- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
Regulation 1(2)
1. Each approval certificate issued by a competent authority shall be assigned an identification mark.
2. The mark shall be of the following generalised type— “VRI/Number/Type Code”, where—
(a)“VRI” represents the international vehicle registration identification code of the state issuing the certificate;
(b)“Number” represents the number assigned by the competent authority, which shall be unique with regard to the particular design or shipment; and
(c)“Type Code” represents the code used to indicate the type of approval certificate issued as follows—
AF | Type A package design for fissile material |
B(U) | Type B(U) package design, (B(U)F if for fissile material) |
B(M) | Type B(M) package design, (B(M)F if for fissile material) |
IF | Industrial package design for fissile material |
S | Special form radioactive material |
T | Shipment |
X | Special arrangement |
3. The shipment approval identification mark shall be clearly related to the design approval identification mark.
4. For package design approval certificates, other than those issued under the provisions of regulation 9, the symbols `—85' shall be added to the Type Code of the package design.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include: