1998 No. 1177
The Measuring Instruments (EEC Requirements) (Fees) Regulations 1998
Made
Laid before Parliament
Coming into force
The Secretary of State for Trade and Industry, with the consent of the Treasury, in exercise of the powers conferred on her by section 56(1) and (2) of the Finance Act 19731 and of all other powers enabling her in that behalf, hereby makes the following Regulations:
Citation, commencement and revocation1
1
These Regulations may be cited as the Measuring Instruments (EEC Requirements) (Fees) Regulations 1998 and shall come into force on 1st June 1998.
2
The Measuring Instruments (EC Requirements) (Fees) Regulations 19932, the Measuring Instruments (EC Requirements) (Fees) (Amendment) Regulations 19953, the Measuring Instruments (EC Requirements) (Fees) (Amendment) Regulations 19964 and the Measuring Instruments (EC Requirements) (Fees) (Amendment) Regulations 19975 are hereby revoked.
Interpretation2
1
In these Regulations—
“the 1988 principal Regulations” means the Measuring Instruments (EEC Requirements) Regulations 19986; and
“the 1995 principal Regulations” means the Non-automatic Weighing Instruments (EEC Requirements) Regulations 19957.
“approved body”, “approved type”, “EC type-approval certificate”, “EC unit verification”, “instrument” and “sticker” shall have the same meanings as in the 1995 principal Regulations.
2
The services referred to in these Regulations are those services mentioned or referred to in Schedule 1 hereto.
Fees relating to EEC initial verification of certain instruments and systems3
1
The fees payable in connection with the services provided by the Department of Trade and Industry relating to EEC initial verification pursuant to regulation 13(9) of, and Schedule 3 to, the 1988 principal Regulations shall be determined and payable in accordance with Schedule 2 to these Regulations, whether or not the instrument passes the EEC initial verification.
2
The fees payable in connection with the services provided by the Department of Trade and Industry relating to EEC initial verification pursuant to regulation 7 of the Alcoholometers and Alcohol Hydrometers (EEC Requirements) Regulations 19778 shall be determined and payable in accordance with Schedule 2 to these Regulations, whether or not the instrument passes the EEC initial verification.
Fees relating to EEC pattern approval4
1
The fees payable in connection with the services provided by the Department of Trade and Industry relating to the grant and extension of EEC pattern approval and modifications or additions to EEC approved patterns pursuant to regulation 8 of, and Schedule 2 to, the 1988 principal Regulations shall be determined and payable in accordance with Schedule 3 to these Regulations, whether or not EEC pattern approval is granted or extended as the case may be.
2
In the case of alcoholometers and alcohol hydrometers and taximeters, in respect of which regulation 8 of, and Schedule 2 to, the 1988 principal Regulations are applied by regulation 5 of the Alcoholometers and Alcohol Hydrometers (EEC Requirements) Regulations 1977 and regulation 6 of the Taximeters (EEC Requirements) Regulations 19799 respectively, the fees shall be determined and payable in accordance with paragraph (1) above.
Fees relating to designation of approved bodies5
The fees payable in connection with the services provided by the Department of Trade and Industry relating to the designation of approved bodies pursuant to regulation 9 of the 1995 principal Regulations shall be determined and payable in accordance with Schedule 4 to these Regulations, whether the body is designated or not.
Fees relating to the grant of an EC type-approval certificate6
The fees payable in connection with the services provided by the Department of Trade and Industry in relation to the grant or exension of an EC type-approval certificate and the issue of an addition to an original EC type-approval certificate pursuant to regulation 10 of the 1995 principal Regulations shall be determined and payable in accordance with Schedule 5 to these Regulations, notwithstanding that the Secretary of State may not grant or extend the EC type-approval certificate or issue an addition to the original EC type-approval certificate in accordance with regulations 10(3), (4) and (9) respectively.
Fees relating to EC unit verification7
The fees payable in connection with the services provided by the Department of Trade and Industry relating to EC unit verification pursuant to regulation 12 of the 1995 principal Regulations shall be determined and payable in accordance with Schedule 6 to these Regulations, notwithstanding that the Secretary of State may refuse to affix her identification number in accordance with regulation 12(5) of the 1995 principal Regulations.
Consolidated Fund8
All fees received under these Regulations shall be paid into the Consolidated Fund.
We consent,
SCHEDULE 1
PART 1
Council Directive No. | Subject Matter | Pattern Approval | Initial Verification |
|---|---|---|---|
71/319/EEC10 | Meters for liquids other than water | Yes | Meters for pressurised liquefied gas only |
The measuring of the standard mass per storage volume of grain | Yes | Yes | |
Ancillary equipment for meters for liquids other than water | Yes | No | |
Non-automatic weighing machines | No | Machines of class of special or high accuracy only | |
Material measures of length | Yes | Measures in Class I only | |
74/148/EEC19 | Above-medium accuracy weights | No | Yes |
75/33/EEC20 | Cold-water meters | Yes | No |
75/410/EEC21 | Continuous totalising weighing machines | Yes | No |
76/765/EEC22 | Alcoholometers and alcohol hydrometers | Yes | Yes |
77/95/EEC23 | Taximeters | Yes | Yes |
Measuring systems for liquids other than water | Yes, for those systems specified in section 3.3.3 of the Annex to the Directive | Pressurised liquefied gas measuring systems only | |
78/1031/EEC26 | Automatic checkweighing and weight grading machines | Yes | No |
79/830/EEC27 | Hot-water meters | Yes | No |
86/217/EEC28 | Tyre pressure gauges for motor vehicles | Yes | No |
PART 2
SCHEDULE 2FEES FOR EEC INITIAL VERIFICATION OF CERTAIN INSTRUMENTS AND SYSTEMS
1
Where regulation 13(9) of the 1998 principal Regulations applies (EEC initial verification), the fee shall be—
a
an amount in respect of any time calculated to the nearest quarter of an hour (a period of 7½ minutes being rounded up to a quarter of an hour) taking to conduct the initial verification at the rate of £65.00 per hour, due and payable as indicated in paragraph 3 below; and
b
the amount of additional expenses, if any, incurred by or occasioned to the Secretary of State by reason of any part of the initial verification taking place at a place other than the National Weights and Measures Laboratory of the Department of Trade and Industry, due and payable as indicated in paragraph 3 below.
2
Where regulation 7 of the Alcoholometers and Alcohol Hydrometers (EEC Requirements) Regulations 197731 applies (initial verification) there shall be a fixed fee of £52.00, payable as indicated in paragraphs 3 and 4 below.
3
Subject to paragraph 4 below, the amounts referred to in paragraph 1(a) and (b) above shall be due and payable on the service on the applicant of an invoice from the Secretary of State monthly in arrears.
4
On completion of the initial verification, the Secretary of State shall serve an invoice on the applicant for the amount of the fees, together with notification that the initial verification has been completed, and the amount shall, before notification of the result, be due and payable to the Secretary of State.
SCHEDULE 3FEES FOR EEC PATTERN APPROVAL
1
Where regulation 8(1), (2) or (5) of the 1988 principal Regulations applies (application for grant of EEC pattern approval or for modification or additions to, or for extension of, an EEC approved pattern), the fees shall be—
a
the amount in respect of any time calculated to the nearest quarter of an hour (a period of 7½ minutes being rounded up to a quarter of an hour) taken by examination staff conducting the examination at the rate of £65.00 per hour and by equipment test unit staff in testing the pattern at £65.00 per hour, including any time spent travelling, and any time during which the pattern is tested in an environmental testing chamber at the rate of £15.00 per hour, due and payable as indicated in paragraphs (2) and (3) below; and
b
the amount of additional expenses, if any, incurred by or occasioned to the Secretary of State, by reason of any part of the examination taking place at a place other than the National Weights and Measures Laboratory of the Department of Trade and Industry, due and payable as indicated in paragraphs (2) and (3) below.
2
Subject to paragraph 3 below, the amounts referred to in paragraph (1)(a) and (b) above shall be due and payable on the service on the applicant of an invoice from the Secretary of State monthly in arrears.
3
On completion of the examination, the Secretary of State shall serve an invoice on the applicant for the final amount of the fees, together with the notification of such completion, and the final amount shall, before notification of the result, be due and payable to the Secretary of State.
SCHEDULE 4FEES FOR DESIGNATION AND INSPECTION OF APPROVED BODIES
1
Where regulation 9(1) of the 1995 principal Regulations applies (designation of approved bodies) the fees are as follows—
a
a fixed fee of £260.00 to cover the costs of considering each initial application for designation; and
b
the amount of additional expense, if any, incurred by or occasioned to the Secretary of State by reason of any part of the consideration of such an application taking place at a place other than the National Weights and Measures Laboratory of the Department of Trade and Industry; and
c
the amount of additional expense, if any, incurred by or occasioned to the Secretary of State by reason of employing the assistance of a third party for the consideration of any such application;
and the total shall be due and payable as indicated in paragraph 2 below.
2
On completion of the consideration of the application for designation, the Secretary of State shall serve an invoice on the applicant for the amount of the fees, together with notification that the consideration of the application for designation has been completed, and the amount shall, before notification of the result, be due and payable to the Secretary of State.
3
Where regulation 9(5) of the 1995 principal Regulations applies (inspection of approved bodies) the fees shall be calculated on the same basis, and shall be due and payable in the same manner, as those relating to designation under paragraph 1 above except that, for the fixed fee of £260 for which paragraph 1(a) provides, there shall be substituted an amount in respect of any time calculated to the nearest quarter of an hour (a period of 7½ minutes being rounded up to a quarter of an hour) taken by staff employed in conducting the inspection at a rate of £75 per hour (including any time spent in travelling).
4
On completion of the consideration of the application for designation or for variation or amendment of an approval or of the inspection, the Secretary of State shall serve an invoice on the applicant or approved body for the amount of the fees, together with notification that the consideration of the application, or the inspection, as appropriate, has been completed, and the amount shall, before notification of the result of such consideration or inspection, be due and payable to the Secretary of State.
SCHEDULE 5FEES RELATING TO THE GRANT OF AN EC TYPE-APPROVAL CERTIFICATE
1
Where regulation 10 of the 1995 principal Regulations applies (application for the grant of an EC type-approval certificate or for the extension of an EC type-approval certificate or for the approval of modifications or additions of an approved type), the fees shall be the aggregate of any one or more of the following—
a
the amount in respect of any time calculated to the nearest quarter of an hour (a period of 7½ minutes being rounded up to a quarter of an hour) taken by examination staff conducting the examination at the rate of £65 per hour and by equipment test unit staff in testing the type at the rate of £65 per hour (including any time spent in travelling);
b
the amount in respect of any time during which the type is:—
i
tested in an environmental testing chamber at the rate of £15 per hour;
ii
tested for electromagnetic compatibility at the rate of £60 per hour;
c
the amount of additional expense, if any, incurred by or occasioned to the Secretary of State, by reason of any part of the examination or testing taking place at a place other than the National Weights and Measures Laboratory of the Department of Trade and Industry;
d
the amount of additional expense, if any, incurred by or occasioned to the Secretary of State by reason of employing the assistance of a third party in the examination or testing;
and shall be due and payable as indicated in paragraphs 2 and 3 below.
2
Subject to paragraph 3 below, the amounts referred to in paragraph (1)(a), (b), (c) and (d) above shall be due and payable upon the service on the applicant of an invoice from the Secretary of State monthly in arrears.
3
On completion of the examination and testing, the Secretary of State shall serve an invoice on the applicant for the final amount of the fees, together with a notification of such completion, and the final amount shall, before notification of the result, be due and payable to the Secretary of State.
SCHEDULE 6FEES FOR EC UNIT VERIFICATION
1
Where regulation 12 of the 1995 principal Regulations applies (application for EC unit verification) the fees shall be the aggregate of any one or more of the following—
a
the amount in respect of any time calculated to the nearest quarter of an hour (a period of 7½ minutes being rounded up to a quarter of an hour) taken by examination staff conducting the examination at the rate of £65.00 per hour and by equipment test unit staff in testing the instrument at the rate of £65.00 per hour, including any time spent in travelling;
b
the amount in respect of any time during which the instrument is:—
i
tested in an environmental testing chamber, at the rate of £15.00 per hour;
ii
tested for electromagnetic compatibility, at the rate of £60.00 per hour;
c
the amount of additional expense, if any, incurred by or occasioned to the Secretary of State, by reason of any part of the examination or testing taking place at a place other than the National Weights and Measures Laboratory of the Department of Trade and Industry;
d
the amount of additional expense, if any, incurred by or occasioned to the Secretary of State by reason of employing the assistance of a third party in the consideration of the application for EC unit verification;
and shall be due and payable as indicated in paragraphs 2 and 3 below.
2
Subject to paragraph 3 below, the amounts referred to in paragraph (1)(a), (b), (c) and (d) above shall be due and payable upon the service on the applicant of an invoice from the Secretary of State monthly in arrears.
3
On completion of the examination and testing the Secretary of State shall, serve an invoice on the applicant for the final amount of the fees together with a notification of such completion, and the amount shall, before notification of the result, be due and payable to the Secretary of State.
(This note is not part of the Regulations)