Regulations 44 and 45
1. The Transport Index (TI) for a package, overpack, freight container, or for unpackaged LSA-I or SCO-I, must be the number derived in accordance with the following procedure—
(a)determine the maximum radiation level in units of mSv/h at a distance of 1 metre from the external surfaces of the package, overpack, freight container, or unpackaged LSA-I and SCO-I. Multiply the value determined by 100. For uranium and thorium ores and their concentrates, the maximum radiation level at any point 1 metre from the external surface of the load may be taken as:
(i)0.4 mSv/h for ores and physical concentrates of uranium and thorium;
(ii)0.3 mSv/h for chemical concentrates of thorium; or
(iii)0.02 mSv/h for chemical concentrates of uranium, other than uranium hexafluoride;
(b)for tanks, freight containers and unpackaged LSA-I and SCO-I, the value determined in step (a) above must be multiplied by the appropriate factor from Table VI of Schedule 1;
(c)the figure obtained in steps (a) and (b) above must be rounded up to the first decimal place (e.g., 1.13 becomes 1.2), except that a value of 0.05 or less may be considered as zero.
2. The TI for each overpack, freight container or vehicle must be determined as either the sum of the TIs of all the packages contained, or by direct measurement of radiation level, except in the case of non-rigid overpacks for which the transport index must be determined only as the sum of the TIs of all of the packages.
3. The Criticality Safety Index (CSI) for packages containing fissile material must be obtained by dividing the number 50 by the value of N derived using the procedures specified in paragraph 8 of Part XIV of Schedule 8 (i.e., CSI = 50/N). The value of the CSI may be zero, provided that an unlimited number of packages is subcritical (i.e., N is effectively equal to infinity).
4. The CSI for each consignment must be determined as the sum of the CSIs of all of the packages contained in that consignment.