xmlns:atom="http://www.w3.org/2005/Atom" xmlns:atom="http://www.w3.org/2005/Atom"
33. No person shall manufacture an additive of any kind referred to in the fourth to the ninth indents of Chapter I.1(a) of the Annex, with a view to putting it into circulation, except on a UK approved or permitted Article 2.2(a)(A) establishment.
Commencement Information
I1Reg. 33 in force at 6.5.1998, see reg. 1
34. No person shall manufacture an additive of any kind to which regulation 33 applies on a UK approved Article 2.2(a)(A) establishment, with a view to putting it into circulation, unless he fulfils the essential conditions contained or referred to in Chapter I.1(b) of the Annex.
Commencement Information
I2Reg. 34 in force at 6.5.1998, see reg. 1
35. No person shall manufacture an additive of any kind the manufacture of which is regulated by Article 7.2(a) of Directive 95/69, with a view to putting it into circulation, except on a UK registered or permitted Article 7.2(a) establishment.
Commencement Information
I3Reg. 35 in force at 6.5.1998, see reg. 1
36. No person shall manufacture an additive of any kind to which regulation 35 applies on a UK registered Article 7.2(a) establishment, with a view to putting it into circulation, unless he fulfils the essential conditions contained or referred to in Chapter II(c) of the Annex.
Commencement Information
I4Reg. 36 in force at 6.5.1998, see reg. 1
37. No intermediary shall wrap, package or store an additive of any kind referred to in the fourth to the ninth indents of Chapter I.1(a) of the Annex, other than a UK approved or permitted Article 3.1(A) intermediary.
Commencement Information
I5Reg. 37 in force at 6.5.1998, see reg. 1
38. No UK approved Article 3.1(A) intermediary shall wrap, package or store an additive of any kind to which regulation 37 applies, unless he fulfils the essential conditions contained or referred to in point 7 of Chapter I.1(b) of the Annex.
Commencement Information
I6Reg. 38 in force at 6.5.1998, see reg. 1
39. No intermediary shall wrap, package or store an additive of any kind the wrapping, packaging, storing and putting into circulation of which is regulated by Article 8.1 of Directive 95/69, other than a UK registered or permitted Article 8.1(A) intermediary.
Commencement Information
I7Reg. 39 in force at 6.5.1998, see reg. 1
40. No UK registered Article 8.1(A) intermediary shall wrap, package or store an additive of any kind to which regulation 39 applies, unless he fulfils the essential conditions contained or referred to in point 7 of Chapter II(c) of the Annex.
Commencement Information
I8Reg. 40 in force at 6.5.1998, see reg. 1
41. No intermediary shall put into circulation an additive of any kind to which regulation 37 applies, other than an EC or UK approved or permitted Article 3.1(A) intermediary.
Commencement Information
I9Reg. 41 in force at 6.5.1998, see reg. 1
42. No EC or UK approved Article 3.1(A) intermediary shall put into circulation an additive of any kind to which regulation 37 applies, unless he fulfils the essential conditions contained or referred to in point 7 of Chapter I.1(b) of the Annex.
Commencement Information
I10Reg. 42 in force at 6.5.1998, see reg. 1
43. No intermediary shall put into circulation an additive of any kind to which regulation 39 applies, other than an EC or UK registered or permitted Article 8.1(A) intermediary.
Commencement Information
I11Reg. 43 in force at 6.5.1998, see reg. 1
44. No EC or UK registered Article 8.1(A) intermediary shall put into circulation an additive of any kind to which regulation 39 applies, unless he fulfils the essential conditions contained or referred to in point 7 of Chapter II(c) of the Annex.
Commencement Information
I12Reg. 44 in force at 6.5.1998, see reg. 1
45.—(1) No person shall put into circulation an additive of any kind referred to in the fourth to ninth indents of Chapter I.1(a) of the Annex, except an additive of any such kind manufactured on a UK approved or permitted Article 2.2(a)(A) establishment, an EC approved or permitted Article 2.2(a)(A) establishment or an establishment located in a third country.
(2) No person shall put into circulation an additive of any kind the manufacture of which is regulated by Article 7.2(a) of Directive 95/69, except an additive of any such kind manufactured on a UK registered or permitted Article 7.2(a) establishment, an EC registered or permitted Article 7.2(a) establishment or an establishment located in a third country.
Commencement Information
I13Reg. 45 in force at 6.5.1998, see reg. 1
46.—(1) Subject to paragraph (2), no person shall supply, as an additive, any copper, selenium, vitamin A or vitamin D, unless—
(a)the additive concerned has been manufactured on—
(i)a UK approved or permitted Article 2.2(a)(A) establishment,
(ii)an EC approved or permitted Article 2.2(a)(A) establishment, or
(iii)an establishment located in a third country, and
(b)the additive concerned—
(i)is supplied to—
(A)a UK approved or permitted Article 2.2(b) establishment,
(B)an establishment located in the United Kingdom which, pursuant to the Feedingstuffs (Zootechnical Products) Regulations 1998(1), has been approved for the manufacture on that establishment of a zootechnical premixture, or on which it is permitted under those Regulations to manufacture such a premixture,
(C)an EC approved or permitted Article 2.2(b) establishment,
(D)a UK approved or permitted Article 3.1(A) intermediary,
(E)an EC approved or permitted Article 3.1(A) intermediary,
(F)a UK registered or permitted Article 7.2(c)(PA) establishment, engaged in the manufacture of compound feeding stuffs for pet animals,
(G)an EC registered or permitted Article 7.2(c)(PA) establishment, engaged as aforesaid,
(H)a UK registered or permitted Article 7.2(d)(PA) establishment, engaged as aforesaid, or
(I)an EC registered or permitted Article 7.2(d)(PA) establishment, engaged as aforesaid,
or
(ii)is supplied by way of export to a third country, and the requirement specified in Article 22 of Directive 70/524 is satisfied in relation to it.
(2) Notwithstanding paragraph (1), copper, selenium, vitamin A or vitamin D may be delivered at the last stage of circulation, as an additive, to—
(a)a UK registered or permitted Article 7.2(c)(PA) establishment, or
(b)an EC registered or permitted Article 7.2(c)(PA) establishment,
if the requirements specified in the first and, in the case of registered establishments, third, indented paragraphs of Article 13.4(b) of Directive 70/524 are satisfied.
Commencement Information
I14Reg. 46 in force at 6.5.1998, see reg. 1
47. No person shall incorporate into a compound feeding stuff any copper, selenium, vitamin A or vitamin D, unless—
(a)the additive concerned has been prepared beforehand, in a premixture containing a substance used as a carrier, but not containing a zootechnical additive, on an EC or UK approved or permitted Article 2.2(b) establishment, or an establishment located in a third country, and he incorporates the premixture in accordance with regulation 62,
(b)the additive concerned has been prepared beforehand, in a premixture containing a substance used as a carrier, and containing also a zootechnical additive, on—
(i)an establishment located in the United Kingdom which, pursuant to the Feedingstuffs (Zootechnical Products) Regulations 1998, has been approved for the manufacture on that establishment of a zootechnical premixture, or on which it is permitted under those Regulations to manufacture such a premixture,
(ii)an EC approved or permitted Article 2.2(b) establishment, or
(iii)an establishment located in a third country
and he incorporates the premixture in accordance with regulation 51 of those Regulations,
(c)the incorporation is carried out on a UK registered or permitted Article 7.2(c)(PA) establishment, and the requirements specified in the first and, in the case of registered establishments, third, indented paragraphs of Article 13.4(b) of Directive 70/524 are satisfied, or
(d)the incorporation is carried out on—
(i)a UK registered or permitted Article 7.2(c)(PA) establishment, or
(ii)a UK registered or permitted Article 7.2(d)(PA) establishment,
engaged in the manufacture of compound feeding stuffs for pet animals.
Commencement Information
I15Reg. 47 in force at 6.5.1998, see reg. 1
S.I. 1998/1047.