- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made).
8.—(1) Subject to regulation 9(a) below, no person who is a responsible person shall place on the market any component to which these Regulations apply unless the requirements of paragraph (2) below have been complied with in relation thereto.
(2) The requirements of this paragraph, in respect of any component, are that—
(a)the appropriate conformity assessment procedure, in accordance with regulation 10(2) below, has been carried out by the person specified in regulation 6(2)(b) above; and
(b)it is accompanied by a certificate which has been issued by the manufacturer or his authorized representative established in the Community and which—
(i)declares the conformity of the component with the provisions of the ATEX Directive which apply to it; and
(ii)states its characteristics and how it must be incorporated into equipment or protective systems to assist compliance with the essential requirements applicable to finished equipment or protective systems.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include: