- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made).
71. In this Part of these Regulations, the expressions mentioned in column 1 of the Table shall have the meanings given in column 2 of that Table and related expressions shall be construed accordingly.
Column 1 | Column 2 |
---|---|
“CE marking” | The marking referred to in regulation 16 of the Pressure Equipment Regulations 1999(1). |
“conformity assessment procedures” | The procedures set out in Part I of Annex IV to the Transportable Pressure Equipment Directive, except that references to “national authorities” shall be treated as if they were references to “competent authority”. |
“conformity marking” | The marking referred to in regulation 80 as set out in Annex VII to the Transportable Pressure Equipment Directive. |
“conformity reassessment procedures” | The procedures set out in Part II of Annex IV to the Transportable Pressure Equipment Directive except that references to— |
“periodic inspection procedures” | The procedures set out in Part III of Annex IV to the Transportable Pressure Equipment Directive except that references to— (a) “holder” shall be omitted; (b) “this Directive” and “the Annexes to Directives 94/55/EC and 96/49/EC” shall be treated as if they were references to “Part 4 of the Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations 2007”; and (c) “inspection body” shall be treated as if they were references to “notified or approved bodies”. |
“the Transportable Pressure Equipment Directive” | Council Directive 1999/36/EC of 29th April 1999(2) concerning the approximation of laws of member States relating to common provision for transportable pressure equipment and methods for inspection. |
S.I. 1999/2001, amended by S.I. 2002/1267.
O.J. No. L138, 1.6.1999, p. 20; last amended by Commission Directive 2002/50/EC of 6th June 2002 (O.J. No. L149, 7.6.2002, p. 28).
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: