- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Supply of Machinery (Safety) Regulations 2008, PART 2.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Regulations 7(2)(e) and 8(1)(c)
1. | CONTENT | |
A. | [F1EC] DECLARATION OF CONFORMITY OF THE MACHINERY | |
This declaration and translations thereof must be drawn up under the same conditions as the instructions (see Annex I (Part 1 of this Schedule), section 1.7.4.1(a) and (b)), and must be typewritten or else handwritten in capital letters. | ||
This declaration relates exclusively to the machinery in the state in which it was placed on the market, and excludes components which are added and/or operations carried out subsequently by the final user. | ||
The [F1EC] declaration of conformity must contain the following particulars: | ||
1. | business name and full address of the manufacturer and, where appropriate, the manufacturer's authorised representative; | |
2. | name and address of the person authorised to compile the technical file [F2, who must be established in [F3a relevant] state]; | |
3. | description and identification of the machinery, including generic denomination, function, model, type, serial number and commercial name; | |
4. | a sentence expressly declaring that the machinery fulfils all the relevant provisions of [F4the Directive] [F4these Regulations] and where appropriate, a similar sentence declaring the conformity with other [F5Directives and/or] [F5enactments or] relevant provisions with which the machinery complies. [F6These references must be those of the texts published in the Official Journal of the European Union]; | |
5. | where appropriate, the name, address and identification number of the [F7notified] [F7approved] body which carried out the [F8EC type-] [F8Type-] examination referred to in Annex IX (Part 9 of this Schedule) and the number of the [F8EC type-] [F8Type-] examination certificate; | |
6. | where appropriate, the name, address and identification number of the [F9notified] [F9approved] body which approved the full quality assurance system referred to in Annex X (Part 10 of this Schedule); | |
7. | where appropriate, a reference to the [F10published harmonised] [F10designated] standards used; | |
8. | where appropriate, the reference to other technical standards and specifications used; | |
9. | the place and date of the declaration; | |
10. | the identity and signature of the person empowered to draw up the declaration on behalf of the responsible person. | |
B. | DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY | |
This declaration and translations thereof must be drawn up under the same conditions as the instructions (see Annex I (Part 1 of this Schedule), section 1.7.4.1(a) and (b)), and must be typewritten or else handwritten in capital letters. | ||
The declaration of incorporation must contain the following particulars: | ||
1. | business name and full address of the manufacturer of the partly completed machinery and, where appropriate, the manufacturer's authorised representative; | |
2. | name and address of the person authorised to compile the relevant technical documentation [F11, who must be established in [F3a relevant] state]; | |
3. | description and identification of the partly completed machinery including generic denomination, function, model, type, serial number and commercial name; | |
4. | a sentence declaring which essential health and safety requirements are applied and fulfilled and that the relevant technical documentation is compiled in accordance with Annex VII (Part 7 of this Schedule), part B, and, where appropriate, a sentence declaring the conformity of the partly completed machinery with other relevant [F12Directives] [F12enactments]. [F13These references must be those of the texts published in the Official Journal of the European Union]; | |
5. | an undertaking to transmit, in response to a reasoned request by the national authorities, relevant information on the partly completed machinery. This shall include the method of transmission and shall be without prejudice to the intellectual property rights of the manufacturer of the partly completed machinery; | |
6. | a statement that the partly completed machinery must not be put into service until the final machinery into which it is to be incorporated has been declared in conformity with the provisions of [F14the Directive] [F14these Regulations], where appropriate; | |
7. | the place and date of the declaration; | |
8. | the identity and signature of the person empowered to draw up the declaration on behalf of the responsible person. | |
2. | CUSTODY | |
The manufacturer of machinery or the manufacturer's authorised representative shall keep the original [F15EC] declaration of conformity for a period of at least 10 years from the last date of manufacture of the machinery. | ||
The manufacturer of partly completed machinery or the manufacturer's authorised representative shall keep the original declaration of incorporation for a period of at least 10 years from the last date of manufacture of the partly completed machinery. |
Textual Amendments
F1Word in Sch. 2 Pt. 2 omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 24(2)(a) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F2Words in Sch. 2 Pt. 2 omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 24(2)(b) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F3Words in Sch. 2 Pt. 2 substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 4 para. 7(b)
F4Words in Sch. 2 Pt. 2 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 24(2)(c)(i) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F5Words in Sch. 2 Pt. 2 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 24(2)(c)(ii) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F6Words in Sch. 2 Pt. 2 omitted (E.W.S) (9.12.2021) by virtue of The Product Safety and Metrology etc. (Amendment) Regulations 2021 (S.I. 2021/1273), regs. 1, 9
F7Words in Sch. 2 Pt. 2 substituted (E.W.S.) (31.12.2020) by S.I. 2019/696, Sch. 12 para. 24(2)(d)(ii) (as substituted by The Product Safety, Metrology and Mutual Recognition Agreement (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1246), regs. 1(3), 11(a); 2020 c. 1, Sch. 5 para. 1(1))
F8Word in Sch. 2 Pt. 2 substituted (E.W.S.) (31.12.2020) by S.I. 2019/696, Sch. 12 para. 24(2)(d)(i) (as substituted by The Product Safety, Metrology and Mutual Recognition Agreement (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1246), regs. 1(3), 11(a); 2020 c. 1, Sch. 5 para. 1(1))
F9Word in Sch. 2 Pt. 2 substituted (E.W.S.) (31.12.2020) by S.I. 2019/696, Sch. 12 para. 24(2)(da) (as inserted by The Product Safety, Metrology and Mutual Recognition Agreement (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1246), regs. 1(3), 11(b); 2020 c. 1, Sch. 5 para. 1(1))
F10Word in Sch. 2 Pt. 2 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 24(2)(e) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F11Words in Sch. 2 Pt. 2 omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 24(3)(a) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F12Word in Sch. 2 Pt. 2 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 24(3)(b)(i) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F13Words in Sch. 2 Pt. 2 omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 24(3)(b)(ii) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F14Words in Sch. 2 Pt. 2 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 24(3)(c) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F15Word in Sch. 2 Pt. 2 omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 24(4) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: