Statutory Instruments
Offshore Installations
Made
11th August 2008
Coming into force
1st September 2008
The Secretary of State makes this Order —
in exercise of the powers conferred on him by sections 22(1) and (2) of the Petroleum Act 1987(1) (“the Act”); and
for the purpose of giving effect to proposals submitted to him by the Health and Safety Executive under section 24(2A) of the Act.
1. This Order may be cited as the Offshore Installations (Safety Zones) (No.2) Order 2008 and shall come into force on 1st September 2008.
2. A safety zone is established around each installation specified in column 1 of the Schedule (being an installation stationed in waters to which subsection (7) of section 21 of the Petroleum Act 1987 applies) having a radius of five hundred metres from the point as respects that installation which has the co-ordinates of latitude and longitude according to European Datum (1950) specified in columns 2 and 3 of the Schedule.
Signed by the authority of the Secretary of State for Work and Pensions.
William D McKenzie
Parliamentary Under Secretary of State
Department for Work and Pensions
11th August 2008
Article 2
(1) Name or other designation of the offshore installation | (2) Latitude North | (3) Longitude |
|---|---|---|
| Chestnut Field Well 22/2A-15, Block 22/2A, Chestnut Field | 57° 57.04’ | 01° 12.92’ E |
| Galley Riser Base Structure, Block 15/23a, Galley Field | 58° 17.55’ | 00° 26.17’ E |
| Grouse Sub-Sea Wells, Block 21/19, Grouse Field | 57° 28.19’ | 00° 37.14’ E |
| Don Fields Single Anchor Loading Base, Block 211/18, Don Field | 61° 26.6’ | 01° 29.18’ E |
| West Don Well Centre, Block 211/18, Don Field | 61° 29.66’ | 01° 25.74’ E |
| Don Southwest Production Well Centre, Block 211/18, Don Field | 61° 28.07’ | 01° 32.09’ E |
| Don Southwest Injection Well Centre, Block 211/18, Don Field | 61° 28.08’ | 01° 33.44’ E |
| FFFA Centre, Block 31/26a, Fife Field | 56° 01.017’ | 03° 11.165’ E |
(This note is not part of the Order)
This Order establishes, under section 22 of the Petroleum Act 1987, safety zones having a radius of 500 metres from the point around each installation specified in the Schedule and stationed in waters to which section 21(7) of the Act applies (these include territorial waters and waters in areas designated under section 1(7) of the Continental Shelf Act 1964 (c.29)) (article 2).
Vessels, which for this purpose include hovercraft, submersible apparatus and installations in transit, are prohibited from entering or remaining in a safety zone except with the consent of the Health and Safety Executive or in accordance with regulations made under section 23(1) of the Act (currently the Offshore Installations (Safety Zones) Regulations (S.I. 1987/1331)).
1987 c.12; section 24(2A) was inserted by S.I. 1993/1823.