1. The number shown inside the rectangle in the markings in column (2) of Schedule 4 will be varied, where appropriate, so as to be the number assigned by the relevant Community Instrument to the country which has granted the approval.
2. The number shown outside and below the rectangle in any of the said markings will be varied, where appropriate, so as to be the number of the approval document issued for the motor vehicle part concerned.
3. The Roman numeral shown outside and immediately above the rectangle in the marking relating to item No. 2 in Schedule 4 will be varied, where appropriate, to be the Roman numeral signifying the class of the motor vehicle part concerned.
4. The number mentioned in paragraph 2 above and the Roman numeral mentioned in paragraph 3 above may be placed in any position in relation to the rectangle in the said marking so long as they are diametrically opposite to each other.
5. The arrow shown outside and immediately below the rectangle in the markings relating to item Nos. 5 and 8 in Schedule 4 indicate the side on which the photometric specifications are satisfied up to an angle of 80°H on front position (side) lamps or rear position (side) lamps whose geometric angles of visibility are asymmetrical in relation to the reference axis in a horizontal direction. The absence of an arrow means that, both left and right, the photometric specifications are satisfied up to an angle of 80°H on such lamps.
6. The absence of an arrow immediately below the rectangle in the marking relating to item No. 6 in Schedule 4 indicates that, both left and right, the photometric specifications are satisfied up to an angle of 80°H on rear position (side) lamps whose geometric angles of visibility are asymmetrical in relation to the reference axis in a horizontal direction. In cases where such lamps satisfy the said specifications up to an angle of 80°H only to the left or only to the right an arrow indicating the side to which the said specifications are so satisfied shall be added immediately below the rectangle in the said marking.
7. The number shown outside and immediately above the rectangle in the marking relating to item 9 in Schedule 4 will be varied, where appropriate, to be the number 1 or 2 where the direction indicator to which the marking relates belongs to category 1 or category 2, as the case may be, specified in the Community Instrument referred to in column (5) in relation to that item. The arrow shown outside and immediately below the said rectangle indicates in what position such of the direction indicators to which the said marking relates as can be mounted on one side of the vehicle shall be placed. The arrow shall be directed outwards from the vehicle in the case of a direction indicator in category 1 or category 2 specified in the said Community Instrument, and towards the front of the vehicle in the case of a direction indicator in category 5 specified in the said Community Instrument.
8. The number shown in the marking relating to items 20, 21, 24 and 25 in Schedule 4 below the rectangle surrounding the letter “e” shall be varied so as to be the type approval number relating to the motor vehicle part specified in column (3) of the said items, and that number may be placed in any convenient position near the said rectangle.
9.—(1) The marking relating to item 20 in Schedule 4 shall be affixed to the motor vehicle part specified in column (3) of the said item in such a way as to be indelible and clearly legible even when the said part is fitted to the vehicle.
(2) The marking relating to item 21 in Schedule 4 shall be affixed to the motor vehicle part specified in column (3) of the said item in such a way as to be indelible and clearly legible even when the said part is fitted to the vehicle.
(3) The marking relating to item 22 in Schedule 4 shall be affixed to the motor vehicle part specified in column (3) of the said item in such a way as to be indelible and clearly legible even when the said part is fitted to the vehicle.
10.—(1) In the marking relating to item 23 in Schedule 4 there shall be added above the rectangle:—
(a)the letter “A” in the case of a three-point belt,
(b)the letter “B” in the case of a lap belt, and
(c)the letter “S” in the case of a safety belt which is neither a three-point belt nor a lap belt.
(2) The letters referred to in sub-paragraph (1) above shall be preceded by the letter “Z” when the safety belt is part of a restraint system.
(3) The letters referred to in sub-paragraph (1) above shall be supplemented by:—
(a)in the case of a safety belt fitted with an energy absorber, the letter “e”; and
(b)in the case of a safety belt fitted with a retractor, the letter “r” followed by:—
(i)the figure “1” if the retractor is a non-locking retractor, or
(ii)the figure “2” if the retractor is a manually unlocking retractor, or
(iii)the figure “3” if the retractor is an automatically locking retractor, or
(iv)the figure “4” if the retractor is an emergency locking retractor, and
(v)the letter “m” if the retractor is an emergency locking retractor with multiple sensitivity.