(a)Unless falling within Part A(1) or Part A(2) of this Section or Part A(2)(c) of Section 2.1, any process (other than for the repainting or re-spraying of or of parts of aircraft or road or railway vehicles) for applying to a substrate, or drying or curing after such application, printing ink or paint or any other coating material as, or in the course of, a manufacturing activity, where the process may result in the release into the air of particulate matter or of any volatile organic compound and is likely to involve the use in any period of 12 months of—
(i)20 or more tonnes of printing ink, paint or other coating material which is applied in solid form,
(ii)20 or more tonnes of any metal coating which is sprayed on in molten form,
(iii)25 or more tonnes of organic solvents in respect of any cold set web offset printing activity or any sheet fed offset litho printing activity, or
(iv)5 or more tonnes of organic solvents in respect of any activity not mentioned in sub-paragraph (iii).
(b)Unless falling within Part A(2) of this Section, repainting or re-spraying road vehicles or parts of them if the activity may result in the release into the air of particulate matter or of any volatile organic compound and the carrying on of the activity is likely to involve the use of 1 or more tonne of organic solvents in any period of 12 months.
(c)Repainting or re-spraying aircraft or railway vehicles or parts of them if the activity may result in the release into the air of particulate matter or of any volatile organic compound and the carrying on of the activity is likely to involve the use in any period of 12 months of—
(i)20 or more tonnes of any paint or other coating material which is applied in solid form,
(ii)20 or more tonnes of any metal coatings which are sprayed on in molten form, or
(iii)5 or more tonnes of organic solvents.