(1)    P el for welding generators: conventional welding current multiplied by the conventional load voltage for the lowest value of the duty factor given by the manufacturer    P el for power generators: prime power according to ISO 8528–1:1993, point 13.3.2    ,
 (2)    Indicative figures only. Definitive figures will depend on amendment of the Directive following the report required in Article 20(3). In the absence of any such amendment, the figures for stage I will continue to appy for stage II.    ,
The permissible sound power level shall be rounded to the nearest whole number (less than 0.5 use lower number; greater than or equal to 0.5 use higher number).,
Compaction machines (vibrating rollers, vibratory plates, vibratory rammers),   P ≤8      8< P ≤70      P >70    ,   108      109      89 + 11 lg P    ,   105      106      86 + 11 lg P    ,
Tracked dozers, tracked loaders, tracked excavator-loaders,   P ≤ 55      P > 55    ,   106      87 + 11 lg P    ,   103      84 + 11 lg P    ,
Wheeled dozers, wheeled loaders, wheeled excavator-loaders, dumpers, graders, loader-type landfill compactors, combustion-engine driven counter balanced lift trucks, mobile cranes, compaction machines (non-vibrating rollers), paver-finishers, hydraulic power packs,   P ≤55      P >55    ,   104      85 + 11 lg P    ,   101      82 + 11 lg P    ,
Excavators, builders' hoists for the transport of goods, constrction winches, motor hoes,   P ≤15      P >15    ,   96      83 + 11 lg P    ,   93      80 + 11 lg P    ,
Hand-held concrete-breakers and picks,   m ≤15      15 < m < 30      m ≥ 30    ,   107      94 + 11 lg m      96 + 11 lg m    ,   105      92 + 11 lg m      94 + 11 lg m    ,
Tower cranes,,98 + lg P,96 + lg P,
Welding and power generators,   P el ≤ 2      2 < P el ≤ 10      P el > 10    ,   97 + lg P el      98 + lg P el      97 + lg P el    ,   95 + lg P el      96 + lg P el      95 + lg P el    ,
Compressors,   P ≤ 15      P > 15    ,   99      97 + 2 lg P    ,   97      95 + 2 lg P    ,
Lawnmowers lawn trimmers/lawn edge trimmers,   L ≤ 50      50 < L ≤ 70      70 < L ≤ 120      L > 120    ,   96      100      100      105    ,   94      98      98      103    ,

1,1,0,1.5m,
2,0.7,0.7,1.5m,
3,0,1,1.5m,
4,-0.7,0.7,1.5m,
5,-1,0,1.5m,
6,-0.7,-0.7,1.5m,
7,0,-1,1.5m,
8,0.7,-0.7,1.5m,
9,0.65,0.27,0.71 r,
10,-0.27,0.65,0.71 r,
11,-0.65,0.27,0.71 r,
12,0.27,-0.65,0.71 r,

m < 10,2m,0.75m,
m ≥ 10,4m,1.50m,
conveying system,at least 10% of maximum value,
spreading system,at least 40% of maximum value,
tamper (speed, stroke),at least 50% of maximum value,
vibrators (speed, unbalance moment),at least 50% of maximum value,
pressure bars (frequency, pressure),at least 50 per cent of maximum value,
— length:,150 mm ±0.5 mm,
— nominal external diameter:,90 mm + 0.3/− 0 mm,
— nominal depth:,6.7 mm + 0.9/− 0 mm,