interconnections; orb.The setting of function controls including entry of parameters;“vulnerability disclosure” means the process of identifying, reporting, or communicating a vulnerability to, or analysing a vulnerability with, individuals or organisations responsible for conducting or coordinating remediation for the purpose of resolving the vulnerability.
<Strong><Emphasis><Substitution ChangeId="key-fdfdb1d11ff036598f1fa218d7eb8593-1611321050719" CommentaryRef="key-fdfdb1d11ff036598f1fa218d7eb8593">Military, Security and Para-military Goods, Software and Technology and Arms, Ammunition and Related Material</Substitution></Emphasis></Strong>ML1Smooth-bore weapons with a calibre of less than 20 mm, other firearms and automatic weapons with a calibre of 12.7 mm (calibre 0.50 inches) or less and accessories, as follows, and specially designed components therefor:N.B.: Weapons using non-centre fire (e.g. rimfired) cased ammunition and which are not of the fully automatic firing type are specified in PL9010.a. or PL9011.a. of Schedule 3. Note:ML1 does not control:a.Firearms specially designed for dummy ammunition and which are incapable of discharging a projectile;b.Firearms specially designed to launch tethered projectiles, having no high explosive charge or communications link, to a range of 500 m or less;c.Firearms to which the “Deactivation Regulation” applies which have been deactivated and marked in accordance with the technical specifications set out in Annexes I and II to that Regulation;d.Firearms to which the “Deactivation Regulation” does not apply which bear a mark and are certified as having been rendered incapable of discharging any shot, bullet or other missile in accordance with section 8 of the Firearms (Amendment) Act 1988.e. Weapons using non-centre fire (e.g. rimfired) cased ammunition and which are not of the fully automatic firing type.a.Rifles and combination guns, handguns, machine, sub-machine and volley guns; N.B.: Rifles and combination guns, manufactured earlier than 1938 are specified in PL9010.a. and PL9011.a. of Schedule 3. Note: ML1.a. does not control:a.Bayonets;b. Rifles and combination guns manufactured earlier than 1938;c.Reproductions of rifles and combination guns, the originals of which were manufactured earlier than 1890;d.Handguns, volley guns and machine guns, manufactured earlier than 1890, and their reproductions;e.
Rifles or handguns, specially designed to discharge an inert projectile by compressed air or CO2 ;f. Handguns specially designed for any of the following:1. slaughtering of domestic animals; or2. tranquillising of animals.b.Smooth-bore weapons as follows:N.B.1.: Smooth-bore weapons manufactured earlier than 1938 are specified in PL9010.a. and PL9011.a. of Schedule 3.N.B.2.: Smooth-bore weapons manufactured in 1938 or later are specified in PL9010.a. and PL9011.a. of Schedule 3 provided they are not specifically designed for military use or of the fully automatic type.1.Smooth-bore weapons specially designed for military use;2. Fully automatic smooth-bore weapons not controlled by ML1.b.1.; Note:ML1.b. does not control:a. Smooth-bore weapons manufactured earlier than 1938;b.Reproductions of smooth-bore weapons, the originals of which were manufactured earlier than 1890;c.Smooth-bore weapons, specially designed for any of the following;1.Slaughtering of domestic animals;2. Tranquillising of animals;3.Seismic testing;4.Firing of industrial projectiles;d.Signal pistols;e.Industrial Tools;f.
Smooth-bore weapons that are both not specially designed for military use and specially designed to discharge an inert projectile by compressed air or CO2.c.Weapons using caseless ammunition; d.
Accessories designed for firearms specified in ML1.a., ML1.b. or ML1.c., as follows:
1. Detachable cartridge magazines;2. Sound suppressors or moderators;3. ‘Gun-mountings’;Technical Note:For the purposes of ML1.d.3., a ‘gun-mounting’ is a fixture designed to mount a gun onto a ground “vehicle”, “aircraft”, “vessel” or structure.4. Flash suppressors;5. Optical weapon-sights with electronic image processing;6. Optical weapon-sights specially designed for military use.ML2Smooth-bore weapons with a calibre of 20 mm or more, other armament or weapons with a calibre greater than 12.7 mm (calibre 0.50 inches), accessories and projectors specially designed or modified for military use, as follows, and specially designed components therefor:. . .a.Guns, howitzers, cannon, mortars, anti-tank weapons, projectile launchers, military flame throwers, rifles, recoilless rifles and smooth-bore weapons;
N.B.1.: Rifles, smooth-bore weapons and combination guns, manufactured earlier than 1938 are specified in PL9010.a. and PL9011.a. of Schedule 3.
N.B.2.: Smooth-bore weapons that are manufactured in 1938 or later are specified in PL9010.a. and PL9011.a. of Schedule 3, provided they are not specially designed for military use or not of the fully automatic firing type.
Note:
ML2.a. does not control:
a.Rifles, smooth-bore weapons and combination guns, manufactured earlier than 1938;b.Reproductions of rifles, smooth-bore weapons and combination guns, the originals of which were manufactured earlier than 1890;c.Guns, howitzers, cannons, mortars, manufactured earlier than 1890;d.Smooth-bore weapons specially designed for any of the following:1.Slaughtering of domestic animals;2. Tranquillising of animals;3.Seismic testing;4.Firing of industrial projectiles;e.Signal pistols;f.Hand-held projectile launchers, specially designed to launch tethered projectiles, having no high explosive charge or communications link, to a range of 500 m or less.g.Smooth-bore weapons that are not of the following:1.Specially designed for military use; or2.Fully Automatic firing typeb.The following types of projectors, when specially designed or modified for military use:1. Smoke canister projectors;2. Gas canister projectors;3. Pyrotechnics projectors.Note: ML2.b. does not control signal pistols.c. Accessories specially designed for the weapons specified in ML2.a., as follows: 1.Weapon sights and weapon sight mounts, specially designed for military use; 2.Signature reduction devices;3Mountings;4Detachable cartridge magazines.d.. . .ML3Ammunition and fuze setting devices, as follows, and specially designed components therefor: N.B.: Ammunition specially designed for “firearms” specified in PL9010.a. or PL9011.a. in Schedule 3 is specified in PL9010.c. or PL9011.c. in Schedule 3. a.Ammunition for weapons specified in ML1, ML2 or ML12;Note: ML3.a. does not control:a.Ammunition crimped without a projectile (blank star);b.Dummy ammunition with a pierced powder chamber;c.Other blank and dummy ammunition, not incorporating components designed for live ammunition;d.Components specially designed for blank or dummy ammunition, specified in this Note a, b or c; ore.Cartridges specially designed for signalling, bird scaring or lighting of gas flares at oil wells.b.Fuze setting devices specially designed for ammunition specified in ML3.a.ML4Bombs, torpedoes, rockets, missiles, other explosive devices and charges, and related equipment and accessories, as follows, and specially designed components therefor:N.B. 1: Electronic guidance and navigation equipment is controlled in ML11.a.N.B. 2: Aircraft missile protection systems are controlled in ML4.c.a. Bombs, torpedoes, grenades, smoke canisters, rockets, mines, missiles, depth charges, demolition-charges, demolition-devices, demolition-kits, “pyrotechnic” devices, cartridges, submunitions therefor and simulators (i.e., equipment simulating the characteristics of any of these items), specially designed for military use; N.B.: For grenade or canister ammunition for weapons or projectors specified in ML1. or ML2. and submunitions specially designed for ammunition, see ML3.b.Equipment that is both specially designed for military use and specially designed for ‘activities’ relating to any of the following:1.goods specified in ML4.a.; or2.“improvised explosive devices”;Technical Note:For the purposes of ML4.b., ‘activities’ applies to handling, controlling, activating, powering with one-time operational output, launching, laying, sweeping, discharging, decoying, jamming, detonating, disrupting, detecting or disposing.Note:ML4.b. does not control hand-held devices limited by design solely to the detection of metal objects and incapable of distinguishing between mines and other metal objects.c.Aircraft missile protection systems (AMPS) not specified in ML4.b.1.. ML5 Fire control, surveillance and warning equipment, and related systems, test and alignment and countermeasure equipment, as follows, specially designed for military use, and specially designed components and accessories therefor: a.Weapon sights, bombing computers, gun laying equipment and weapon control systems;b. Other fire control, surveillance and warning equipment, and related systems, as follows:1.Target acquisition, designation, range-finding, surveillance or tracking systems; 2. Detection, recognition or identification equipment;3. Data fusion or sensor integration equipment;c.Countermeasure equipment for goods specified in ML5.a. or ML5.b.;Note: For the purposes of ML5.c. countermeasure equipment includes detection equipment.d.Field test or alignment equipment, specially designed for goods specified in ML5.a., ML5.b. or ML5.c.ML6Ground “vehicles” and components as follows: N.B.: Electronic guidance and navigation equipment is controlled in ML11.a.a.Ground “vehicles” and components therefor, specially designed or modified for military use;. . .Note 1: ML6.a. includes trailers. Note 2: In ML6.a. modification of a ground “vehicle” for military use entails a structural, electrical or mechanical change involving one or more specially designed military components. b.Other ground “vehicles” and components, as follows:1.“Vehicles” having all of the following:a. manufactured or fitted with materials or components to provide ballistic protection equal to or better than level III (NIJ 0108.01, September 1985) or “equivalent standards”; b.a transmission to provide drive to both front and rear wheels simultaneously, including those vehicles having additional wheels for load bearing purposes whether driven or not;c.‘Gross Vehicle Weight Rating (GVWR)’ greater than 4,500 kg; andd.designed or modified for off-road use;2.Components meeting both of the following descriptions:a.specially designed for “vehicles” specified in ML6.b.1.; andb. providing ballistic protection equal to or better than level III (NIJ 0108.01, September 1985) or “equivalent standards”; Technical Notes:1. NIJ 0108.01 means the National Institute of Justice standard for Ballistic Resistance for Protective Materials.2. ‘Gross Vehicle Weight Rating (GVWR)’ is also known as Maximum Authorised Mass, Gross Vehicle Weight or Permissible Maximum Weight.N.B.: See also ML13.a. for armoured plate.Note 1: ML6.b. does not control “vehicles” designed or modified for transporting money or valuables .Note 2: ML6.b. does not control “vehicles” fitted with, or designed or modified to be fitted with, a plough, flail or tiller for the purpose of land mine clearance.Note 3: ML6 does not control “vehicles” that meet all of the following descriptions:a.were manufactured before 1946;b.do not have items specified in this Schedule and manufactured after 1945, except for reproductions of original components or accessories for the vehicle; andc.do not incorporate weapons specified in ML1, ML2 or ML4 unless they are inoperable and incapable of discharging a projectile, including:1.in the case of firearms to which the “Deactivation Regulation” applies, by having been deactivated and marked in accordance with the technical specifications set out in Annexes I and II to that Regulation;2.in the case of firearms to which the “Deactivation Regulation” does not apply, by bearing a mark and being certified as having been rendered incapable of discharging any shot, bullet or other missile in accordance with section 8 of the Firearms (Amendment) Act 1988.ML7 Chemical agents, “biological agents”, toxic chemicals and mixtures containing such agents or chemicals, “riot control agents”, radioactive materials, related equipment, components and materials, as follows: Note:In some instances chemicals are listed by name and Chemical Abstracts Service (CAS) number. Chemicals of the same structural formula (e.g. hydrates, isotopically-labelled forms or all possible stereoisomers) are controlled regardless of name or CAS number. CAS numbers are shown to assist in identifying whether a particular chemical or mixture is controlled, irrespective of nomenclature. CAS numbers cannot be used as unique identifiers because some forms of the listed chemical have different CAS numbers, and mixtures containing a listed chemical may also have different CAS numbers.a. “Biological agents” or radioactive materials selected or modified to increase their effectiveness in producing casualties in humans or animals, degrading equipment or damaging crops or the environment; b.Chemical warfare (CW) agents including, but not limited to, the following:1.CW nerve agents:a.O-Alkyl (equal to or less than C10, including cycloalkyl) alkyl (Methyl, Ethyl, n-Propyl or Isopropyl)-phosphonofluoridates, such as:Sarin (GB):O-Isopropyl methylphosphonofluoridate (CAS 107-44-8); andSoman (GD):O-Pinacolyl methylphosphonofluoridate (CAS 96-64-0);b.O-Alkyl (equal to or less than C10, including cycloalkyl) N,N-dialkyl (Methyl, Ethyl, n-Propyl or Isopropyl) phosphoramidocyanidates, such as:Tabun (GA):O-Ethyl N,N-dimethylphosphoramidocyanidate (CAS 77-81-6);c.O-Alkyl (H or equal to or less than C10, including cycloalkyl) S-2-dialkyl (Methyl, Ethyl, n-Propyl or Isopropyl)-aminoethyl alkyl (Methyl, Ethyl, n-Propyl or Isopropyl) phosphonothiolates and corresponding alkylated and protonated salts, such as:VX: O-Ethyl S-2-diisopropylaminoethyl methyl phosphonothiolate (CAS 50782-69-9);2.CW vesicant agents:a.Sulphur mustards, such as:1.2-Chloroethylchloromethylsulphide (CAS 2625-76-5);2.Bis(2-chloroethyl) sulphide (CAS 505-60-2);3.Bis(2-chloroethylthio) methane (CAS 63869-13-6);4.1,2-bis (2-chloroethylthio) ethane (CAS 3563-36-8);5.1,3-bis (2-chloroethylthio)-n-propane (CAS 63905-10-2);6.1,4-bis (2-chloroethylthio)-n-butane (CAS 142868-93-7);7.1,5-bis (2-chloroethylthio)-n-pentane (CAS 142868-94-8);8.Bis (2-chloroethylthiomethyl) ether (CAS 63918-90-1);9.Bis (2-chloroethylthioethyl) ether (CAS 63918-89-8);b.Lewisites, such as:1.2-chlorovinyldichloroarsine (CAS 541-25-3);2.Tris (2-chlorovinyl) arsine (CAS 40334-70-1);3.Bis (2-chlorovinyl) chloroarsine (CAS 40334-69-8);c.Nitrogen mustards, such as:1.HN1: bis (2-chloroethyl) ethylamine (CAS 538-07-8);2.HN2: bis (2-chloroethyl) methylamine (CAS 51-75-2);3.HN3: tris (2-chloroethyl) amine (CAS 555-77-1);3.CW incapacitating agents, such as:a.3-Quinuclidinyl benzilate (BZ) (CAS 6581-06-2);4.CW defoliants, such as:a.Butyl 2-chloro-4-fluorophenoxyacetate (LNF);b.2,4,5-trichlorophenoxyacetic acid (CAS 93-76-5) mixed with 2,4-dichlorophenoxyacetic acid (CAS 94-75-7) (Agent Orange (CAS 39277-47-9));c.CW binary precursors and key precursors, as follows, and chemical mixtures containing one or more of these precursors:1.Alkyl (Methyl, Ethyl, n-Propyl or Isopropyl) Phosphonyl Difluorides, such as:DF: Methyl Phosphonyldifluoride (CAS 676-99-3);2.O-Alkyl (H equal to or less than C10, including cycloalkyl) O-2-dialkyl (Methyl, Ethyl, n-Propyl or Isopropyl)-aminoethyl alkyl (Methyl, Ethyl, n-Propyl or Isopropyl) phosphonites and corresponding alkylated and protonated salts, such as:QL: O-Ethyl O-2-di-isopropylaminoethyl methylphosphonite (CAS 57856-11-8);3.Chlorosarin: O-Isopropyl methylphosphonochloridate (CAS 1445-76-7);4.Chlorosoman: O-Pinacolyl methylphosphonochloridate (CAS 7040-57-5);d.“Riot control agents”, active constituent chemicals and combinations thereof including:1.α-Bromobenzeneacetonitrile, (Bromobenzyl cyanide) (CA) (CAS 5798-79-8);2.[(2-chlorophenyl) methylene] propanedinitrile, (o-Chlorobenzylidenemalononitrile) (CS) (CAS 2698-41-1);3.2-Chloro-1-phenylethanone, Phenylacyl chloride (ω-chloroacetophenone) (CN) (CAS 532-27-4);4.Dibenz-(b,f)-1,4-oxazephine (CR) (CAS 257-07-8);5.10-Chloro-5,10-dihydrophenarsazine, (Phenarsazine chloride), (Adamsite), (DM) (CAS 578-94-9);6.N-Nonanoylmorpholine, (MPA) (CAS 5299-64-9);Note 1:ML7.d. does not control “riot control agents” individually packaged for personal self-defence purposes.Note 2:ML7.d. does not control active constituent chemicals and combinations thereof identified and packaged for food production or medical purposes.e.Equipment specially designed or modified for military use, designed or modified for the dissemination of any of the following, and specially designed components therefor:1.Materials or agents specified in ML7.a., ML7.b. or ML7.d.;2.CW agents made up of precursors specified in ML7.c.;f.Protective and decontamination goods, specially designed or modified for military use, components and chemical mixtures as follows:1.Goods designed or modified for defence against materials specified in ML7.a., ML7.b. or ML7.d. and specially designed components therefor;N.B.:See also 1A of Annex I to “the dual-use Regulation”.2.Goods designed or modified for decontamination of goods contaminated with materials specified in ML7.a. or ML7.b. and specially designed components therefor;3.Chemical mixtures specially developed or formulated for the decontamination of goods contaminated with materials specified in ML7.a. or ML7.b.;g.Goods specially designed or modified for military use, designed or modified for the detection or identification of materials specified in ML7.a., ML7.b. or ML7.d. and specially designed components therefor;N.B.:See also 1A of Annex I to “the dual-use Regulation”.Note:ML7.g. does not control personal radiation monitoring dosimeters.h. ‘Biopolymers’ specially designed or processed for the detection or identification of CW agents specified in ML7.b., and the cultures of specific cells used to produce them; Technical Notes: For the purposes of ML7.h.: 1‘Biopolymers’ are biological macromolecules as follows:aEnzymes for specific chemical or biochemical reactions;b‘Anti-idiotypic’, ‘monoclonal’ or ‘polyclonal’ ‘antibodies’;cSpecially designed or specially processed ‘receptors’.2‘Anti-idiotypic antibodies’ means antibodies which bind to the specific antigen binding sites of other antibodies.3‘Monoclonal antibodies’ means proteins which bind to one antigenic site and are produced by a single clone of cells.4‘Polyclonal antibodies’ means a mixture of proteins which bind to the specific antigen and are produced by more than one clone of cells.5‘Receptors’ means biological macromolecular structures capable of binding ligands, the binding of which affects physiological functions.i.“Biocatalysts” for the decontamination or degradation of CW agents, and biological systems therefor, as follows:1.“Biocatalysts” specially designed for the decontamination or degradation of CW agents specified in ML7.b., and resulting from directed laboratory selection or genetic manipulation of biological systems;2.Biological systems containing the genetic information specific to the “production” of “biocatalysts” specified in ML7.i.1. as follows:a. ‘Expression vectors’; Technical Note: For the purposes of ML7.i.2.a., ‘expression vectors’ are carriers (e.g., plasmid or virus) used to introduce genetic material into host cells.b.Viruses;c.Cultures of cells.Note 1:ML7.b. and ML7.d. do not control:a.Cyanogen chloride (CAS 506-77-4);N.B.:See 1C of Annex I to “the dual-use Regulation”.b.Hydrocyanic acid (CAS 74-90-8);c.Chlorine (CAS 7782-50-5);d.Carbonyl chloride (phosgene) (CAS 75-44-5);N.B.:See 1C of Annex I to “the dual-use Regulation”.e.Diphosgene (trichloromethyl-1-chloroformate) (CAS 503-38-8);f.This entry is not used;g.Xylyl bromide: ortho: (CAS 89-92-9), meta: (CAS 620-13-3), para: (CAS 104-81-4);h.Benzyl bromide (CAS 100-39-01);i.Benzyl iodide (CAS 620-05-3);j.Bromo acetone (CAS 598-31-2);k.Cyanogen bromide (CAS 506-68-3);l.Bromo methylethylketone (CAS 816-40-0);m.Chloro acetone (CAS 78-95-5);n.Ethyl iodoacetate (CAS 623-48-3);o.Iodo acetone (CAS 3019-04-3);p.Chloropicrin (CAS 76-06-2);N.B.:See 1C of Annex I to “the dual-use Regulation”.q.Pelargonic acid vanillylamide (PAVA) (CAS 2444-46-4);N.B.:See 3.2. of Annex III to “the torture Regulation”.r.Oleoresin capsicum (OC) (CAS 8023-77-6).N.B.:See 3.3. of Annex III to “the torture Regulation”.Note 2:The cultures of cells and biological systems specified in ML7.h. and ML7.i.2. are exclusive and ML7.h. and ML7.i.2. do not include cells or biological systems for civil purposes, (e.g. agricultural, pharmaceutical, medical, veterinary, environmental, waste management, or in the food industry).ML8“Energetic materials”, and related substances, as follows:N.B.:Charges and devices are controlled in ML4 and 1A008 of Annex I to “the dual-use Regulation”.Note:In some instances chemicals are listed by name and Chemical Abstracts Service (CAS) number. Chemicals of the same structural formula (e.g. hydrates, isotopically-labelled forms or all possible stereoisomers) are controlled regardless of name or CAS number. CAS numbers are shown to assist in identifying whether a particular chemical or ‘mixture’ is controlled, irrespective of nomenclature. CAS numbers cannot be used as unique identifiers because some forms of the listed chemical have different CAS numbers, and ‘mixtures’ containing a listed chemical may also have different CAS numbers.Technical Note:1. For the purposes of ML8, excluding ML8.c.11. and ML8.c.12., a ‘mixture’ refers to a composition of two or more substances with at least one substance being controlled in ML8.2. For the purposes of ML8, particle size is the mean particle diameter on a weight or volume basis. International or equivalent national standards will be used in sampling and determining particle size.a.“Explosives”, as follows, and ‘mixtures’ thereof:1.ADNBF (aminodinitrobenzofuroxan or 7-amino-4,6-dinitrobenzofurazane-1-oxide) (CAS 97096-78-1);2BNCP (cis-bis (5-nitrotetrazolato) tetra amine-cobalt (III) perchlorate) (CAS 117412-28-9);3CL-14 (diamino dinitrobenzofuroxan or 5,7-diamino-4,6-dinitrobenzofurazane-1-oxide) (CAS 117907-74-1);4.CL-20 (HNIW or Hexanitrohexaazaisowurtzitane) (CAS 135285-90-4); chlathrates of CL-20;5.CP (2-(5-cyanotetrazolato)penta amine-cobalt (III) perchlorate) (CAS 70247-32-4);6.DADE (1,1-diamino-2,2-dinitroethylene, FOX-7) (CAS 145250-81-3);7.DATB (diaminotrinitrobenzene) (CAS 1630-08-6);8.DDFP (1,4-dinitrodifurazanopiperazine);9.DDPO (2,6-diamino-3,5-dinitropyrazine-1-oxide, PZO) (CAS 194486-77-6);10.DIPAM (3,3’-diamino-2,2’,4,4’,6,6’-hexanitrobiphenyl or dipicramide) (CAS 17215-44-0);11.DNGU (DINGU or dinitroglycoluril) (CAS 55510-04-8);12.Furazans as follows:a.DAAOF (DAAF, DDAFox, or diaminoazoxyfurazan);b.DAAzF (diaminoazofurazan) (CAS 78644-90-3);13.HMX and derivatives as follows:a.HMX (Cyclotetramethylenetetranitramine, octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazine, 1,3,5,7-tetranitro-1,3,5,7-tetraza-cyclooctane, octogen or octogene) (CAS 2691-41-0);bdifluoroaminated analogs of HMX;c.K-55 (2,4,6,8-tetranitro-2,4,6,8-tetraazabicyclo-[3,3,0]-octanone-3, tetranitrosemiglycouril or keto-bicyclic HMX) (CAS 130256-72-3);14.HNAD (hexanitroadamantane) (CAS 143850-71-9);15.HNS (hexanitrostilbene) (CAS 20062-22-0);16.Imidazoles as follows:a.BNNII (Octahydro-2,5-bis(nitroimino)imidazo [4,5-d]imidazole);b.DNI (2,4-dinitroimidazole) (CAS 5213-49-0);c.FDIA (1-fluoro-2,4-dinitroimidazole);d.NTDNIA (N-(2-nitrotriazolo)-2,4-dinitroimidazole);e.PTIA (1-picryl-2,4,5-trinitroimidazole);17.NTNMH (1-(2-nitrotriazolo)-2-dinitromethylene hydrazine);18.NTO (ONTA or 3-nitro-1,2,4-triazol-5-one) (CAS 932-64-9);19.Polynitrocubanes with more than four nitro groups;20.PYX (2,6-bis(picrylamino)-3,5-dinitropyridine) (CAS 38082-89-2);21.RDX and derivatives as follows:a.RDX (cyclotrimethylenetrinitramine, cyclonite, T4, hexahydro-1,3,5-trinitro-1,3,5-triazine, 1,3,5-trinitro-1,3,5-triaza-cyclohexane, hexogen or hexogene) (CAS 121-82-4);b.Keto-RDX (K-6 or 2,4,6-trinitro-2,4,6-triazacyclohexanone) (CAS 115029-35-1);22.TAGN (triaminoguanidinenitrate) (CAS 4000-16-2);23.TATB (triaminotrinitrobenzene) (CAS 3058-38-6);24.TEDDZ (3,3,7,7-tetrabis(difluoroamine) octahydro-1,5-dinitro-1,5-diazocine);25.Tetrazoles as follows:a.NTAT (nitrotriazol aminotetrazole);b.NTNT (1-N-(2-nitrotriazolo)-4-nitrotetrazole);26.Tetryl (trinitrophenylmethylnitramine) (CAS 479-45-8);27.TNAD (1,4,5,8-tetranitro-1,4,5,8-tetraazadecalin) (CAS 135877-16-6);28.TNAZ (1,3,3-trinitroazetidine) (CAS 97645-24-4);29.TNGU (SORGUYL or tetranitroglycoluril) (CAS 55510-03-7);30.TNP (1,4,5,8-tetranitro-pyridazino[4,5-d]pyridazine) (CAS 229176-04-9);31.Triazines as follows:a.DNAM (2-oxy-4,6-dinitroamino-s-triazine) (CAS 19899-80-0);b.NNHT (2-nitroimino-5-nitro-hexahydro-1,3,5-triazine) (CAS 130400-13-4);32.Triazoles as follows:a.5-azido-2-nitrotriazole;b.ADHTDN (4-amino-3,5-dihydrazino-1,2,4-triazole dinitramide) (CAS 1614-08-0);c.ADNT (1-amino-3,5-dinitro-1,2,4-triazole);d.BDNTA ((bis-dinitrotriazole)amine);e.DBT (3,3’-dinitro-5,5-bi-1,2,4-triazole) (CAS 30003-46-4);f.DNBT (dinitrobistriazole) (CAS 70890-46-9);g.This entry is not used.h.NTDNT (1-N-(2-nitrotriazolo)-3,5-dinitrotriazole);i.PDNT (1-picryl-3,5-dinitrotriazole);j.TACOT (tetranitrobenzotriazolobenzotriazole) (CAS 25243-36-1);33.“Explosives” not listed elsewhere in ML8.a. and meeting any of the following descriptions:a.Detonation velocity exceeding 8,700 m/s at maximum density orb.Detonation pressure exceeding 34 GPa (340 kbar)34.This entry is not used;35.DNAN (2,4-dinitroanisole) (CAS 119-27-7);36.TEX (4,10-Dinitro-2,6,8,12-tetraoxa-4,10-diazaisowurtzitane);37.GUDN (Guanylurea dinitramide) FOX-12 (CAS 217464-38-5);38.Tetrazines as follows:a.BTAT (Bis(2,2,2-trinitroethyl)-3,6-diaminotetrazine);b.LAX-112 (3,6-diamino-1,2,4,5-tetrazine-1,4-dioxide);39.Energetic ionic materials melting between 343 K (70°C) and 373 K (100°C) and with detonation velocity exceeding 6,800 m/s or detonation pressure exceeding 18 GPa (180 kbar); 40. BTNEN (Bis(2,2,2-trinitroethyl)-nitramine) (CAS 19836-28-3);41. FTDO (5,6-(3’,4’-furazano)-1,2,3,4-tetrazine-1,3-dioxide); 42. EDNA (Ethylenedinitramine) (CAS 505-71-5); 43. TKX-50 (Dihydroxylammonium 5,5’-bistetrazole-1,1’-diolate).Note:ML8.a. includes ‘explosive co-crystals’.Technical Note: For the purposes of ML8.a., an ‘explosive co-crystal’ is a solid material consisting of an ordered three dimensional arrangement of two or more explosive molecules, where at least one is specified in ML8.a.b.“Propellants” as follows:1.Any solid “propellant” with a theoretical specific impulse (under standard conditions) of more than:a.240 seconds for non-metallised, non-halogenised “propellant”;b.250 seconds for non-metallised, halogenised “propellant”;c.260 seconds for metallised “propellant”;2.This entry is not used;3.“Propellants” having a force constant of more than 1,200 kJ/kg;4.“Propellants” that can sustain a steady-state linear burning rate of more than 38 mm/s under standard conditions (as measured in the form of an inhibited single strand) of 6.89 MPa (68.9 bar) pressure and 294 K (21oC);5.Elastomer Modified Cast Double Base (EMCDB) “propellants” with extensibility at maximum stress of more than 5% at 233 K (-40oC);6.Any “propellant” containing substances specified in ML8.a.;7.“Propellants” not specified elsewhere in this Schedule, specially designed for military use.c.“Pyrotechnics”, fuels and related substances, as follows, and ‘mixtures’ thereof:1. “Aircraft” fuels specially formulated for military purposes; Note 1: ML8.c.1. does not control the following “aircraft” fuels: JP-4, JP-5, and JP-8. Note 2: “Aircraft” fuels controlled in ML8.c.1. are finished goods, not their constituents.2.Alane (aluminium hydride) (CAS 7784-21-6);3. Boranes, as follows, and their derivatives: Carboranes;Borane homologues, as follows:Decaborane (14) (CAS 17702-41-9);Pentaborane (9) (CAS 19624-22-7);Pentaborane (11) (CAS 18433-84-6);4.Hydrazine and derivatives as follows (see also ML8.d.8. and ML8.d.9. for oxidising hydrazine derivatives);a.Hydrazine (CAS 302-01-2) in concentrations of 70% or more;Note:ML8.c.4.a. does not control hydrazine ‘mixtures’ specially formulated for corrosion control.b.Monomethyl hydrazine (CAS 60-34-4);c.Symmetrical dimethyl hydrazine (CAS 540-73-8);d.Unsymmetrical dimethyl hydrazine (CAS 57-14-7);5. Metal fuels, fuel ‘mixtures’ or “pyrotechnic” mixtures, in particle form whether spherical, atomised, spheroidal, flaked or ground, manufactured from material consisting of 99% or more of any of the following: a.Metals as follows and ‘mixtures’ thereof:1.Beryllium (CAS 7440-41-7) in particle sizes of less than 60µm;2.Iron powder (CAS 7439-89-6) with particle size of 3µm or less produced by reduction of iron oxide with hydrogen;b.‘Mixtures’ containing any of the following:1.Zirconium (CAS 7440-67-7), magnesium (CAS 7439-95-4) or alloys of these in particle sizes of less than 60µm;2.Boron (CAS 7440-42-8) or boron carbide (CAS 12069-32-8) fuels of 85% purity or higher and particle sizes of less than 60µm;Note 1:ML8.c.5.b.2 does not control boron and boron carbide enriched with boron-10 (20% or more of total boron-10 content).Note 2:ML8.c.5.b. only controls metal fuels in particle form when they are mixed with other substances to form a ‘mixture’ formulated for military purposes such as liquid “propellant” slurries, solid “propellants” or “pyrotechnic” mixtures.Note 3:ML8.c.5. controls “explosives” and fuels, whether or not the metals or alloys are encapsulated in aluminium, magnesium, zirconium or beryllium.N.B.:See also 1C of Annex I to “the dual-use Regulation”.6.Military material containing thickeners for hydrocarbon fuels specially formulated for use in flame throwers or incendiary munitions, such as metal stearates (e.g., octal (CAS 637-12-7) or palmitates;7.Perchlorates, chlorates and chromates composited with powdered metal or other high energy fuel components;8.Spherical or spheroidal aluminium powder (CAS 7429-90-5) with a particle size of 60μm or less, and manufactured from material with an aluminium content of 99% or more;9.Titanium subhydride (TiHn) of stoichiometry equivalent to n = 0.65-1.68;10.Liquid high energy density fuels not specified in ML8.c.1., as follows:a.Mixed fuels, that incorporate both solid and liquid fuels (e.g., boron slurry), having a mass-based energy density of 40 MJ/kg or greater;b.Other high energy density fuels and fuel additives (e.g., cubane, ionic solutions, JP-7, JP-10), having a volume-based energy density of 37.5 GJ per cubic meter or greater, measured at 293 K (20°C) and one atmosphere (101.325 kPa) pressure;Note: ML8.c.10.b. does not control ... fossil refined fuels or biofuels, or fuels for engines certified for use in civil aviation.11.“Pyrotechnic” and pyrophoric materials as follows:a.“Pyrotechnic” or pyrophoric materials specifically formulated to enhance or control the production of radiated energy in any part of the IR spectrum;b.Mixtures of magnesium, polytetrafluoroethylene (PTFE) and a vinylidene difluoride- hexafluoropropylene copolymer (e.g., MTV);12.Fuel mixtures, “pyrotechnic” mixtures or “energetic materials”, not specified elsewhere in ML8, having all of the following:a.Containing greater than 0.5% of particles of any of the following:1.Aluminium;2.Beryllium;3.Boron;4.Zirconium;5.Magnesium; or6.Titanium;b.Particles specified in ML8.c.12.a. with a size less than 200 nm in any direction; andc.Particles specified in ML8.c.12.a. with a metal content of 60% or greater;Note:ML8.c.12. includes thermites.d.Oxidisers, as follows, and ‘mixtures’ thereof:1.ADN (ammonium dinitramide or SR 12) (CAS 140456-78-6);2.AP (ammonium perchlorate) (CAS 7790-98-9);3.Compounds composed of fluorine and any of the following:a.Other halogens;b.Oxygen; orc.Nitrogen;Note 1:ML8.d.3. does not control chlorine trifluoride (CAS 7790-91-2).Note 2:ML8.d.3. does not control nitrogen trifluoride in its gaseous state (CAS 7783-54-2). Note 3: ML8.d.3. does not control iodine pentafluoride (CAS 7783-66-6).N.B.:See also 1C of Annex I to “the dual-use Regulation”.4.DNAD (1,3-dinitro-1,3-diazetidine) (CAS 78246-06-7);5.HAN (hydroxylammonium nitrate) (CAS 13465-08-2);6.HAP (hydroxylammonium perchlorate) (CAS 15588-62-2);7.HNF (hydrazinium nitroformate) (CAS 20773-28-8);8.Hydrazine nitrate (CAS 37836-27-4);9.Hydrazine perchlorate (CAS 27978-54-7);10.Liquid oxidisers comprised of or containing inhibited red fuming nitric acid (IRFNA) (CAS 8007-58-7);e.Binders, plasticisers, monomers and polymers as follows:1.AMMO (azidomethylmethyloxetane and its polymers) (CAS 90683-29-7);2.BAMO (3,3-bis(azidomethyl)oxetane and its polymers) (CAS 17607-20-4);3.BDNPA (bis (2,2-dinitropropyl)acetal) (CAS 5108-69-0);4.BDNPF (bis (2,2-dinitropropyl)formal) (CAS 5917-61-3);5.BTTN (butanetrioltrinitrate) (CAS 6659-60-5);6.Energetic monomers, plasticisers or polymers specially formulated for military use and containing any of the following:a.Nitro groups;b.Azido groups;c.Nitrate groups;d.Nitraza groups; ore.Difluoroamino groups;7.FAMAO (3-difluoroaminomethyl-3-azidomethyl oxetane) and its polymers;8.FEFO (bis-(2-fluoro-2,2-dinitroethyl) formal) (CAS 17003-79-1);9.FPF-1 (poly-2,2,3,3,4,4-hexafluoropentane-1,5-diol formal) (CAS 376-90-9);10.FPF-3 (poly-2,4,4,5,5,6,6-heptafluoro-2-tri-fluoromethyl-3-oxaheptane-1,7-diol formal);11.GAP (glycidylazide polymer) (CAS 143178-24-9) and its derivatives;12.HTPB (hydroxyl terminated polybutadiene) with a hydroxyl functionality equal to or greater than 2.2 and less than or equal to 2.4, a hydroxyl value of less than 0.77 meq/g, and a viscosity at 30oC of less than 47 poise (CAS 69102-90-5);13.Alcohol functionalised poly(epichlorohydrin) with a molecular weight of less than 10,000, as follows:a.Poly(epichlorohydrindiol); andb.Poly(epichlorohydrintriol);14.NENAs (nitratoethylnitramine compounds) (CAS 17096-47-8, 85068-73-1, 82486-83-7, 82486-82-6 and 85954-06-9);15.PGN (poly-GLYN, polyglycidylnitrate or poly(nitratomethyl oxirane)) (CAS 27814-48-8);16.Poly-NIMMO (poly (nitratomethylmethyloxetane), poly-NMMO or (poly (3-Nitratomethyl-3-methyloxetane)) (CAS 84051-81-0);17.Polynitroorthocarbonates;18.TVOPA (1,2,3-tris[1,2-bis(difluoroamino)ethoxy] propane or tris vinoxy propane adduct) (CAS 53159-39-0);19.4,5 diazidomethyl-2-methyl-1,2,3-triazole (iso- DAMTR);20.PNO (Poly(3-nitrato oxetane));21. TMETN (Trimethylolethane trinitrate) (CAS 3032-55-1); f.Additives as follows:1.Basic copper salicylate (CAS 62320-94-9);2.BHEGA (bis-(2-hydroxyethyl) glycolamide) (CAS 17409-41-5);3.BNO (butadienenitrileoxide);4.Ferrocene derivatives as follows:a.Butacene (CAS 125856-62-4);b.Catocene (2,2-bis-ethylferrocenyl propane) (CAS 37206-42-1);c.Ferrocene carboxylic acids and ferrocene carboxylic acid esters;d.n-butyl-ferrocene (CAS 31904-29-7);e.Other adducted polymer ferrocene derivatives not specified elsewhere in ML8.f.4.;f.Ethyl ferrocene (CAS 1273-89-8);g.Propyl ferrocene;h.Pentyl ferrocene (CAS 1274-00-6);i.Dicyclopentyl ferrocene;j.Dicyclohexyl ferrocene;k.Diethyl ferrocene (CAS 1273-97-8);l.Dipropyl ferrocene;m.Dibutyl ferrocene (CAS 1274-08-4);n.Dihexyl ferrocene (CAS 93894-59-8);o.Acetyl ferrocene (CAS 1271-55-2)/1,1’-diacetyl ferrocene (CAS-1273-94-5);5. Lead beta-resorcylate (CAS 20936-32-7) or copper beta-resorcylate (CAS 70983-44-7) 6.Lead citrate (CAS 14450-60-3);7.Lead-copper chelates of beta-resorcylate or salicylates (CAS 68411-07-4);8.Lead maleate (CAS 19136-34-6);9.Lead salicylate (CAS 15748-73-9);10.Lead stannate (CAS 12036-31-6);11.MAPO (tris-1-(2-methyl)aziridinyl phosphine oxide) (CAS 57-39-6), and BOBBA 8 (bis(2-methyl aziridinyl)-2-(2-hydroxypropanoxy) propylamino phosphine oxide); and other MAPO derivatives;12.Methyl BAPO (bis(2-methyl aziridinyl) methylamino phosphine oxide) (CAS 85068-72-0);13.N-methyl-p-nitroaniline (CAS 100-15-2);14.3-Nitraza-1,5-pentane diisocyanate (CAS 7406-61-9);15.Organo-metallic coupling agents as follows:a.Neopentyl[diallyl]oxy, tri[dioctyl]phosphato-titanate (CAS 103850-22-2); also known as titanium IV, 2,2-[bis 2-propenolatomethyl, butanolato, tris (dioctyl) phosphato] (CAS 110438-25-0); or LICA 12 (CAS 103850-22-2);b.Titanium IV, [(2-propenolato-1) methyl, n-propanolatomethyl] butanolato-1, tris[dioctyl] pyrophosphate or KR3538;c.Titanium IV, [(2-propenolato-1) methyl, n-propanolatomethyl] butanolato-1, tris(dioctyl)phosphate;16.Polycyanodifluoroaminoethyleneoxide;17.Bonding agents as follows:a.1,1R,1S-trimeoyl-tris(2-ethylaziridine) (HX-868, BITA) (CAS 7722-73-8);b.Polyfunctional aziridine amides with isophthalic, trimesic, isocyanuric or trimethyladipic backbone also having a 2-methyl or 2-ethyl aziridine group;Note:ML8.f.17.b. includes:a.1,1H-Isophthaloyl-bis(2-methylaziridine) (HX-752) (CAS 7652-64-4);b.2,4,6-tris(2-ethyl-1-aziridinyl)-1,3,5-triazine (HX-874) (CAS 18924-91-9);c.1,1’-trimethyladipoyl-bis(2-ethylaziridine)(HX-877) (CAS 71463-62-2).18.Propyleneimine (2-methylaziridine) (CAS 75-55-8);19.Superfine iron oxide (Fe2O3)(CAS 1317-60-8) with a specific surface area more than 250 m2/g and an average particle size of 3.0 nm or less;20.TEPAN (tetraethylenepentaamineacrylonitrile) (CAS 68412-45-3); cyanoethylated polyamines and their salts;21.TEPANOL (tetraethylenepentaamineacrylonitrileglycidol) (CAS 68412-46-4); cyanoethylated polyamines adducted with glycidol and their salts;22.TPB (triphenyl bismuth) (CAS 603-33-8);23.TEPB (Tris (ethoxyphenyl) bismuth) (CAS 90591-48-3);g.Precursors as follows:1.BCMO (3,3-bis(chloromethyl)oxetane) (CAS 78-71-7);2.Dinitroazetidine-t-butyl salt (CAS 125735-38-8);3.Hexaazaisowurtzitane derivates including HBIW (hexabenzylhexaazaisowurtzitane) (CAS 124782-15-6) (see also ML8.a.4.) and TAIW (tetraacetyldibenzylhexaazaisowurtzitane) (CAS 182763-60-6) (see also ML8.a.4.);4.This entry is not used;5.TAT (1,3,5,7-tetraacetyl-1,3,5,7-tetraaza cyclo-octane) (CAS 41378-98-7);6.1,4,5,8-tetraazadecalin (CAS 5409-42-7);7.1,3,5-trichlorobenzene (CAS 108-70-3);8.1,2,4-trihydroxybutane (1,2,4-butanetriol) (CAS 3068-00-6);9.DADN (1,5-diacetyl-3,7-dinitro-1,3,5,7-tetraaza-cyclooctane) (see also ML8.a.13.); h. ‘Reactive material’ powders and shapes, as follows:1.Powders of any of the following materials, with a particle size less than 250 µm in any direction and not specified elsewhere in ML8:a.Aluminium;b.Niobium;c.Boron;d.Zirconium;e.Magnesium;f.Titanium;g.Tantalum;h.Tungsten;i.Molybdenum; orj.Hafnium;2.Shapes, not specified in ML3, ML4, ML12 or ML16, fabricated from powders specified in ML8.h.1.Technical Notes: For the purposes of ML8.h.: 1.‘Reactive materials’ are designed to produce an exothermic reaction only at high shear rates and for use as liners or casings in warheads.2.‘Reactive material’ powders are produced by, for example, a high energy ball milling process.3.‘Reactive material’ shapes are produced by, for example, selective laser sintering.ML9“Vessels” of war, special naval equipment, accessories, components and other surface “vessels”, as follows:N.B.:Electronic guidance and navigation equipment is controlled in ML11.a.a.“Vessels” and components as follows:1.“Vessels” (surface or underwater) specially designed or modified for military use, regardless of current state of repair or operating condition, and whether or not they contain weapon delivery systems or armour, and components therefor specially designed or modified for military use;Note:ML9.a.1. includes vehicles specially designed or modified for delivery of divers.2.Surface “vessels” not specified in ML9.a.1., having any of the following, fixed or integrated into the “vessel”:a.Automatic weapons having a calibre of 12.7 mm or greater specified in ML1, or weapons specified in ML2, ML4, ML12 or ML19, or ‘mountings’ or hard points for weapons having a calibre of 12.7mm or greater;Technical Note: For the purposes of ML9.a.2.a., ‘mountings refers to weapon mounts or structural strengthening for the purposes of installing weapons.b.Fire control systems specified in ML5;c.Both:1.‘CBRN protection’; and2. ‘Pre-wet or wash down system’ designed for decontamination purposes; orTechnical Notes:For the purposes of ML9.a.2.c.2., 'pre-wet or wash down system' is a seawater spray system capable of simultaneously wetting the exterior superstructure and decks of a vessel.d.Active weapon countermeasure systems specified in ML4.b., ML5.c. or ML11.a. but only where the “vessel” has any of the following:1.‘CBRN protection’;2.Hull and superstructure, specially designed to reduce the radar cross section;3Thermal signature reduction devices, (e.g. an exhaust gas cooling system), excluding those specially designed to increase overall power plant efficiency or to reduce the environmental impact; or4A degaussing system designed to reduce the magnetic signature of the whole vessel.Technical Note: For the purposes of ML9.a.2., 'CBRN protection' is a self-contained interior space containing features such as over-pressurisation, isolation of ventilation systems, limited ventilation openings with CBRN filters and limited personnel access points incorporating air-locks.b.Anti-submarine nets and anti-torpedo nets, specially designed for military use;c.Hull penetrators and connectors specially designed for military use, that enable interaction with equipment external to a “vessel”, and components therefor specially designed for military use.ML10“Aircraft”, “lighter-than-air vehicles”, “Unmanned Aerial Vehicles” (“UAVs”), aero-engines , “sub-orbital craft” and “aircraft” equipment, related goods and components, as follows, specially designed or modified for military use:N.B.:Electronic guidance and navigation equipment is controlled in ML11.a.a.Manned “aircraft” and “lighter-than-air vehicles”, and specially designed components therefor;Note:ML10.a. does not control “aircraft” or “lighter-than-air vehicles” meeting all of the following descriptions:a.were first manufactured before 1946;b.do not incorporate items specified in this Schedule unless the items are required to meet safety or airworthiness standards; andc.do not incorporate weapons specified in this Schedule, unless they have been rendered inoperable and incapable of being returned to operation, including:1.in the case of firearms to which the “Deactivation Regulation” applies, by having been deactivated and marked in accordance with the technical specifications set out in Annexes I and II to that Regulation;2.in the case of firearms to which the “Deactivation Regulation” does not apply, by bearing a mark and being certified as having been rendered incapable of discharging any shot, bullet or other missile in accordance with section 8 of the Firearms (Amendment) Act 1988.b.This entry is not used.c. Unmanned “aircraft” and related equipment, as follows, and specially designed components therefor: 1.“UAVs” Remotely Piloted Air Vehicles (RPVs), autonomous programmable vehicles and unmanned “lighter-than-air vehicles”;2.Launchers, recovery equipment and ground support equipment;3.Equipment designed for command and control;d.Propulsion aero-engines and specially designed components therefor;Note:ML10.d. does not control propulsion aero-engines that were first manufactured before 1946.e.Airborne refuelling equipment specially designed or modified for any of the following, and specially designed components therefor:1.“Aircraft” specified in ML10.a.; or2. Unmanned “aircraft” specified in ML10.c; f. Ground equipment specially designed for “aircraft” specified in ML10.a. or aero-engines specified in ML10.d.; Note 1:ML10.f. includes pressure refuelling equipment and equipment designed to facilitate operations in confined areas, including equipment located on board a ship.Note 2:ML10.f. does not control:1.Towbars;2.Protective mats and covers;3.Ladders, steps and platforms;4.Chocks, lashings and tie-down equipment.g.Aircrew life support equipment, aircrew safety equipment and other devices for emergency escape, not specified in ML10.a., designed for “aircraft” specified in ML10.a. or “sub-orbital craft” specified in ML10.j.;Note:ML10.g. does not control aircrew helmets that do not incorporate, or have mountings or fittings for, equipment specified in this Schedule.N.B.:For helmets, see also ML13.c.h.Parachutes, paragliders and related equipment, as follows, and specially designed components therefor:1. Parachutes, other than those which form part of items controlled elsewhere in this Schedule; 2.Paragliders;3.Equipment specially designed for high altitude parachutists;i.Controlled opening equipment or automatic piloting systems designed for parachuted loads; j. “Sub-orbital craft” and related equipment, as follows, and specially designed or modified components therefor:1.“Sub-orbital craft”;2. Launch equipment, recovery equipment and ground support equipment;3.Equipment designed for command or control.. . .ML11Electronic equipment, “spacecraft” and components, not specified elsewhere in this Schedule, as follows:a.Electronic equipment specially designed or modified for military use and specially designed components therefor;Note:ML11.a. controls all electronic guidance and navigation equipment.b. Jamming equipment designed or modified to hinder the reception, operation or effectiveness of positioning, navigation or timing services provided by “satellite navigation systems”, and specially designed components therefor; c.“Spacecraft” specially designed or modified for military use, and “spacecraft” components specially designed for military use.ML12High velocity kinetic energy weapon systems and related equipment, as follows, and specially designed components therefor:a.Kinetic energy weapon systems specially designed for destruction or effecting mission abort of a target;N.B.:For weapon systems using sub-calibre ammunition or employing solely chemical propulsion, and ammunition therefor, see ML1 to ML4.b.Specially designed test and evaluation facilities and test models (e.g. diagnostic instrumentation and targets), for dynamic testing of kinetic energy projectiles and systems. ML13Armoured or protective goods, constructions, components and accessories, as follows:a.Metallic or non-metallic armoured plate, having any of the following characteristics:1.Manufactured to comply with a military standard or specification; or2.Suitable for military use; N.B.: For body armour plates, see ML13.d.2..b.Constructions of metallic or non-metallic materials, or combinations thereof, specially designed to provide ballistic protection for military systems and specially designed components therefor;c.Helmets and specially designed components and accessories therefor, as follows: 1.Helmets manufactured according to military standards or specifications, or comparable national standards; 2.Shells, liners, or comfort pads, specially designed for helmets specified in ML13.c.1.;3.Add-on ballistic protection elements, specially designed for helmets specified in ML13.c.1.; Note 1: ML13.c. does not control helmets that meet all of the following: a.Were first manufactured before 1970;b.Are neither designed or modified to accept, nor equipped with items specified in this Schedule.Note 2:ML13.c. does not control individual helmets when accompanying their users.N.B.:Military high altitude parachutists’ protective headgear is controlled in ML10.h.3..d.Body armour or protective garments, and components therefor, as follows:1.Soft body armour or protective garments, manufactured to military standards or specifications, or to their equivalents, and specially designed components therefor;Note 1:For the purposes of ML13.d.1., military standards or specifications include, at a minimum, specifications for fragmentation protection.Note 2:ML13.d.1. does not control protective eyewear.N.B.:For “laser” protective eyewear, see ML17.o..2.Hard body armour plates providing ballistic protection equal to or better than level III (NIJ 0101.06 July 2008) or equivalent standards.Note:ML13.d. does not control individual suits of body armour or ballistic protective garments for personal protection and accessories therefor when accompanying their users.N.B.:See also 1A of Annex I to “the dual-use Regulation”.ML14Specialised equipment for military training or for simulating military scenarios, simulators specially designed for training in the use of any firearm or weapon specified in ML1 or ML2, and specially designed components and accessories therefor.ML15Imaging or countermeasure equipment, as follows, specially designed for military use, and specially designed components and accessories therefor:a.Recorders and image processing equipment;b.Cameras, photographic equipment and film processing equipment;c.Image intensifier equipment;d.Infrared or thermal imaging equipment;e.Imaging radar sensor equipment;f.Countermeasure or counter-countermeasure equipment for the equipment specified in ML15.a. to ML15.e.Note: ML15.f. includes equipment designed to degrade the operation or effectiveness of military imaging systems or to minimise such degrading effects. Note:ML15 does not control “first generation image intensifier tubes” or equipment specially designed so that only “first generation image intensifier tubes” are or can be incorporated in it.N.B. 1:For weapons sights incorporating “first generation image intensifier tubes” see ML1., ML2. and ML5.N.B. 2:See also 6A of Annex I to “the dual-use Regulation”.ML16Forgings, castings and other unfinished goods, specially designed for any of the goods specified in ML1 to ML4, ML6, ML9, ML10, ML12 or ML19.ML17Miscellaneous goods, material and “libraries”, as follows, and specially designed components therefor:a.Diving and underwater swimming apparatus, specially designed or modified for military use, as follows:1.Self-contained diving rebreathers, closed or semi-closed circuit;2.Underwater swimming apparatus specially designed for use with the diving apparatus specified in ML17.a.1.;N.B.:See also 8A002.q. of Annex I to “the dual-use Regulation”.b.Construction equipment specially designed for military use;c.Fittings, coatings and treatments for signature suppression, specially designed for military use;d.Field engineer equipment specially designed for use in a combat zone;e.“Robots”, “robot” controllers and “robot” “end-effectors”, meeting any of the following descriptions:1.Specially designed for military use;2.Incorporating means of protecting hydraulic lines against externally induced punctures caused by ballistic fragments (e.g. incorporating self-sealing lines) and designed to use hydraulic fluids with flash points higher than 839 K (566oC); or3.Specially designed or rated for operating in an ‘electromagnetic pulse’ (‘EMP’) environment;Technical Note: For the purposes of ML17.e.3., ‘EMP’ does not refer to unintentional interference caused by electromagnetic radiation from nearby equipment (e.g. machinery, appliances or electronics) or lightning.f.“Libraries” specially designed or modified for military use with systems, equipment or components, specified in this Schedule;g. Nuclear power generating equipment or propulsion equipment, not specified elsewhere in this Schedule, specially designed for military use and components therefor, specially designed or modified for military use; Note:ML17.g. includes “nuclear reactors”h.Goods and material, coated, treated or prepared to provide signature suppression, specially designed for military use, not controlled elsewhere in this Schedule;i.Simulators specially designed for military “nuclear reactors”;j.Mobile repair shops specially designed or modified to service military equipment;k.Field generators specially designed or modified for military use;l. ISO intermodal containers or demountable vehicle bodies (i.e., swap bodies), specially designed or modified for military use; m.Ferries, not controlled elsewhere in this Schedule, ... bridges and pontoons, specially designed for military use;n.Test models specially designed for the “development” of goods specified in ML4, ML6, ML9 or ML10;o. “Laser” protection equipment (e.g. eye or sensor protection) specially designed for military use; p. “Fuel cells”, other than those which form components of items controlled elsewhere in this Schedule, specially designed or modified for military use. ML18“Production” equipment , environmental test facilities, and components, as follows:a. Equipment specially designed or modified ... for the “production” of goods specified in this Schedule, and specially designed components therefor;b. Environmental test facilities, specially designed for the certification, qualification or testing of goods specified in this Schedule, and specially designed equipment therefor, not specified elsewhere in this Schedule ML19Directed energy weapon (DEW) systems, related or countermeasure equipment and test models, as follows, and specially designed components therefor:a. “Laser” ‘weapon systems’ not specified by ML19.f.; b.Particle beam ‘weapon systems’;c.High power Radio-Frequency (RF) ‘weapon systems’;d.Equipment specially designed for the detection or identification of, or defence against, systems specified in ML19.a. to ML19.c.;e.Physical test models for the systems, equipment and components specified in ML19;f.“Laser” systems specially designed to cause permanent blindness to un-enhanced vision (i.e. to the naked eye or to the eye with corrective eyesight devices). Technical note: For the purposes of ML19, ‘weapon systems’ are designed to damage, destroy or effect mission abort of a target.ML20Cryogenic and “superconductive” equipment, as follows, and specially designed components and accessories therefor:a.Equipment specially designed or configured to be installed in a vehicle for military ground, marine, airborne or space applications, capable of operating while in motion and of producing or maintaining temperatures below 103 K (-170oC);b.“Superconductive” electrical equipment (rotating machinery or transformers) specially designed or configured to be installed in a vehicle for military ground, marine, airborne or space applications and capable of operating while in motion.Note:ML20 does not control direct-current hybrid homopolar generators that have single-pole normal metal armatures which rotate in a magnetic field produced by superconducting windings, provided those windings are the only superconducting component in the generator.ML21“Software” as follows:a.“Software” specially designed or modified for any of the following:1.“Development”, “production” operation or maintenance of equipment specified in this Schedule;2.“Development” or “production” of materials specified in this Schedule; or3.“Development”, “production”, operation or maintenance of “software” specified in this Schedule.b.Specific “software”, other than that specified in ML21.a., as follows:1.“Software” that is both specially designed for military use and specially designed for modelling, simulating or evaluating military weapons systems;2.“Software” that is both specially designed for military use and specially designed for modelling or simulating military operational scenarios;3.“Software” for determining the effects of conventional, nuclear, chemical or biological weapons;4.“Software” that is both specially designed for military use and specially designed for Command, Communications, Control and Intelligence (C3I) applications or Command, Communications, Control, Computer and Intelligence (C4I) applications;5. “Software” specially designed or modified for the conduct of military offensive cyber operations;Note 1: ML21.b.5. includes “software” designed to destroy, damage, degrade or disrupt systems, equipment or “software”, specified in this Schedule, and associated cyber reconnaissance and cyber command and control “software”.Note 2: ML21.b.5. does not apply to a “vulnerability disclosure” or to a “cyber incident response”, limited to non-military defensive cybersecurity readiness or response.c.“Software”, not specified in ML21.a. or ML21.b., specially designed or modified to enable equipment not specified in this Schedule to perform the military functions of equipment specified in this Schedule; N.B.: For general purpose “digital computers” with installed “software” specified by ML21.c., see systems, equipment or components specified in this schedule. d.Other “software” specially designed or modified for military use.N.B.:Source code for “software” is controlled in ML22.PL5001Other security and para-military police goods as follows:a.Acoustic devices represented by the manufacturers or suppliers thereof as suitable for riot control purposes, and specially designed components therefor;b.Anti-riot and ballistic shields and specially designed components therefor;N.B.:See also 2.1 of Annex III to “the torture Regulation”.c.Shackles designed for restraining human beings having an overall dimension including chain, when measured from the outer edge of one cuff to the outer edge of the other cuff, of between 240mm and 280mm when locked;N.B.:See also 1.1 of Annex III to “the torture Regulation”.d.Water cannon and specially designed components therefor;N.B.:See also 3.6 of Annex III to “the torture Regulation”.e.Riot control vehicles which have been specially designed or modified to be electrified to repel boarders and components therefor specially designed or modified for that purpose;f.Components specially designed or modified for portable devices designed or modified for the purposes of riot control or self-protection by the administration of an electric shock (e.g. electric-shock batons, electric-shock shields, stun-guns and electric-shock dart-guns).N.B.:See also article 42S of this Order.ML22“Technology” as follows:a.“Technology”, other than “technology” specified in ML22.b., which is “required” for the “development”, “production”, operation, installation, maintenance (checking), repair, overhaul or refurbishing of goods or “software” specified in this Schedule;b.“Technology” as follows:1.“Technology” “required” for the design of, the assembly of components into, and the operation, maintenance and repair of complete production installations for goods specified in this Schedule, even if the components of such production installations are not specified;2.This entry is not used;3.This entry is not used;4.“Technology” “required” exclusively for the incorporation of “biocatalysts”, specified in ML7.i.1, into military carrier substances or military material.N.B.:See article 18 and article 26 of this Order for exceptions from the controls on “technology”.